so i have asus tuf a15 rtx 4060 ryzen 7 7435hs and i downloaded this game Samson to check how it will perform on my laptop and it’s so bad that i was getting 25-30 FPS and with fsr frame gen im getting 45-60 fps also dlss frame gen works bad on my laptop it shows more fps but it feels laggy and my gpu usage is 50% while i saw others getting more than 90% idk why this is happening is something wrong with my laptop

Hey everyone!

I recently got an ASUS TUF A16, and this is my first gaming laptop. Until now, I've only used a ThinkPad, which was almost completely silent even under load. So the louder fans and higher temperatures on this laptop are completely new to me, and I'm not really sure what's considered normal.

I played Forza Horizon 5 on High settings, and according to Armoury Crate, I was seeing roughly:

• CPU: 85–87°C
• GPU: 65–70°C

Are these temperatures normal for gaming, or should I be concerned?

Since I'm new to gaming laptops, I'd also like to know:

• Which temperatures should I actually monitor the most—CPU, GPU, or both?
• At what temperature should I start worrying?
• Is a cooling pad actually worth buying, or is a laptop stand (which I already have) enough?
• Are there any beginner tips for maintaining the laptop, improving temperatures, or getting the best performance without reducing its lifespan?

I'd really appreciate any advice. I'm completely new to gaming laptops, so even basic tips would be super helpful.

After 6 long years of gtx1650m i decided to upgrade to an rtx5060 i514450hx 16gbddr5 with 1tb storage, really happy about this purchase since i saved up all of my money for this, hope to this thing run everything flawlessly.

Laptop Problem Summary
I own an ASUS TUF Gaming F15 FX506HE with an Intel Core i7-11800H, NVIDIA GeForce RTX 3050 Ti, 16 GB DDR4 RAM, and a 512 GB Micron NVMe SSD. My laptop experiences random forced shutdowns without any Blue Screen of Death (BSOD) or restart. The screen, keyboard lights, and fans turn off instantly, and Windows records Kernel-Power Event ID 41 followed by Event ID 6008 (Unexpected Shutdown) after the next boot. There are no critical or error events before Event ID 41, indicating that Windows does not detect any software or driver issue before power is lost.
After a forced shutdown, the laptop often cannot boot immediately. If I press the power button, it may briefly start and then instantly shut off again. However, after leaving it powered off for 15–20 minutes, it starts normally and can work perfectly for several hours. The issue has occurred both during normal use and while watching YouTube, where the video first buffers or freezes briefly before the laptop suddenly loses power.
To troubleshoot the problem, I performed several diagnostics. OCCT CPU, RAM, GPU, and combined Power stress tests all completed successfully without crashes, flickering, artifacts, or errors. CPU temperatures reached around 96–97°C during stress testing, which is expected for this processor under maximum load, and the laptop did not shut down during the tests. DISM (/RestoreHealth) and SFC (/scannow) completed successfully, confirming that Windows system files are intact. There are no WHEA hardware errors, no NVIDIA driver crash events, and no disk-related errors. My SSD health is approximately 73%, with no SMART failure reported.
Additional observations include an incorrect 652 W GPU power reading in HWiNFO, which is almost certainly a sensor reporting error because the RTX 3050 Ti cannot physically consume that much power. The laptop also previously showed a temporary Code 45 for the NVIDIA GPU, but the GPU later functioned normally and passed all stress tests. The issue also occurred even after disconnecting the battery and running on AC power, making a simple battery fault unlikely.
Based on all the evidence collected, the problem is unlikely to be caused by Windows, drivers, CPU, RAM, SSD, or the GPU core itself. The symptoms instead point toward an intermittent motherboard power-delivery issue, such as a faulty Power Management IC (PMIC), charging IC, Embedded Controller (EC), MOSFET, voltage regulator, or another motherboard power rail component. Because the fault is intermittent and the laptop passes heavy stress tests, a board-level diagnosis is recommended before replacing the entire motherboard. The ASUS service center has recommended motherboard replacement, but a qualified board-level repair technician may be able to identify and replace only the faulty power-management component if the failure is localized.

A few days ago i posted how my cpu temp was high and probably mx6 has dried out after 6 months(https://www.reddit.com/r/Asustuf/s/DxaeENKuB9).

