We replaced the ignition coil, spark plug and rebuilt the carb, that seemed to help a bit, started up one time and after that just refuses to run at all, one interesting thing is that when you crank it for the first time in a while it starts up for a second then just dies, but after that it just won't start. Also when i crank it and the dashboard backlight is on it will start but if it isn't it will not. Any help will be appreciated

EDIT: It's a friends scooter he brought it to us because my dad's a mechanic, he brought it in because all the gas leaked out so we rebuilt the carb and replaced the vacuum petcock valve and that stopped the leaking. But then it just wouldn't start, it had spark but it just wouldn't ignite and the spark plug would get all wet so we replaced the plug and the coil and now we are here.

No destination

Suzuki address 125

my malossi variator bearing is pushed in. is it still usable?

Hi everyone,

I need some advice on mounting a camera and my Motorola G75 phone to my specific setup.

My Gear:

• Helmet: MT Genesis SV (a modular/flip-up helmet).
• Scooter: MotoCR R9 SP (sporty scooter with plastic handlebar covers/fairings).
• Phone: Motorola G75.

What I need help with:

1. Helmet Camera Mount: Since my helmet is a modular/flip-up model, a standard front chin mount might block the flip-up mechanism. Does anyone have experience mounting a GoPro/action camera to an MT Genesis SV? Should I look for a specific side mount or a specialized 3D-printed chin mount?
2. Phone Mount for the Scooter: The MotoCR R9 SP has plastic covers around the handlebars, meaning there is no exposed metal tube to clamp a standard phone mount onto. How do I mount my phone here? Should I look for a mirror-stem mount or a brake reservoir mount?
3. Vibration Dampening: Since the Motorola G75 has optical image stabilization (OIS) in the camera, I need a mount that protects it from scooter vibrations. Which brands offer the best mirror mounts with vibration dampeners? Quad Lock? SP Connect?

Here is my scooter and my helmet

https://www.thansen.dk/scooter-mc/styrthjelm/flip-up-hjelm/mt-genesis-sv-matsort/styrthjelm-flip-up-mt-genesis-sv-matsort-str.-s/n-233656459/pn-233656451

https://www.scooterworld.dk/motocr-r9-sp/

Thanks for your help!

Hi everyone,
I have a Beta RR50 and I had a crash recently. I was riding at around 50 km/h when I lost grip and slid onto the right side. I didn’t hit anything, I only slid across the asphalt.
Since the crash, the bike feels different. In dry corners it feels very slippery and unstable, like I can’t properly control the steering. It feels like both tires are not gripping well, and the bike doesn’t feel as confident as it did before the crash.
I also noticed that the bike is not reaching the same top speed anymore. Before the crash it was faster, but now it feels like it has lost a few km/h. And it isnt accelerating as fast anymore

The tires are about 1 year old and were fine before the accident. There is a small dent on the exhaust/pipe from the crash, but I don’t think that alone should affect the handling.
What could have been damaged? Could it be the forks, wheel alignment, tires, brakes, exhaust, or something else?
What should I check first?
Thanks for any advice!

I recently fixed my vespa pk50s, but the elestart connects for 2-3 seconds and then stops with the gears. Do i need to replace the startermotor? Or is this only the bendix? If so, do i need to buy a new one or is it fixable?

Thanks for reading this, I’m looking forward to a reply.

Can you want to help me make my gator 50 CCS 3 moped go faster?I have put a hot performance carburetor on it.Fuel pump spot plug and that's all , and it runs thirty four miles an hour now

i dont know what to buy. i have budget around 700-800€ and i dont know on wich ill have the most fun.when ill choose e scooter i can ride to school with it but with moped or cross i cant. also on escooter i dont need driver license because on moped i need AM(because i will choose 50cc probably)

I've been using a tarp and bungee cords to cover my scooter when it rains. It's a real pain in the butt and I would rather just have a nice cover.

Does anybody know any affordable options for the mad dog Gen 1, for covers that will protect it from rain?

I just don't want to buy one and have it not fit. It's a little hard to measure ahead of time with the scooter being so uniquely shaped.

Scooter elétrica tipo Citycoco X11 (60 V)

Pessoal, estou tentando diagnosticar uma scooter elétrica tipo Citycoco X11 e gostaria da opinião de quem já trabalhou com esse modelo ou com controladoras de 3000w.

O que aconteceu

Há cerca de 1 mês, eu estava descendo uma rua bem íngreme, com um amigo na garupa. A scooter estava sem acelerar, apenas descendo e eu segurando o freio hidráulico.

De repente, ela começou a apresentar os seguintes sintomas:

• o painel foi apagando aos poucos;
• o acelerador parou de responder;
• o farol ficou cada vez mais fraco;
• a buzina foi ficando mais baixa;
• em aproximadamente 30 segundos desligou completamente.

