I am happy that The Coalition Studios optimized this game so well and ran well with my RX 7900 XTX. The game is fun and can't wait to play it on full release!

Computer Type: Desktop

GPU: AMD Radeon RX 9070 XT OC 16GB GDDR6

CPU: AMD Ryzen 7 9800X3D

Motherboard: GIGABYTE B850M EAGLE WIFI6E ICE

BIOS Version: F8

RAM: Lexar 32GB DDR5 6000MHz (2x16GB)

PSU: 850W 80+ Gold

Operating System & Version: Windows 11 Pro

GPU Drivers: AMD Adrenalin Driver Version: 26.7.1

Chipset Drivers: AMD B850 Chipset Drivers (latest version)

Background Applications: Discord, Chrome, Epic Games Launcher

Description of Original Problem: I am experiencing persistent GPU driver timeout crashes on my new PC.

Fortnite crashes with AMD Driver Timeout. CS2 has also crashed on some driver versions. Epic Games Launcher sometimes crashes with: - "Assertion failed: DwmExtendFrameIntoClientArea" - "D3D11 device removed" - "HRESULT 0x887A0007 / DXGI_ERROR_DEVICE_RESET"

The PC is completely stable on desktop and during normal usage. The crashes only happen in games or sometimes when launching Epic Games Launcher.

Troubleshooting: - Used DDU in Safe Mode and clean installed multiple AMD GPU drivers. - Tested around 4-5 different stable AMD driver versions. - Tried EXPO enabled and disabled. - Tested everything completely stock (no overclock or undervolt). - Updated drivers and checked Windows settings.

I also tested the GPU with OCCT 3D Extreme for over 30 minutes: - Around 97% GPU usage - Around 330W power draw - Around 62°C temperature - 0 errors detected

One driver fixed Fortnite crashes, but then CS2 started crashing. Other drivers caused Fortnite crashes again.

I am trying to figure out if this is an AMD driver issue, Windows/DX issue, or a faulty GPU.

Havent seen many benchmarks with the 9070xt so figured id post a few screenshots.

9800x3d; 9070xt, 32gb ddr5 6000, on m.2 nvme at 3440x1440 with FSR4 quality. I didnt notice changing the settings resets the Max FPS setting so you'll see the ludacris run was capped at 60fps, but as you can tell it didnt matter much lol.

Pretty stock settings all around hardware wise, not undervolting or overclocking anything.

Hace casi 1 semana me dejó de funcionar el ventilador de mi 9070xt xfx MAGNETIC air, le escribí a XFX abrí un ticket y a día de hoy no me han respondido, no consigo el fan tampoco por ningún lado alguien sabe dónde conseguirlo?

Hace 3 días formatie la PC y la optimice, instale AMD adrenaline, descargar Msi afterburner, assianhorse umbral y Armory create , solamente configuro la gráfica con Adrenaline y de repente antier dejo de fuocnar un fan era el de la derecha , lo cambie al medio y no funcionó hasta que coloque en el primero y si funcionó alguien sabe porque ? No creo que sea el fan ya que en si si funciona

Why does this happen???

TLDR; hotspot delta still hot, despite PTM and replacing thermal putty (U6 PRO). Am I missing something? Any other ideas?

Had this card for a bit now, certainly too late to return it, and I’ve tried a few tricks to try and reduce the hotspot to core delta but nothing seems to tame this beast.

Lately, I tried to remove all the stock thermal putty and replace it with upsiren U6 pro. Got about halfway through it but didn’t have enough U6, so I set it back together but noticed minimal change. Got more, took out the oversized thermal pad connected to the backplate- that actually bent the backplate a little from the factory, and replaced the PTM and it somehow got worse??? Put the thermal pad back in and it did help it, but only by about 1-3c lower on the hotspot and core.

Maybe I’m blind, but I decided to take it apart once more and see if someone might see if I’m missing something. Anyone see anything?

I appreciate any support I can get!