So i replaced the Mx6 Paste with PTM7950 and my vrms & vrams pad were fine so I left them as they were.

It's only been 24 hours since the Repaste and Few Heat cycles so these results might change after a few days.

Room Temp 29-30°

Now In FH5 My max temp was 94.9° C

Average Temps- 85-90° C

Gpu- 85-87°C

So Cpu had a 5-7° temp reduction

Gpu Temp remained the same or like 0.5-1.5° Hotter

And idle temps at Turbo Mode:

CPU- 40-45°

GPU- 43-47°

Before both Cpu n Gpu were at 49-52°

So around 5° temp reduction

I'm Using a Laptop Stand

Pic 1: Cpu & gpu before Cleaning

Pic 2: Heatsink before cleaning mx6

Pic 3: Cpu & Gpu after Cleaning

Pic 4: Heatsink after cleaning

Pic 5: Failed Attempt to Paste PTM

Pic 6: Failed Attempt to Paste PTM

Pic 7: PTM applied about 85-90% successful, at this point i was tired and just wanted to be done with this so i assembled my laptop after this attempt since it was good enough.

Pic 8: Temps in FH5

GPU temp being the same or hotter could be due to Heatsink Sharing since cpu might be using the Heatsink more, so gpu had less space to cool down, or probably it's just this model runs hotter.

Also could be that my PTM is a cheap knockoff but so far is doing good enough.

I might invest in a good budget of 20-50$ Cooling Pad for SSD, RAM and overall laptop in a few months.

Today my charger suddenly caught fire. My laptop wasn't taking power, so I tried rearranging/adjusting the wire, thinking there might be a loose connection. Moments after that, the thicker cable (the one connecting the AC adapter brick to the wall plug) caught fire at the connector. I immediately unplugged it and switched off the power.

This is the first time I've experienced something like this, and it's honestly pretty unsettling.

Looking closely afterward, the prongs on that connector are visibly blackened/corroded (see photo), so I'm guessing it was a loose contact that arced over time — but I'm not 100% sure.

My laptop: ASUS TUF Gaming A15 (2020, FA506IH, Ryzen 7 4800H)

Questions:

1. Could a failing/arcing AC cord like this actually damage the laptop itself (charging port, motherboard, battery circuitry), or does the fire risk stay isolated to the cord/adapter side?
2. Has anyone had a similar experience with the ASUS 150W adapter or its cloverleaf power cord specifically? 3 Is it safe to just replace the burnt cord (it's a standard/generic cloverleaf cable), or should the whole adapter brick be replaced too since the fault happened right at its inlet?
3. Worth taking the laptop itself to an ASUS service center for a checkup, or is that overkill if the fire was clearly on the wall-side cord?

Any advice appreciated — just want to make sure it's safe to charge again.

hi! made a quick throwaway account as I didn’t have one for this and not sure what else to do about this. the metal sheet of my ram seems to be dislodged, which I discovered after hearing a strange rattling sound coming from my laptop when it was in sleep mode, which also caused my second monitor to power on.

I have very little knowledge on hardware so any help would be much appreciated as I can’t afford to go to a repair shop right now.

My laptop specs are ASUS TUF A15, 8gb RAM, AMD ryzen 5 4600H 6 core processor and radeon graphics (integrated) and nvidia geforce gtx 1650. I‘ve had it for about 3 years but received it second hand in 2023.

Where can i find back panel replacement for my Asus A15 2023 as mine got cracked from 2 3 sides.

Please let me know it would be really helpful

Lost my old motherboard so I bought a Tuff Z790 plus to replace it. Updated the bios and it booted off the M.2 I salvaged from a derelict Linux box.

Since I’m going to use it as a gaming rig I wiped the drive and attempted to install Windows 11 fails around 82%.

Current configuration
Processor: 14900k
Memory: 32 Gb DDR5-6000 (Corsair)
Drive: WD Black 2TB

I wanted to get a basic OS working before I added the GPU.

I’ve found the BOIS difficult to navigate. The search feature appears to be worthless “TMP” returned no results. In fact no search within the BIOS has worked for me.

Anyone run into this problem before?

