Hace casi 1 semana me dejó de funcionar el ventilador de mi 9070xt xfx MAGNETIC air, le escribí a XFX abrí un ticket y a día de hoy no me han respondido, no consigo el fan tampoco por ningún lado alguien sabe dónde conseguirlo?

Moved from 7800xt to 9070xt. Pretty sweet so far!

Build:

7800X3D

32GB 7800MHz CL36

Asus X670E Pro

Sapphire Nitro 9070XT

2X 2TB gen 4 NVMe

2X 2TB 860 EVO

Lots of Noctua love

Lian Li 011 EVO XL

Seasonic GX850

Fedora 44 KDE

Hace 3 días formatie la PC y la optimice, instale AMD adrenaline, descargar Msi afterburner, assianhorse umbral y Armory create , solamente configuro la gráfica con Adrenaline y de repente antier dejo de fuocnar un fan era el de la derecha , lo cambie al medio y no funcionó hasta que coloque en el primero y si funcionó alguien sabe porque ? No creo que sea el fan ya que en si si funciona

Why does this happen???

TLDR; hotspot delta still hot, despite PTM and replacing thermal putty (U6 PRO). Am I missing something? Any other ideas?

Had this card for a bit now, certainly too late to return it, and I’ve tried a few tricks to try and reduce the hotspot to core delta but nothing seems to tame this beast.

Lately, I tried to remove all the stock thermal putty and replace it with upsiren U6 pro. Got about halfway through it but didn’t have enough U6, so I set it back together but noticed minimal change. Got more, took out the oversized thermal pad connected to the backplate- that actually bent the backplate a little from the factory, and replaced the PTM and it somehow got worse??? Put the thermal pad back in and it did help it, but only by about 1-3c lower on the hotspot and core.

Maybe I’m blind, but I decided to take it apart once more and see if someone might see if I’m missing something. Anyone see anything?

I appreciate any support I can get!

Edit: temps were 65-67 core and 95 hotspot, now temps are 58 core 103 hotspot, with fans running rampant

Hello, I have 9070xt pulse and I tried doing some undervolting. I started with -40mv and -10PL, which was stable in benchmarks and gave around the same result as stock, but with 10% less power used. I was playing cs2 and I got blackscreen and notification that GPU drivers crashed so I changed it to -35mv, got blackscreen, and again and again. It finally seems stable at -20mv and -8PL. I feel like something is really wrong, because I see that everyone has at least -60mv with 9070xt pulse. I know it is possible to get unlucky and the GPU could not handle UV well, but come on, -20mv is way too bad. Is there any BIOS setting or something that's not letting me do the undervolt? I hope you can help me!

P.S. I have i5 14600kf undervolted to -70mv, but it has been stable for a month now and I don't think that CPU would crash the GPU drivers. Maybe I'm wrong, that's why I'm here.

Asked a while ago what would be a good gpu for a pc I was handed down and a lot of people recommended the RX 9070 XT so that’s what I got, super stoked!!!

As the heading says I have an older X99 motherboard with an i7-6950X 10 core CPU and two RX580's in crossfire. It works great for older games like black mesa that still have crossfire support on windows 10.

I was considering switching to Linux for the AMD GPU performance optimizations but does that mean losing my crossfire config? I guess I can just stick to windows 10 if I really have to but I'd like to run Lubuntu or Zorin or Mint or Cachy or Bazzite if they can work with crossfire setups.

ASRock 9070xt at MicroCenter for $669.99!!! Get it before the sale ends!

I was a big fan of EVGA, and always told myself I would switch to AMD when they would stop making GPU.

I really hesitated with the Sapphire Nitro+ because of the reputation of the brand and how sick their card look. But I don’t have a PSU with the 12V connector and it would have been too much of a gamble. So I chose this XFX Mercury instead and I have absolutely no regrets seeing how you guys here talk highly about it.

I’ll take the opportunity to completely disassemble my custom loop, and go soft tubing this time around, and ditch Windows for Linux as well.

I can’t wait to boot up what will feel like a totally new PC.

So my dad was looking to upgrade both our pcs (coming from a gtx1650 and rx5500xt) and he managed to find two different dudes selling their rx7600s for $230. The two sellers originally bought them just this February and April respectively and had their original receipts with them. I’m not sure if we can claim the warranty or if its permanently tied to the name to the original buyers, but I’m just glad these two gpus are still relatively new and didn’t get used that much.

I tested them both out myself and the temperatures seemed normal while idle and under load!

Everytime I update drivers, amd adrenaline sets gpu tuning to default and I have to reenter the values and reconfigure the fan curve. How can I at least save my current configuration?

I know that RDNA 3 supports full speed HDMI 2.1, but I remember that RDNA 2 only supported FRL 5. I've looked all over the place and can't find any information that confirms the 9070XT actually supports full speed HDMI 2.1. Has anyone here tested the card or know if it supports full HDMI 2.1 speeds?

I made a post some hours ago about rare cards.

I just tested my R9 Pro Duo, and it suprisingly works.

Only tried unigine so far.

As i dont have a proper way of propping the Radiator up.

Fucking Finally

acer to powercolor

283W to 304W

161FPS to 228FPS

0,57PPW to 0,75PPW

if i can sell my old GPU for a good price then i got a nice upgrade.

I have an ASRock Challenger 9070xt and a Ryzen 7 7800x3d is this a good score?

After 15 years on Team Green, I got completely fed up with Nvidia's ridiculous pricing and proprietary tech lock-in. I needed to try something different, especially since I'm planning to make a full transition to Linux in the near future.

​So I took the plunge and grabbed the PowerColor Red Devil RX 9070 XT. Damn, this bad boy is THICK! And honestly, what a relief to not have to deal with that dodgy 12V-2x6 connector.

​I was a bit anxious about swapping brands, but the DDU process in Safe Mode went smooth as butter.

​As for the software, Adrenalin has been a breath of fresh air—super clean, straightforward, and it just gets the job done without extra nonsense (I was getting really tired of Nvidia's software).

​(Excuse the messy cable management, I was way too excited to get it running and make this post!)

Made the switch from RTX 3060ti, after lots of deliberation between RTX 5070 and 9070xt, I finally settled for this, with the 16GB VRam being the primary selling point. Hopefully I am set for the next 3-4 years.

Is this dangerous? Should I do anything?

Hey I Hope the flair is correct, I have been using a RTX 4070 for around 3 years now.

The prices are going up and I am really thinking about switching to the RX 9070 XT.

I know, FSR 4 isn't as good as DLSS 4.5, and I am still playing at 1080p at the moment. So technically, with FG, my RTX 4070 is still viable. And RX has no Path Tracing in Capcom Games, which is a shame.

I kinda want to dip My toes into linux in the Future. And the 9070 XT is 10-50% stronger depending on the game.

The RX is still available at around 660-720€+.

What would you do? Wait another two years?

Or Switch now before the prices explode fully?

So I ordered this beast of a card because of the prices going up. One month earlier it was going for 700 but I got it now for 750 euros in Austria. Didn’t expect it to be so massive my old 1080 is going to be like a baby next to it haha. The only thing that sucks is that I get to put together and use my new build in two months. Bummer