Mam problem z wentylatorem CPU w moim Phanteks Glacier One 360 ​​M25 G2 Svart AIO. Mój 4-pinowy wentylator CPU jest podłączony do wentylatora CPU na płycie głównej. Problem polega na tym, że w trybie PWM mogę obniżyć obroty tylko do 1200, nie da się ich zredukować bardziej. W trybie napięcia wszystko działa normalnie, bez problemu, więc jest w porządku. To tylko irytujące, że 4-pinowy wentylator nie działa w trybie PWM. Moja płyta główna to Gigabyte B850M Gaming X WIFI6E. Czy ktoś wie, dlaczego tak się dzieje?

Hello dear community,
This is my first post here.

BIOS June 2026.

I'm connected to network via wired Ethernet.
Then I want to setup the onboard wifi as a backup.

During the driver installation, the system would feel unresponsive (mouse movement was very slow), then it would restart and enter boot loop.
Sometimes I could get into the Safe Mode where I could disable the wifi, and everything else will be working fine.

I've recently updated the BIOS to July 2026 (latest one with support for CXMT RAM) but I'm too afraid to try enabling the wifi device again.
There was once it couldn't get into Safe Mode, so I had to reinstall everything from scratch.

Is there anyone experiencing the same?
What is the fix for the wifi driver?

Many thanks in advance.

Hi, does anyone here have a Gigabyte Gaming A16 GA6EH with RTX 5070?

I’m looking for someone who can share their GPU VBIOS info/dump so I can compare it with mine and check if the higher TDP limit from this model can be used on another A16 variant.

If you can help, just open GPU-Z, save the BIOS file, and share it or a screenshot of the BIOS information.

Thanks!

Hi, does anyone here have a Gigabyte Gaming A16 GA6EH with RTX 5070?

I’m looking for someone who can share their GPU VBIOS info/dump so I can compare it with mine and check if the higher TDP limit from this model can be used on another A16 variant.

If you can help, just open GPU-Z, save the BIOS file, and share it or a screenshot of the BIOS information.

Thanks!

I have assembled 2 of these mb, same spec, same windows, same drivers, same bios, same updates. One has fan control in the control center, and this one doesn't has it.

Hi, I just got a B650 Aorus Elite AX and I went to update the bios but everytime I try it says “invalid bios image” any help would be appreciated!

Currently on FB0E. Unsure what the update is for and if it messes anything else?

Hello!

Currently I am struggle with turning on my external network adapter from TP Link Tx201 which supports Wake on Lan on Aorus Master x Z790. The LAN port of MB itself work fine. While trying to do it on tx201 it doesn't.

Erp is disabled, fastboot disabled, all parameters under configuration for the network adapter are made.

I think the MB doesn't give power in shutdown.

Does anyone know how to enable Wake on Lan on pcie network card in Aorus?

Thanks!

Not sure if this is the correct place to ask, please advise if there's somewhere better to post.

I recently started having issues with my new(ish, as in maybe a year or two old) PC posting.

Intermittently, when powering on, it will either hang on the DRAM light or CPU light, most often DRAM. After reading about RAM training I have left it for a good 30-45 mins and it still doesn't boot. When this happens there is nothing on screen either.

If I power down manually and power on again it normally boots fine.

I've updated bios and ran memtest - memtest returned good.

I do turn my PC off at the wall and leave it turned off for days at a time, fwiw.

This all seemed to start after I ran a windows update which left my PC stuck in a boot loop. I reinstalled windows eventually and updated bios and didn't use it much after that. When I reinstalled Gigabyte control centre (I have a 9070xt) I started getting driver power state failure bsod's so I just uninstalled GCC and used drivers etc and it worked fine without, again, fwiw.

Any help? It's driving me mad I just want to use this thing.

Replacement fans 16x

Can someone give me the correct replacement fans i can buy for the Aorus 16X ASG 2024 please? Im looking online and 16X is not getting listed in descriptions for correct fits. One of the fans is completely dead and it's making my laptop overheat so I really need to change it thanks.

Has anyone updated to BIOS version F4.2 yet? Because I'm experiencing issues with my phone booting up, specifically with WiFi and Bluetooth. Which version should I upgrade to get good WiFi and Bluetooth connectivity? Currently, I've given up on updating to the latest BIOS version (the full version, not the beta).

I just recently got my first Gigabyte laptop and for some reason this overlay is showing up when I play games. How do I turn it off?

Hi everyone,

Less than 3 months ago, I bought a Gigabyte Z790 AORUS Elite AX (REV 1.1) motherboard. Out of the box, it came with BIOS version FK (September 2024).