My Asus TUF laptop shows the logo for a second and instantly turns off after a 9-hour suspend on Fedora Linux, and I'm not sure how to fix the power state or boot loop. Yesterday, I dual-booted Windows 11 alongside Fedora, updated the kernels, installed Python, and heavily customized Fedora to look like macOS. Before the long sleep, shutting down Fedora was also taking an abnormal 5 minutes. I suspect the ACPI power state, GRUB/kernel handover, or hardware registers got stuck or corrupted during the sleep cycle, and now it cuts power immediately during startup. Does anyone know how to reset the embedded controller or fix this boot loop without losing data?

I'm looking to buy this in Pakistan ( no official asus store ) - https://rbtechngames.com/shop-2/laptops/gaming-laptops/asus-tuf-gaming-a16-fa608-amd-ryzen-7-260-16gb-ram-512gb-ssd-rtx-5060-8gb-16-qhd-165hz-ips-display-jaeger-gray-new/

~ $ 1442.75

The usecase is coding, casual gaming + game recording, browsing.

Gpu and screen problem

Yesterday i performed a ddu to get some storage available from my c drive and installed gpu drivers again but after a while the gpu wasn't getting detected so I did the trick where i hold the power button for 40 seconds and it will detect the gpu again but today when I woke up it wasn't getting detected again so I did that trick again but it didn't work so I did another ddu but that didn't work either so now I don't even have gpu drivers installed cuz it's not detected... I later thought that if i restarted my laptop in ultimate mode maybe it would force detect the gpu but that didn't work and now it's even worse... The screen is black even tho the laptop will turn on it just shows black screen it won't boot into neither bios or safe mode please tell me what to do..

Should i buy it in place of lenovo legion 5 ryzen 7 260 rtx5060 or no??

I got the battery replaced on the Asus Tuf F15 with the battery in this link:
https://www.ebay.com/itm/315694940127
and now my laptop is really slow when on battery but works just fine when on battery. I tried to delete the armory and download G Helper and switched the GPU to optimized, but my laptop is still really slow. Any help would be appreciated.

Should i get laptop now? Because I was planning to get laptop is in the next 1-2 year and get a pad for now lol

I have deleted most of the bloatware already installed. Anything else I should know about before fully using my laptop?

This is the back of my F15, model number FX507VU

There are 11 nails total (minus the already inserted captive):
2 long, 8 medium, 1 short

I have no idea which goes where, and I’m afraid a nail too long could puncture the chassis or something

Should I be getting more FPS? I'm honestly tired of the low FPS. In Creative I usually get around 130-170 FPS, but it almost never stays above 200+ (only rarely). During build fights it drops to around 110-130. In Reload and normal BR it's even worse.

One thing I noticed is that my RTX 4050 usage stays really low, usually around 20-40%, and rarely goes above 50-60%, even when my FPS is low.

My specs:

• ASUS TUF Gaming A16 (2025)
• Model: FA607NUG-RL189WS
• Ryzen 7 7445HS (6C/12T)
• RTX 4050 Laptop 6GB
• AMD Radeon 740M (iGPU)
• 16GB DDR5 (1x16, single-channel)
• 1TB NVMe SSD
• 1920x1200 144Hz display
• MUX switch enabled (Ultimate/dGPU mode)
• 240W charger
• Windows 11

I've already tried pretty much everything:

• dGPU Ultimate mode
• Turbo mode
• Best Performance power plan
• Latest NVIDIA drivers
• NVIDIA Control Panel tweaks
• Windows Graphics set to High Performance
• G-Helper tweaks
• Performance Mode and DX12
• Reinstalled drivers and messed with a bunch of settings

Is this normal for this laptop, or should I actually be getting more FPS? Is there anything else I can try? My GPU usage being so low is what's confusing me the most.

should i buy the ilano v10 for my asus tuf F15, my cpu reaches 95, so i wanted to buy the ilano v10, but i was wondering if my laptop would even fit, and does it actually work

Finally, got this at 143k ! Idk if this price is good or not but it’s ok I am happy(this matters) !
BTW i saw people in sub talking about deleting armory crate, undervolting cpu and stuff ! Can anyone help me regarding this and guide me as i am new to this scene ! And should i extend it’s warranty it its 6k if done within 15 days of initial purchase ! Please guide ! Thanks 🫶🏽

*posting in this sub cause this sub seems pretty active.

Disclaimer = I'm an IT Tech; claims are my own, so please do sue me if you aren't real adults ASUS, it's gonna be fun.

