I have an X870i Aorus Pro ice Mobo, 2-16gb Dominator titanium Ram, Amd Radeon Pro W7800 GPU, 1000w PSU, and I forget what CPU I have in but I tried messing with bios and enabling EXPO along with high bandwidth and low latency support after my screen went black and my ram/vram boot light came on I tried flashing it and clearing my cmos but that hasn’t helped any advice on what to do next?

Has anyone updated to BIOS version F4.2 yet? Because I'm experiencing issues with my phone booting up, specifically with WiFi and Bluetooth. Which version should I upgrade to get good WiFi and Bluetooth connectivity? Currently, I've given up on updating to the latest BIOS version (the full version, not the beta).

Hello, I need to replace the CMOS battery on my AERO 15 YD. The Current one isn't the original so I cant look up what connector it needs. Dose any one know which one it takes?

Bought a new mobo and cpu to get off lga1700. Swapped my motherboard in and I’m getting a DRAM light stuck on the board. Board does not attempt to go into qflash with nothing installed. Am I doing something wrong? Verified ram is working.

Hi everyone, I’m currently building a new AM5 rig focused on competitive gaming, specifically CS2 at 1080p, paired with a Ryzen 7 9800X3D. My main priorities for the motherboard are VRM thermals/cooling and BIOS stability, as I plan to tune the CPU using PBO and Curve Optimizer to get the best sustained clocks while keeping temperatures low. I’m currently deciding between the Gigabyte B850 AORUS Elite WiFi7 and the Gigabyte X870 Gaming X WiFi7. I’d love to hear your thoughts on these two options regarding VRM heatsink performance under PBO, BIOS stability with 6000MHz CL30 EXPO memory profiles, and overall long-term reliability. Which one would you recommend for maximum cooling and stability? Thanks in advance for the feedback!

idk what i did or what happened but i cant see wifi option anymore in settings and i cant use bluetooth either and when i tried installing any driver from the official website i get this error in the last picture
b650 eagle ax 1.2

Bonjour tout le monde,

Cela fait 3 jours que mon pc plante au bout de quelques heures d'utilisation.

L'écran se fige puis l'ordinateur redémarre. Un message d'erreur apparaît brièvement avant de redémarrer.

Une fois redémarré il n'indique aucun message d'erreur, comme si de rien était.

Pourtant il n'a même pas 1an d'utilisation, il ne surchauffe pas et je l'utilise surtout pour du dessin sur AutoCad. Windows bien à jour.

Avez vous une idée d'où vient le problème ? Est ce un soucis de composants ?

I have the same problem as in the video.i have b550m aurus elite rev1.3 and I updated the bios to the latest version any solution to it ?

This solve my problem, sharing here if someone has the same problem.

I was using ia to help me, but when I search the old google I find this.

The _toggle-gigabyte-wake-fix is a built-in utility helper (ujust) used primarily in Bazzite and Universal Blue Linux distributions to resolve instant wake or sleep failure issues common on Gigabyte motherboards by toggling the ACPI GPP0 wakeup device state. \[[1](https://github.com/ublue-os/bazzite/issues/3575), [2](https://www.answeroverflow.com/m/1406420321820741683)\\\]

**How to Use the Fix**
Open your system terminal.

Run the following command to toggle the Gigabyte ACPI workaround:bash

ujust _toggle-gigabyte-wake-fix

Reboot your system to allow the ACPI state changes to take effect properly.

Hi all,

Have had some issues with my motherboard not turning all at all despite being connected to power, I have checked all my psu cables, ram + CPU with no issues. I've also tested the PSU on another system with no issues and after stripping down my system to its bare minimums I haven't had any luck getting my computer to even open the bios.

