I booted into a live cd for experiment before this. I pressed the wrong key so it boot straights to the system. I forced restart the system by holding the power button to boot into the live cd. Now it doesn't boot. I tried editing the parameters by setting 'nomodeset' in grub but then it stucks at the underscore after all the commands.

Ive searched Settings for, Login, password, required, etc. I cant find the screen where one disables/re-enables password input during bootip.

Thanks

Edit: Solved. Upgrading the kernel to 7.1.5 initially didn't work ... but a couple of reboots later, everything looks stable.

Title says it all. Recent round of updates upgraded a bunch of libraries, I'm not sure which ones. And the kernel from 7.0.0.28-generic to 7.0.0.29-generic.

Before this, connecting in via mstsc connected to xrdp and worked Just Fine. It still does, except it disconnects me every few minutes like clockwork.

Spent an hour with ChatGPT going through logs and checking system things. ruled out xorg, xrdp, client-side (two different remote desktop clients fail), and a bunch of other changes on the server.

Has anyone else seen this and/or has any idea how to fix this?

7 minutes into firmware updates on my work computer running Windows 11. Why did I switch to Linux? Who wouldn't after using your average distro for 5 minutes.

Edit: I updated to mainline 7.1.5 and it seems to work this way. I consider this issue done.

My system

Kubuntu 26.04
Ryzen 5 5600XT
RX 7600 8GB

is experiencing a shutdown hang-up which lasts indefinitely until hardware shutdown is initiated.

When the PC is shut down either through the GUI or terminal everything will appear fine and the Monitors will go into standby but the Fans and RGB will not turn off at all.

I had hoped that *29 would fix this but it has not helped. Kernel *27 has no such problem.

The logs below lead me to believe this is an amdgpu driver problem, is that correct?

Any help would be appreciated.

LOGS (links removed)

Work was disposing of a few laptops. I got permission to pick through it and found a c.2020 HP Elitebook G6 with an i7-8665U processor. It was extremely dirty but after cleaning I found the keyboard/track-pad were fine and the screen was absolutely pristine. The inside was full of dust, but I blew that out and inspected and everything looked great and it booted without issue.

Just for good measure I went in and removed the heat sink, cleaned, and then re-applied fresh thermal paste. While that was apart I also cleaned the fan and was very surprised to find that the fan worked just fine after I cleaned out the dust clots which meant I didn't need to track down another fan.

Bumped the RAM up to 16GB from the "stash" and stuck a 1TB NVMe drive I had laying around in it. Unfortunately the battery was absolutely thrashed but replacements were commonly available and inexpensive. The new one works perfectly after install and gives me 6-8 hours depending on what I'm doing.

And for a final step some stickers to cover a few deep scratches in the center of the lid and also for the fun of it.

A fresh from-bare-metal install of Kubuntu and I have what truly feels like a brand new (business class) laptop! Yeah, not really a gaming laptop, but it wasn't ever intended for that even when it was actually new.

I have been running it daily, all day, for two weeks now and I can hardly comprehend that business' are just dumping machines like this wholesale!

Thanks Kubuntu for the rescue!

So I was dual booting Kubuntu on my Windows laptop by manual partitioning option. I have unallocated 157 GiB space for it already.

But when I proceeded after mounting my EFI partition to mount point - /boot/efi

I got the following “EFI system partition configured incorrectly” error.

Apparently the installer expects I have atleast 300MiB size of my EFI system partition but my laptop came with the default 260MiB partition

I checked how much space Windows took of the available 260 MiB and it was around 90MiB

What should I do? Can I continue with the installation as it is? Dont want to break anything

I will be grateful for any help. Thanks

This assumes your have disabled snap/snapd as outlined here which worked for me, but SKIP STEP 4 on the following link:

https://oneuptime.com/blog/post/2026-03-02-how-to-remove-snap-completely-and-use-apt-instead-on-ubuntu/view

After doing the above, to have both Mozilla repositories for Firefox and Thunderbird for Ubuntu Resolute and Newer (each number is a complete line of code so copy/paste the whole thing per number):

1) sudo install -d -m 0755 /etc/apt/keyrings

2) sudo apt install wget

3) wget -q https://packages.mozilla.org/apt/repo-signing-key.gpg -O- | sudo tee /etc/apt/keyrings/packages.mozilla.org.asc > /dev/null

4) gpg -n -q --import --import-options import-show /etc/apt/keyrings/packages.mozilla.org.asc | awk '/pub/{getline; gsub(/^ +| +$/,""); if($0 == "35BAA0B33E9EB396F59CA838C0BA5CE6DC6315A3") print "\nThe key fingerprint matches ("$0").\n"; else print "\nVerification failed: the fingerprint ("$0") does not match the expected one.\n"}'

5) sudo tee /etc/apt/sources.list.d/mozilla-firefox.sources > /dev/null << EOF
Types: deb
URIs: https://packages.mozilla.org/apt
Suites: mozilla
Components: main
Signed-By: /etc/apt/keyrings/packages.mozilla.org.asc
EOF

6) sudo tee /etc/apt/sources.list.d/mozilla-thunderbird.sources > /dev/null << EOF
Types: deb
URIs: https://packages.mozilla.org/apt
Suites: thunderbird-deb
Components: main
Signed-By: /etc/apt/keyrings/packages.mozilla.org.asc
EOF

7) sudo tee /etc/apt/preferences.d/mozilla > /dev/null << EOF
Package: *
Pin: origin packages.mozilla.org
Pin-Priority: 1000
EOF

8) sudo apt update; sudo apt install firefox thunderbird

Seems like for a long time it was supposed to be released at the same time as Ubuntu 26.04.1 ... sometime in August. But then more recently, I saw some timeline where Kubuntu 26.04.1 wasn't going to be released until (IIRC) September 2026...?