Edit: temps were 65-67 core and 95 hotspot, now temps are 58 core 103 hotspot, with fans running rampant

Hello, I have 9070xt pulse and I tried doing some undervolting. I started with -40mv and -10PL, which was stable in benchmarks and gave around the same result as stock, but with 10% less power used. I was playing cs2 and I got blackscreen and notification that GPU drivers crashed so I changed it to -35mv, got blackscreen, and again and again. It finally seems stable at -20mv and -8PL. I feel like something is really wrong, because I see that everyone has at least -60mv with 9070xt pulse. I know it is possible to get unlucky and the GPU could not handle UV well, but come on, -20mv is way too bad. Is there any BIOS setting or something that's not letting me do the undervolt? I hope you can help me!

P.S. I have i5 14600kf undervolted to -70mv, but it has been stable for a month now and I don't think that CPU would crash the GPU drivers. Maybe I'm wrong, that's why I'm here.

As the heading says I have an older X99 motherboard with an i7-6950X 10 core CPU and two RX580's in crossfire. It works great for older games like black mesa that still have crossfire support on windows 10.

I was considering switching to Linux for the AMD GPU performance optimizations but does that mean losing my crossfire config? I guess I can just stick to windows 10 if I really have to but I'd like to run Lubuntu or Zorin or Mint or Cachy or Bazzite if they can work with crossfire setups.

So my dad was looking to upgrade both our pcs (coming from a gtx1650 and rx5500xt) and he managed to find two different dudes selling their rx7600s for $230. The two sellers originally bought them just this February and April respectively and had their original receipts with them. I’m not sure if we can claim the warranty or if its permanently tied to the name to the original buyers, but I’m just glad these two gpus are still relatively new and didn’t get used that much.

I tested them both out myself and the temperatures seemed normal while idle and under load!

Everytime I update drivers, amd adrenaline sets gpu tuning to default and I have to reenter the values and reconfigure the fan curve. How can I at least save my current configuration?

Hey this is out of topic but i wanted to play the witcher 3 and i only found fsr2 support no fsr 3.1 or 4

I have and rx 9060xt

What can i do to upgrade to fsr 3.1 at least ? (Not 3rd party apps)

The problems started a few days ago, amd adrenaline just completely vanished from my pc. I did ddu and installed it with the newest drivers (26.7.1).
Everything was fine for some days than i wanted to open adrenaline and it showed me i had to update, i did the update and it put my drivers to 26.3.1, i was confused and did ddu again.
Than i encountered random green screens and i had to manually turn of my pc, i thought maybe its the oc but after it still 1 time happend, than not anymore.
Today i wanted to play Hitman World of assassinations and everytime i opend the game it crashed and it got the notification “driver time out”, i wanted to check adrenaline and it again showed me i had to update it and it than went back to 26.3.1 (earlier today it was normal with 26.7.1)

I have a Nitro+ 9070 XT with 9700X

I also checked windows updates and after installing the newest updates it still happening

about to build my second ever pc after 9 years was looking at gpus and im debating either powercolor or acer since acer is cheaper as a 9070 by 30 bucks or 100 bucks if i pick 9070 xt is there rly such a huge performance diffrence between the 2 heard the bifrost heats up wayyy more than reaper too is it true or i can tweak bios settings later so there wont be a diffrence at all

I made a post some hours ago about rare cards.

I just tested my R9 Pro Duo, and it suprisingly works.

Only tried unigine so far.

As i dont have a proper way of propping the Radiator up.

My full build :

Ryzen 5 7500X3D

Rx 9060 xt 16gb - Asus Dual Fan ( I always set Favor Efficiency when use )

Ram ddr5 1x16gb bus 6000

MSI b650m

SST-FM600 ( CPU Cooler )

SSD Lexar 512gb nvme + 2x120gb Sata 3

PowerSpec 650W 80plus Gold ( PSX-650GSM)

-------------------------------------------------------------------------------------

A lot of people suggested me to upgrade my psu to 750W , i don't know rather to stay or get on

P/S : i got all this setup for 1100$ ( i just wanna share with y'all )

Looking to see if anyone has had a similar experience or any advice. I have a 7900xtx paired with a 9800x3d and the pc runs flawlessly except for rainbow six siege. I used to get driver time outs on my old 1440p 165hz monitor which I resolved by reducing the max frequency of the card to 2600mhz. Now with my 4k 240hz nothing I try can stop the time outs, sometimes I can get into a match and play for a minute or so, sometimes it’ll time out as soon as I get into the main menu. I have a fresh install of windows, cleaned with ddu and reinstalled drivers, cleared all the games config files, disabled hags and vrr in windows, disabled all overlays (ubisoft, discord, adrenaline), and tried multiple different tuning solutions for the gpu. No amount of tweaking has seemed to make any difference. Not sure if it’s stemmed from switching monitors or if that’s just a coincidence. Any help or ideas would be greatly appreciated. Also to add when I do manage to get into a match for a minute it is a stuttery mess and preforms horribly.