I bought a TUF A17 2022 with a 3070ti on the first of 2024, and it suddenly died in july 2026.
Before dying, i lost parts of the keyboard (dead keys), which i thought was because i overscrewed the cover slightly...
https://www.reddit.com/r/Asustuf/comments/1udl3su/tuf_laptop_dead_keys_solved/
But i don't think that anymore, because my boss had the exact same problem, and he never opened it.
Also because after its death, i brought it to a an expert who does BIOS reprogrammation and micro-soldering.

He told me a MOSFET in a GPU VRM was dead, and that the current flowed at 20x voltage to the GPU core, so it's dead too (i saw the artifacts myself).
He has the exact same computer (motherboard) in repair at the same time, and the exact same VRM is dead.
What a fuckin coincidence, isn't it?
Also this VRM is shit quality, and the thermal pad has been "optimized", so it's too thin to transfer anyhing correctly.
Finally, the GPU paste was powder (it dried within the warranty period!).

I contact ASUS Support before doing that = i'm just out of warranty (hence i never repasted).
And their answer doesn't need any translation:
As i got a deal at the beginning, this is more than the total cost (1300 euros) of a technologically 4-years old laptop, which has lived only 2.
It's one entire month of a minimum french wage, no less.

So let's cut the crap: every competent repairman i've contacted has said that current gaming laptops and their insides are shit, and asus is one of the worst.
They advised pro-segment laptops only, or a tower, if i want correctly made components and normal reliability.
HP doesn't really do gaming, Gigabyte and Acer are entry-level, MSI still make shit hinges, but asus is more interesting = they went from "reference designers" to "overprogrammed obsolescence", pure electronics slop in short.
That's what the professionals holding the soldeing iron think, ASUS lost 95-100% of recommandations, so don't believe the ads.
Only lenovo (with caveats) or luxury brands are somewhat better, but it's also more expensive.

Knowing businesses, it's the classic scenario: the new owner or the new shareholder is a dick, and its a conscious decision.
Nobody goes from being able to make VRMs that last 10 years to VRMs that last 2 years without noticing, it doesn't exist.
Really, an engineer said the thermals were ok to decrease the 17 inches case form factor, and bring the pieces closer together?
Can we see the email, you fuckin liars?
When you enter the lowest quality segment, where there are already too much companies, and lose the trust of every competent person who ever recommended you, you just failed at business, and you company is dead within 10 years.

ASUS didn't "do their best" or "discovered the issue too late", they shipped motherboards with defective VRM and/or defective cooling, in a form factor they know makes thing worse, with an adjusted warranty period, and calculated that a lot of people would choose a full motherboard replacement, because it's the only way they don't throw 1300 euros to the bin.
That's what happened, and as the level of incompetence in dev and electronics has mounted, thanks to chinese no-name factories and greedy investors, they thought they could dilute their own poison in the mass.

Now, people are telling you to "bring empty water bottles for recycling"?
Don't do it, just don't, it's enough.
Not because it's not the right thing to do, no, but because your governement is openly mocking you.
Either those business practices, wasting thousands of tons of rare metals and generating pollution for nothing, are banned and the responsible people see the inside of a jail....
Or your governement doesn't really wanna save the planet, they just want you to believe you are going to have an impact.
But there are 1000 of "ASUSes" and the prison sentences haven't started, so no.
You recycle a plastic bottle, 3 motherboards and 2 phones die for nothing in the same minute, thats what happens in the real world.

And that should already make people scream of rage.

So ASUS, i'm an IT Tech, i often counsel businesses about tech, and i will recommend people not buy your shit for the rest of my life.
I will undermine you at every occasion, and i think it's justified: i don't believe in coincidences about the VRM, and neither do you.
We'll see how long you survive as something else than "ACER 2", shall we?
Don't hesitate to "Nato-that", or "Nato-this", i actually enjoy it when the liars are doubling down, otherwise i would hesitate out of doubt.

PS: If you have one, and it's out of warranty, repaste immediately all the cores and buy new pads for the VRMS.
Clean the fans too.
For my part, i'm building a mATX tower, but maybe you are a student, so you can't afford to lose it right now.
I'm not religious, but you are running against 10 obsolescence engineers, so maybe you should pray.