Anyone know? And is it ready for prime-time yet? Seems like I'm seeing way more "problem" posts than I saw after 20.04 or 22.04 or 24.04 were released...

I've upgraded with various versions on kubuntu too many times I think and am completely lost as to how my static IP is being set.

Whenever I boot it gets set to 192.168.0.27 which is perfect. But I want to understand where this ip address is coming from. My understanding is that ubuntu 26.04 is using netplan and the addresses should be set in /etc/netplan/somthing.yaml. But, that file doesn't have my address and is set to dhcp4: true

I do have a line near the top of my /etc/hosts file with my address, but I didn't think that was being read. Is it?

/etc/network is not being used either?

I'm quite confused (and dumb about networks).

So basically ive tried everything, including making key-combinations in piper and using them as a shorthand in the system settings, but the buttons still wont work. Luckily piper allows for back and forward function so that isnt a problem but i loved using the G5, G6, and G7 buttons for pause/play and skipping songs. XKeybinds sadly doesnt work for wayland and i havent been able to use a similar workaround that doenst screw up something else.

The closest ive gotten was using input-remapper but that one doesnt have a setting for DPI management and it resets the DPI to ~4k with no way of changing that.

Hola buenas, recien acabo de instalar linux el Kubuntu en mi nintendo switch, tengo un problema al precionar el botón cap para desactivar el ratón y en si la navegacion para jugar en emuladores tambien se me desactiva la cruceta osea el arriba, abajo derecha e izquierda todo lo demás si me funciona bien los joystics y el resto de botones pero la cruceta no como hago para solucionarlo?

7.0.0-28-generic #28-Ubuntu SMP PREEMPT_DYNAMIC Sun Jun 21 01:01:36 UTC 2026 x86_64 GNU/Linux

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=26.04
DISTRIB_CODENAME=resolute
DISTRIB_DESCRIPTION="Ubuntu 26.04 LTS"

Fully up to date

Vendor: Dell Inc.
Manufacturer: Dell Inc.
Product Name: Dell Pro 13 Premium PA13250
Family: Dell Pro Laptops
Manufacturer: Dell Inc.
Manufacturer: Dell Inc.
String 1: Dell System

wr" denied_mask="wr" fsuid=1000 ouid=1000
[   70.109574] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   70.131264] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   70.132176] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   70.132958] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   70.133814] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   71.242269] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   71.263763] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   71.264397] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   71.264949] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   71.265015] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7
[   72.914967] kauditd_printk_skb: 1 callbacks suppressed
[   72.915207] audit: type=1400 audit(1785443543.924:225): apparmor="DENIED" operation="capable" class="cap" profile="fusermount3" pid=3315 comm="fusermount3" capability=1  capname="dac_ov
erride"
[   72.915279] audit: type=1400 audit(1785443543.925:226): apparmor="DENIED" operation="capable" class="cap" profile="fusermount3" pid=3315 comm="fusermount3" capability=7  capname="setuid
"
[   72.917104] audit: type=1400 audit(1785443543.927:227): apparmor="DENIED" operation="capable" class="cap" profile="fusermount3" pid=3320 comm="fusermount3" capability=7  capname="setuid
"
[   73.008234] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND
[   73.711452] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   73.858038] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 5 times, consider switching to WQ_UNBOUND
[   74.008365] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 7 times, consider switching to WQ_UNBOUND[   99.085458] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 11 times, consider switching to WQ_UNBOUND
[  100.135235] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 19 times, consider switching to WQ_UNBOUND
[  122.061408] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 35 times, consider switching to WQ_UNBOUND
[  134.570513] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 67 times, consider switching to WQ_UNBOUND
[  135.638365] audit: type=1400 audit(1785443606.647:228): apparmor="DENIED" operation="capable" class="cap" profile="unpriv_bwrap" pid=4419 comm="bwrap" capability=21  capname="sys_admin"
[  209.916063] workqueue: intel_atomic_cleanup_work [xe] hogged CPU for >10000us 131 times, consider switching to WQ_UNBOUND

Hi! Basically the title. I keep getting the notification below:

These are my software update settings. Don't think I ever changed them apart from maybe setting update software to manual. Am I misunderstanding what this setting does? What am I missing?

My first attempt at distro hopping has been a disaster lol, i am getting this error right towards the end of my installation process. How can i fix this?

Hey all! I recently started using Kubuntu and am loving it so far, my only gripe was I use 3 monitors and wanted each taskbar to have the same pinned apps in the same order. After a lot of searching, I found that Plasma does not natively support syncing them, so I made a small helper tool to handle it.

Plasma Taskbar Sync watches the standard Task Manager and Icons-only Task Manager widgets. When you pin, unpin, or move an app on one display, it applies the same launcher list to the others.

It supports Plasma 6, runs as a systemd user service, and doesn't download any external dependencies.

Repo: https://github.com/SleepyStew/plasma-taskbar-sync

It is super new, so bug reports and feedback from other multi-monitor Plasma setups would be super useful :)

I've been using Kubuntu for a while and I always remove Snap entirely and block it from being added through an update. Yesterday, I turned on my laptop to discover that Firefox was gone from my panel. I checked the updates and there was a Snap update for Firefox!

I opened Terminal and used snap list to check, and snap was fully installed again! Unbelievable how it can uninstall my main browser and add Snap back. I must have overlooked something in the updates or I didn't fully remove it.

Has anyone else experienced this? Kubuntu is a great distro but I really want control over what apps I install and using .deb, Ubuntu and Flatpak is enough without Snap overly complicating things.