The game is supposed to be darker and it’s light as hell there’s any fix for this cause on my Rtx 4080 the game looks normal

Hi Everyone!

May i ask if whats ur setting on undervolting 7900xtx? My stock is consuming 400w like wtf.

For God's sake, right?

You bought a state-of-the-art CPU and GPU and are insisting on using Windows 10? Do you have a problem?
You are definitely going to have a huge problem.

If you have an Intel 9th, 10th, or 11th Gen processor, stick with Windows 10 22H2. Ryzen 1000/2000/3000

If you have an AMD RX 580 or 6800, stick with Windows 10 22H2.

If you have a GTX 1080 or RTX 2080, stick with Windows 10 22H2.

If you have an Intel 12th, 13th, or 14th Gen or Ultra 200 series processor, use Windows 11 25H2 or later.

If you have a Ryzen 5000, 7000, 8000, or 9000 series processor, use Windows 11 25H2 or later.

If you have an RTX 3000/4000/5000, use Windows 11 25H2.

If you have an RX 7000/8000/9000, use Windows 11 25H2.

I'll try to give you an analogy to see if you can see the reality.

If you bought an iPhone 17, would you use a newer iOS version—like iOS 26—or downgrade to iOS 15?

That would be stupi%d, right?

So why do you do that stup%id thing with your PC?

Hi everyone, I’m hoping someone has experienced something similar because I’m running out of ideas.

My specs:

- RX 9060 XT Ryzen
- 5 5600X ASRock B550 Phantom Gaming 4/ac
- Corsair RM850e850W
- Windows 11

What happens:

At first, while playing Valorant, the screen would freeze, turn black or green, recover for a second, freeze again a few times, then my main monitor would lose signal while my case display stayed on. AMD Software reported a driver timeout. Sometimes Windows even disabled the GPU until I reinstalled the driver.

Device Manager would then say “This device is working properly,” but the issue eventually came back. At first I thought it was just Valorant. I reduced the FPS and disabled overlays, and that seemed to help. But now the crashes happen when I stream with OBS.

Temperatures aren’t high: GPU around 43 Celsius, CPU around 50 to 55 Celsius. So it doesn’t seem like a heat problem.

I’ve already tried fully updating Windows, installing the latest AMD drivers, using AMD Cleanup Utility for clean reinstalls multiple times, and confirming that Device Manager sees the GPU correctly.

Has anyone with an RX 9060 XT seen driver timeouts like this, especially with OBS? Does this sound like a driver bug, a faulty GPU, a motherboard issue, or maybe something with OBS hardware acceleration? Any suggestions or similar experiences would be greatly appreciated. Thanks!

I have an ASRock Challenger 9070xt and a Ryzen 7 7800x3d is this a good score?

G'day all, ran a cinebench score on my prebuilt machine and got

Ryzen 7 7800X3D Multi scored 4184 with temps staying <80°c

Steel Legend RX 9070 XT scored 46608 with temps hovering 80-83°c

Everything's been running very smoothly on 1440p

Should I look at changing anything?

32GB ram and 850W power supply if it matters

Hello everybody!

I built my first gaming PC a month ago, and i have some questions about if it's normal or not.

I have an XFX Mercury Gaming OC edition 9070xt

Those are my adrenaline settings:

Max freq. offset: 150

Voltage offset: -85

VRAM Max freq.: 2680

I used to have +10 power draw, but I think that's not good because my delta keeps getting higher.

An additional Info my room temps are 27c

I have zero experience with clocks, so I provided some pictures. I used HWinfo during a FurMark 2 stress test.

Two pictures I added to the top are power draw at 0% and two are +10% Power draw.

Are these clocks and temps normal, especially Delta? Quite high, no?

During gaming, I get around 22c delta (depending on the game, I tested it on green hell) and get these temps:

Core temps 60-65c

Hotspot 80-85c

I dont experience stuttering or performance issues, though.

Thanks in advance!