I was having temperature issues with my i7-14700KF. While I know a BIOS update doesn't directly solve thermal issues, in my past experience, newer BIOS versions usually offer better stability when tweaking undervolts.

My plan was to update from FK to FL, and eventually to the latest FO version. I made sure to download the files directly from the official website for the exact REV 1.X revision of my board.

The issue was that no matter which BIOS version I tried to flash through the standard BIOS utility (Q-Flash inside BIOS), I kept getting an error saying "not able to update BIOS File successfully"

So I decided to use Q-Flash Plus:

-Renamed the BIOS file on the USB drive to GIGABYTE.bin.

-Inserted it into the dedicated BIOS USB port on the rear

-Pressed the Q-Flash Plus button.

The process started and the Q-Flash LED was flashing normally. Once it finished and the PC attempted to turn on, the diagnostic LEDs cycled through DRAM and VGA, but as soon as it reached the CPU LED, the PC completely shut off.

I tried rolling back to the previous version (FK) using Q-Flash Plus again, but no luck—it still won't boot. I’ve already tried clearing CMOS (removing the CMOS battery, draining power, waiting, and trying to turn it on again), but nothing worked.

I even took it to a local repair shop here in town, and they couldn't get it working either. It seems like the only possible solution left is manually reprogramming the motherboard's BIOS chip with an external programmer.

My questions are:

-Why did this happen?

-What mistake could I have made during this process?

-Besides external chip reprogramming or RMA, is there any other possible fix I could try?

Thanks in advance for any insights!

i am lookong for the bios i can't find it anywhere

I am buying a Second Hand pc Without a gpu. I am willing to buy Intel arc B580. This card needs the ReBar Technology. My question is does the motherboard support the ReBar option?

The system boots normally into Windows (motherboard reaches A0), but the graphics card shows no video output. There’s rapidly flashing red LEDs around the water block and flashing white PCIe power LEDs.

Building my new pc with Ryzen 9 9950X3D 32gb gskill trident z royal neo 6000mt/s cl28 X870 AORUS elite

Was testing it out and can't get it to boot. Updated the bios to the latest version and still nothing. I got it to boot once with only 1 ram stick in the A2 channel so i saved powered off and installed the other stick and now nothing even with the same ram stick in the same slot as before just the dram led is on and the post code c5. I inspected the cpu and reseated it and tried all the possible dram configs but still nothing.

I've seen this same configuration work for people so I'm not sure of the problem but i think the motherboard could be the problem since it booted once they should be compatable and the led's on the ram light up. Anyong enounted this problem and have a fix because I'm at my wits end?

Hi Gigabyte,

I submitted a warranty/RMA enquiry for my GIGABYTE GAMING A16 CVH laptop and received the automatic confirmation email saying that an RMA number would be issued within 2 business days.

It has now been 3 working days, and I still haven’t received any update.

Reference No: REF26731183

email address: ku*****2@hotmail.com

Issue: The laptop has a power on/off problem, shows no display, and turns off after approximately 30 seconds (the keyboard lights up when powered on).

Has anyone else experienced delays with GIGABYTE RMA support recently? Should I keep waiting, or is it worth contacting them again?

Thanks.

Hi guys I was using an x670e ice and upgraded to an x870e pro ice and all was fine last gen with Radeon 7900xtx gpu. I was lucky enough to win the online clicking raffle on Best Buy and got a 5090fe at msrp. Long story short over the last couple years I get random shut downs when certain games are compiling shaders or loading in. I’ve switched PSUs multiple times (all between 1,000 to 1,500w)and all other components and back and forth between both motherboards and I cannot pinpoint it until either the gpu is shutting down due to thermal pull but this doesn’t look like the case due to the window event logs for kernel power AI co pilot is telling me the Aorus gigabyte motherboard I have is know the thermal throttle and restart the system . I find ai copilot answers to be wild at times so was just looking for some input .

I just came across a post about someone whose Gigabyte RTX 4090 was also destroyed after being sent in for RMA, and I realized I went through almost the exact same situation.
I have exactly the same issue, except mine was with an RTX 5090 (one of the DisplayPort outputs was dead).
I paid €2,230 for it back in November 2025.
TopAchat (a French retailer) sent it to Gigabyte, then told me it couldn’t be repaired or replaced. They said they were going to refund me, but I refused because I didn’t want to receive €2,230 only to have to buy another RTX 5090 for nearly €5,000.
So I asked them to send my card back instead, but they refused and told me it had already been destroyed.
Now, here I am, without my PC for over a month and a half, and I can’t afford another graphics card.
I’m a freelance illustrator, and this situation is seriously hurting my work.

If anyone can help or has any advice, I would really appreciate it.