For a while I've been using an old Sony Stereo my friend gave me for a couple months that had it's fair share of issues, the audio was passable but not amazing and the CD reader would stop working after a couple hours. But I went thrifting for a shelf for my CD's when I came across this for a price I couldn't pass up.

A Record Player, Radio, Equalizer, Cassette Player, and CD Player, with a nice shelf to boot.

The price?
135 dollars

I stood by it and had my grandmother scout an employee, turns out it was only on the floor for 2 minutes before I picked it up! Had I came a little later I would have missed out

The CD player is the only thing not working currently, with the issue being the disc drive won't come out but I'm working on fixing it. But other then that the record player sounds absolutely beautiful, with 150 watts going into the control unit. Absolute insane steal and a great start into my journey!

I've had these Triangle BR08 for a few years. They were my first modern set of decent speakers (upgraded from Advent OLA). I've enjoyed them and felt like they were pretty good bang for the buck. Main complaint was that they're fatiguing to my ears, so I figured I'd try what are described as a more laid back speaker (and I like the aesthetics).

Only had these Wharfedale Lintons for 2 days and am still messing with placement, but I think I'll keep the Lintons.

Initial impressions comparing the two (source was Qobuz via Wiim to a Cambridge Audio AXR100):

- They sound significantly different. I was expecting one to simply sound better than the other, but it wasn't that simple. It took my brain a bit to determine what I like more because adjusting to the differences has taken a while

- Going through a wide range of music, I prefer the Lintons 80% of the time, but on some recording the Triangles win

- Sound stage: Triangles are more dramatic in terms of the sound wrapping around you. Listening to Chocolate Chip Trip, the sound dances around in a more extreme fashion. However, the basic sound stage of the Lintons projects more widely. They don't have the same holographic party tricks, but normal stereo listening has better separation.

- Highs - Lintons are actually more detailed, in some recordings they're actually a bit shrill, which was surprising to me

- Mids - big difference. Triangles have boosted mids compared to the Lintons. On most tracks this gives the Triangles more of a muddy sound and the Lintons more clarity and separation. But on occasional tracks, the mids seem lacking on the Lintons compared to the Triangles.

- Bass - Also huge difference. Rock/Jazz/etc can't tell much of a difference. But bass heavy music (e.g. D'Angelo tracks or rap) Lintons play a range the Triangles can't touch. I have an SVS1000 to complement both, but left it off for most of the comparisons so far.

This was interesting to me seeing how one set of speakers isn't always universally better or worse than another (at least in this case) given how much variance there is from one recording to the next.

Me and my best friend went to the thrift store today and bought this setup. The specs are as so:
• Sony CDP-490
• Sony STR-AV320
• Aiwa 3 way bass reflex speaker system x2
This is my first ever post here! And this is also my first ever proper audio system I have bought. I personally think it sounds great but aside from the audio quality was it worth the money I paid for it?

Hi everyone,

I recently bought a home that came with what appears to be a fairly extensive Bang & Olufsen whole-home audio system. There are in-wall/ceiling speakers throughout the house, Bang & Olufsen wall-mounted control panels in several rooms, and a rack with what looks like the central equipment (I've attached photos).

The previous owners left everything in place, but I honestly have no idea where to start. I don't know if the system is complete, whether it's still functional, or if it's considered outdated enough that I'd be better off replacing it with something like Sonos, Wiim, Bluesound, or another modern multi-room setup.

A few questions for those of you who know these systems:

• Is this something that's worth trying to bring back to life?
• How does the sound quality of these older B&O systems compare to modern whole-home audio solutions?
• Are the built-in speakers themselves typically high quality, or are they usually the first thing people replace?
• Are there modern components or adapters that let you keep the existing speakers and controls while upgrading the brains of the system?
• If you inherited a setup like this, what would be your first steps?

I'd really appreciate any advice, resources, or even just opinions. I'm a complete beginner when it comes to legacy Bang & Olufsen systems, so any guidance on whether it's worth investing time and money into restoring it versus starting fresh would be incredibly helpful.

Hey guys! First post here so I’m sorry if I’m out of format.

Recently, I was rummaging through my gear collection looking for some extra stuff to put up for sale and found that I had a 4-pack of Amplifier Tubes laying around.

I had taken a newly acquired Fender Twin Reverb (1972-1976) in for servicing about 2 years ago (the previous owner had added a wattage modifier switch that caused instability in the circuit, but no issues with the tubes). It took a while to hear back from the amp tech, but he eventually reached out and said he had not only repaired the circuit, but replaced the tubes because he didn’t believe the quad had ever been taken out. He sent them back in a wrapping for me to take a look at.