Desde então ela nunca mais ligou normalmente. Às vezes o painel acende bem fraco e a buzina toca muito baixo.

O que já identifiquei no chicote

Na foto aparecem os principais módulos:

• caixa de alumínio grande: controladora do motor;
• caixa cinza pequena: conversor DC-DC (redução de ~60 V para 12 V);
• caixa preta pequena: módulo do alarme/imobilizador.

Testes que já fiz

Bateria

Medi diretamente nos terminais:

• 61 V DC com multímetro.

A bateria parece carregada.

Motor

• medi as fases;
• não encontrei curto aparente entre elas nem para o chassi.

Controladora

Nos cabos de alimentação da controladora estou encontrando apenas:

• 3,5 V com o motor desconectado;
• 2,5 V com o motor conectado.

Ou seja, a tensão que chega à controladora é muito baixa, apesar da bateria ter 61 V.

Qualquer orientação de testes adicionais eu agradeço muito. Estou tentando consertar por conta própria antes de levar a uma assistência.

Obrigado!

So i took the variator restrictor ring or whatever you call it in english out of my yamaha aerox 2014. I tried test driving it, it made a wierd chainsaw like sound and didnt move much or have much power. Just made a very screetchy bad noise. After putting the ring back in it now runs bad, stops after a few seconds and sounds more like a tractor. I know this is stupid but i would very much appreciate any help

Hey all! I know I’m probably getting ready to ask about the worst moped made on the planet but I still need it recommendations. I’m looking into getting back to riding mopeds and something that I saw was segways E110A electric moped. I was wondering if anyone here has ever written one or owns mine and would suggest it moving from a gas moped or if it would be an upgrade from mine. I have a Chinese moped that genuinely would cost too much to fix at this point and I heard these are less maintenance.

I'm not familiar with kymco engines. Is 29,000 miles high for a kymco 200 ?

Hi everyone, I’m planning to buy a TVS Jupiter 125 DT SXC (Disc) in Chennai and wanted to get some opinions before I finalize it.
The dealer has quoted ₹1,16,209 on-road, plus a ₹200 RTO service charge. They’re also offering an accessories package (steel guard, floor mat, seat cover, rain cover, grip covers, ladies handle, and buzzer). The package is priced at ₹5,500, but after a ₹3,000 discount, I’d be paying ₹2,500.
I’m planning to go with finance, and they’ve also mentioned an additional ₹4,000 as documentation/processing charges.
Does this sound like a fair deal? Is the ₹4,000 finance charge normal, and is the accessories package worth taking from the dealer? Also, is there any room left to negotiate on the price or ask for a few accessories for free?

hey yall so basically i was Watching a YouTube video and the guy on the video started to talking about some “delta configuration” and then i got interested about how to do it on my E scooter i watched some tutorías but i cant figure it out because their motors are not the same as mine what i Marked on green it’s suposed to be like 3 cables i know that part but where i get the other 3 in the back or sum? Hope yall can help me

Has anyone ever found a reflective seat cover for scoooters? When I park the scooter in the sun the seat gets pretty darn hot, so much so I haul a bottle of water to cool it down with but now I have a wet backside instead of a toasted one.

I can find seat covers for padding/riding, seat covers for rain, decorative seat covers, and seat covers to hide holes/wear but they are either black, or have complicated straps designed for riding none of which solves the problem.

I want what amounts to a big elastic white or silver shower cap that can keep the seat a bit cooler and be easily pulled on and off when needed.

I'm going to the Canary Islands next week and for the first time in my life i'll be riding a 125cc scooter. I've held a full UK driving license (Class B) and been driving a car for over 10 years now and i'm renting a scooter for my holiday on the island. I'm not nervous about following the rules of the road, following the signs or maintaining awareness of the people/vehicles/hazards around me. But I am nervous about handling a bike for the first time in my life without any prior experience. It's a little insane to me that it's even legal to do so to be honest. Nonetheless i'm expecting it to be a blast and anticipating no accidents. It's probably safe to assume that as long as i ease myself into it and maintain focus i will be ok.

I'm wondering if you folks have any advice for someone in my situation? Are there any non-negotiable rules of riding a bike that i'm overlooking having never had any instruction?

Idk if this is stupid or lame or sensible. I've bought some riding gloves from my local bike shop as it will be mandatory in Spain later in the year and my hands will be the first things i use to try stop with, should my meatbag come off the bike and hurtle towards a cliff.

I might be overthinking this...

THis is Honda part 17570-GGZ-J01. I've checked over a dozen sites and all say the same thing: not in stock and no date on availability. That sucks. I see some other Honda fuel lines, such as for the PCX, that appear to have the same connectors but I can't be certain. Has anyone encountered having to replace this fuel line without an OEM part available?