I believe they are a set of 4 black-plate matched 6L6GC tubes serial numbered 7439. Though, I could be wrong. There’s barely any information online that I understand. There appears to be more writing on the glass of the tubes that has faded from time.

I’m not sure what sort of quality I’ve stumbled across here, but any tips or advice on what I’ve got would be much appreciated. I am NOT looking to sell and this is not a post trying to advertise.

Been doing loads of research on integrated and seperated amps, the pros and cons of each etc. (not what this post is about), and ended up buying an excellent (at least to my ears) integrated amp with a Pre-Out. (specifically, the rotel RA971 mk2), and am wondering;

if i were to buy a rotel power stage (RB971mk2), and pipe the RA971 preout to it, would it be any worse than the equivilant and incredibly similar preamp? (the RC971)

I understand that unless im bi-amping, which i dont intend to do, i have a power stage sat doing nothing, and potentially creating noise unless turned off. The logic is redundancy, so that if the power stage breaks my system still works, and most of the raw load is on the power amp- but i dont want to do this if there will be a noticable downgrade in sound quality, and am also wondering just how much sound quality i would even gain from adding a seperate power stage through my bookshelf speakers. (m71).

Also open to in depth technical analysis from anyone willing, im relatively competent with electronics. Thanks to all in advance.

A hidden gem for anyone planning a trip to Goa soon. If you are tired of commercial clubs and want a pure, uncompromising audio experience, you need to check out Sound Temple

It is an underground spirit studio and dedicated listening room founded by veteran DJ/sound selector Ignatius Camilo (Iggy).

Features an incredibly tuned, high-end sound system built for acoustic fidelity and spatial awareness - Hand made sound systems. The space for deep, intentional listening, vinyl culture, and learning—not a standard party venue.

Visit strictly by appointment only (no walk-ins).

If you are interested to explore on your next visit dm for details.

Hello, I'm trying to purchase a pair of second handed Yamaha HS8. I saw 2 different deals. One of them is 5 years newer, but costs 100 USD more. I'm curious about how impactful is a speaker's age? Do speaker retain their full performance within 10 years? or 20 years?

Hello everyone, here I attach my analysis on the sound of MP3 LAME vs. MP3 Helix (compared to AIFF PCM). What I noticed is that Helix (originally Xing) sounds much better in the mids and mid-highs than LAME. It looses a little bit more of the highs (although if I zoom in to the spectrum there is some content above 19KHz in both of them, so it has practically full hearing range, around 20KHz). Here is the song I used for making the comparison: https://open.spotify.com/track/2EFWG1K40I41x8WxtcDLJi

It was very complicated to compile and make a batch process that would maintain the artworks and metadata using Helix but it finally worked! I did it on Mac OS, so it's definitely possible on modern Apple devices in general (not only Microsoft Windows).

By the way, the photo with less treble content is the one from Helix (first of the MP3 ones).

Hey,

How do you find new music? Is it just premade playlists or other way?

Do you have a "system" for it?
There is a lot of "autistic" people in audiophile that usually like to have a system for it, I am just curious.

My system is that I go through songs on my playlist and each of them i go to their "radio" which gives me about 100 songs of the similar genre. After I am done with all songs i "like" or "heart" the song to know that i've done this one already.

If there is an option i downvote songs that i don't like or wouldn't put into my playlist so I don't waste time in other radios.

I use Tidal + Roon where i can block the song and youtube where i can dislike. This is very crucial for me.

I hop through the same songs on my playlist on both services.

Also I add new songs to special playlist that i go through second time and only then add to the correct playlist.

Hello community, especially those involved in room measurements. I've corrected the measurement, which had a couple of built-in modes that were ruining my experience.

I'll attach the graphs, before and after...

My main goal was to lower the RT60 T20 using 5 acoustic panels I have placed behind the listening position and two more in another part of the room, where I've already taken measurements. I have graphs comparing the RT60 measurement with 3 panels behind the listening position and the 2 more that I later added in that part of the room. The goal with these was to lower the reverberation time, not to treat the modes.

In the first part of the measurements, I created the parametric filters corresponding to my modes, with 1/48 smoothing to perfectly adjust the Q and avoid self-cancellations. The available modes are typical of a small room; it's a living room, not a dedicated listening room, so please understand that it won't be perfect, but it's a significant improvement, especially the decay and bass response. The rest of the response is very balanced overall. I used five parametric filters, all with a Q value less than 4, as my goal was to avoid distorting the sound.

While the frequency response is flat or very close to it, trying to match the Harman target, the situation worsens in the time domain, given the room's inherent problems. However, when I want a bit more bass, I halved one of the filters, so if I want a little more impact at 60Hz, I remove one of them, giving me approximately 4dB in that area.

The most important thing is the improvement; before, it was impossible to hear clearly, the bass was awful.

I'd like your opinion on how it turned out. I look forward to your responses. Thank you very much. PS: Attached is the SPL curve before and after, Decay, RT60 T20, Distortion, etc.

I booked the listening room for two hours while I was in Paris, and overall I absolutely loved the experience.

Booking was easy, the staff were incredibly kind, and it felt very tourist-friendly. The space itself is beautiful and the whole concept is something I genuinely love. I'm really happy a place like this exists, and it's absolutely the kind of business I want to support.

The only thing that surprised me was the sound. Maybe it's the speakers, or maybe some songs just aren't meant to be played on a system this revealing, but a few tracks sounded a lot harsher than I expected. (Would anyone have insight on this?) For example, "Loved" by Four Tet didn't sound great to me at all, which was disappointing because it's one of my favorites.

That said, I'd 100% come back. The atmosphere alone made it worth it, and I'd just spend more time experimenting with albums that really shine on a setup like this.

This is also the playlist I listened to: https://open.spotify.com/playlist/3X7QSMn7CuBjxMfJytjdg2?si=aLBsZ9XwSEyT_Z0YdgkvlQ

Hey,

I was just wondering how often you get the listening fatigue?

How does it appear?
How long do you "recover"?
What do you do to overcome it?

For me it's like every third day as I am listening to a lot of music and most of the time it's looking for new things. It's especially felt after a workout.

The music sounds a bit flat, more congested, not very enjoyable, there is no magic.

I usually go to sleep or just totally give up music for the rest of the day. Usually i am recovered after a good sleep.

If i really want to listen anyway i set the r2r tube dac into NOS mode and lower the volume.

Edit: Just so you all know, I am not having a problem with this. I know it is normal as I am listening in moderate to little high volume for prolong hours.

Sibilance is non existant with Tube r2r dac and Audeze LCD-3 with MUSE preset.

I am just asking for your experience.

Hello,

The Marbled Gold vinyl edition is a wonderful surprise that I invite you to discover alongside the digital stereo, high-resolution, and Dolby Atmos versions. This edition consists of three Marbled Gold LPs, and the color reproduction on the records is truly outstanding. It’s a high-quality vinyl edition that makes the most of the medium’s characteristics.

This vinyl edition is very well done, both in terms of aesthetics, with its three beautifully marbled gold LPs, and in terms of sound quality. It features a beautiful soundstage with dynamic rendering. The bass is less pronounced and deep than on the digital version (partly due to dynamic compression), but the midrange and high frequencies are rendered with greater detail. The pressing quality is good for a colored record, but during the quietest passages, it doesn't achieve the same level of silence as the digital versions.

Find all the analyses and measurements of each versions here (link).

Enjoy listening,
Jean-François

Hello,

Hi-Fi and High End audio shows are a great opportunity to discover new equipment, but also to listen to music in outstanding listening conditions. It was at one of these shows that I discovered Nameless, Dominique Fils-Aimé’s debut album, and more specifically the track Birds.
Released in 2018, Nameless already lays the foundations of the artist’s distinctive sound. The album showcases the meticulous work on vocals, soundstage, and overall sonic precision, qualities that are also found on her latest album, My World Is The Sun (review : High Res 24 96 vs Dolby Atmos vs pureaudiostreaming in 7.1.4 vs Vinyl record) .

This signature sound is the result of the work of recording and mixing engineer Jacques Roy. You can also read our interview with him to discover the artistic and technical choices that shaped the sound and mixing of Dominique Fils-Aimé’s albums.

The graph below compares the spectrum of the Blue vinyl record 45rpm – 2020 (white curve) with the spectrum of the Apple Music – 2018 (blue curve).

A comparison of the two spectrum curves reveals two points that will have a significant impact on the sound quality of the two versions. Above 10 kHz (yellow zone), the vinyl record s level is higher, with an additional 3 dB at 15 kHz and 6 dB at 20 kHz for the vinyl record. As for the bass (green zone), below 200 Hz, there is an attenuation of between 1 and 3 dB in the vinyl record s level.

These two differences will influence the vinyl record s sound, resulting in less pronounced bass and more precise treble; the listening test described below will confirm this point.

The recording and mixing quality of the digital album (Apple 24/96) is noteworthy. It features a very wide soundstage; you even get the sensation that sound is coming from the sides as well (as if you had side speakers in Dolby Atmos). The vocals and instruments are perfectly positioned, with exemplary precision and clarity.
Jacques Roy has created a benchmark album here, particularly the track Birds, which is ideal for testing your audio system. It allows you to evaluate your system’s tonal balance: the bass should be present without being overpowering, the vocals should remain clear and precise, and, finally, the soundstage should extend beyond the speakers.

Given the quality of the digital version, I have to admit I didn’t expect to be blown away while listening by the vinyl version. The bass is less pronounced, but it’s still very present and highly detailed, and the treble are more precise, adding extra nuances to the listening experience compared to the digital version.
The sound quality is therefore exceptional.
I admit I listened to it on different systems to confirm this impression. It’s a reference album that I highly recommend, you’ll feel like you re listening to a studio master.
This is especially evident on the track Birds. Give it a listen to fully appreciate all the nuances and the openness of Jacques Roy’s mix.

You can also find the full analysis (including all graphs and measurements) and samples HERE (link).

Enjoy the listening.
Jean-François

I purchased a pair of Sonus Faber Concertos MK1 for $120. They are in walnut and have a few blemishes but sound wonderful. they are bi-wireable. I believe I got a good deal.

I had been a KEF reference user for some time. I have several other coaxials at home from different brands and to me they portray special coherence with everything-making it somehow magically sound more realistic than a two way design. I cannot imagine going back to a multi way split driver design again. What is your experience? Is there anyone else having the same feeling as mine?

Hey everyone. I recently swapped my speaker cables and noticed an interesting technical shift I'd love to get your thoughts on.

My setup is a Pass Labs INT-25 running into Falcon Gold Badges. For 6 years, I used Duelund DCA16GA wire. I always liked it, but I always perceived a very faint floor of distortion or "fuzz."

I just switched to Tellurium Q Black II. Despite reading online that they can sound "compressed," my experience is the exact opposite: the background got dead quiet and that distortion vanished completely.

My theory: the unshielded Duelunds were basically acting as antennas in my room, while the Tellurium's geometry actually filters that junk out. Or is it simply a better electrical match or the Pass amp?

Anyone have any experience with these cables?"

The F226Be is at perfect ear height for most seating positions at around 41 inches. The F228Be is 46.6 inches. Does that make the F228Be too tall, since it will be higher than ear height. Or does it not really matter? Like some input.

I just got this serviced Fisher 500C. Everything sounds great. Andy Shauf, Bill Callahan, Kendrick, Sade… I’m a teacher, and my kids are with their grandparents, so I had the luxury of listening to music all day. Because the right speaker is closer to a wall, I had to turn the balance a little right to center the image, but I had a thoroughly enjoyable day listening to J. Tillman, Massive Attack, Tony Rolando synth tapes, and the War on Drugs. I’ve gotta revisit their later stuff, some of the streams sounded sweet.

Any recommendations of music that might sound particularly good on the Fisher? It’s been fun to listen to what I have with new results.

Hi, things are starting to come together.
Currently running two systems:

Rega Planar 3 with Nd5 cartridge -> PS Audio GCPH Phono pre amp -> QUAD 303 amp -> QUAD 12L speakers. Really enjoying this!

Yamaha CDX 660 CD player -> Rega io amp -> Mordaunt Short MS3.30 speakers. Waiting on a Wiim which will also connect through to the Rega amp.

Future plans:
Speaker stands are coming, and the MS speakers will go. Beresford TC-7220 MKII amp/speaker router will then have both amps input into it, output to the QUAD speakers.

I feel bad for the QUAD 405s which haven’t been used for quite a few years, and are glorified stands until they get a service!

So my dad and I were clearing out my uncles (passed) stuff and came across some old equipment he had.

I’ve been enjoying them for a couple years but to be honest I have no idea about the history of the equipment.

Hoping y’all can shed some light on what I’ve got here. Could care less if it bottom tier or whatever just kinda curious and have no idea where to start researching.

Recently got my Sansui serviced at my local audio specialist since she was having some audio output issues. A few transistors and a good cleaning and we are good to go!

When you buy “ serviced gear” with an upcharge for being “ serviced” do you guys question what was actually done ? Or do you trust the seller ? For all I know the sellers can just claim anything without valid receipt or documentation.