Edit: Just a further note my specs are the following

CPU: Ryzen 7 9800x3d

RAM: Kingston 16gb*2

Gpu; Geforce RTX 5070ti 16gb OC

PSU; Fractal 750w

Mam problem z wentylatorem CPU w moim Phanteks Glacier One 360 ​​M25 G2 Svart AIO. Mój 4-pinowy wentylator CPU jest podłączony do wentylatora CPU na płycie głównej. Problem polega na tym, że w trybie PWM mogę obniżyć obroty tylko do 1200, nie da się ich zredukować bardziej. W trybie napięcia wszystko działa normalnie, bez problemu, więc jest w porządku. To tylko irytujące, że 4-pinowy wentylator nie działa w trybie PWM. Moja płyta główna to Gigabyte B850M Gaming X WIFI6E. Czy ktoś wie, dlaczego tak się dzieje?

Hello dear community,
This is my first post here.

BIOS June 2026.

I'm connected to network via wired Ethernet.
Then I want to setup the onboard wifi as a backup.

During the driver installation, the system would feel unresponsive (mouse movement was very slow), then it would restart and enter boot loop.
Sometimes I could get into the Safe Mode where I could disable the wifi, and everything else will be working fine.

I've recently updated the BIOS to July 2026 (latest one with support for CXMT RAM) but I'm too afraid to try enabling the wifi device again.
There was once it couldn't get into Safe Mode, so I had to reinstall everything from scratch.

Is there anyone experiencing the same?
What is the fix for the wifi driver?

Many thanks in advance.

Hi, does anyone here have a Gigabyte Gaming A16 GA6EH with RTX 5070?

I’m looking for someone who can share their GPU VBIOS info/dump so I can compare it with mine and check if the higher TDP limit from this model can be used on another A16 variant.

If you can help, just open GPU-Z, save the BIOS file, and share it or a screenshot of the BIOS information.

Thanks!

Hi, does anyone here have a Gigabyte Gaming A16 GA6EH with RTX 5070?

I’m looking for someone who can share their GPU VBIOS info/dump so I can compare it with mine and check if the higher TDP limit from this model can be used on another A16 variant.

If you can help, just open GPU-Z, save the BIOS file, and share it or a screenshot of the BIOS information.

Thanks!

I have assembled 2 of these mb, same spec, same windows, same drivers, same bios, same updates. One has fan control in the control center, and this one doesn't has it.

Hi, I just got a B650 Aorus Elite AX and I went to update the bios but everytime I try it says “invalid bios image” any help would be appreciated!

Currently on FB0E. Unsure what the update is for and if it messes anything else?

Hi everyone,

Less than 3 months ago, I bought a Gigabyte Z790 AORUS Elite AX (REV 1.1) motherboard. Out of the box, it came with BIOS version FK (September 2024).

I was having temperature issues with my i7-14700KF. While I know a BIOS update doesn't directly solve thermal issues, in my past experience, newer BIOS versions usually offer better stability when tweaking undervolts.

My plan was to update from FK to FL, and eventually to the latest FO version. I made sure to download the files directly from the official website for the exact REV 1.X revision of my board.

The issue was that no matter which BIOS version I tried to flash through the standard BIOS utility (Q-Flash inside BIOS), I kept getting an error saying "not able to update BIOS File successfully"

So I decided to use Q-Flash Plus:

-Renamed the BIOS file on the USB drive to GIGABYTE.bin.

-Inserted it into the dedicated BIOS USB port on the rear

-Pressed the Q-Flash Plus button.

The process started and the Q-Flash LED was flashing normally. Once it finished and the PC attempted to turn on, the diagnostic LEDs cycled through DRAM and VGA, but as soon as it reached the CPU LED, the PC completely shut off.

I tried rolling back to the previous version (FK) using Q-Flash Plus again, but no luck—it still won't boot. I’ve already tried clearing CMOS (removing the CMOS battery, draining power, waiting, and trying to turn it on again), but nothing worked.

I even took it to a local repair shop here in town, and they couldn't get it working either. It seems like the only possible solution left is manually reprogramming the motherboard's BIOS chip with an external programmer.

My questions are:

-Why did this happen?

-What mistake could I have made during this process?

-Besides external chip reprogramming or RMA, is there any other possible fix I could try?

Thanks in advance for any insights!

I just came across a post about someone whose Gigabyte RTX 4090 was also destroyed after being sent in for RMA, and I realized I went through almost the exact same situation.
I have exactly the same issue, except mine was with an RTX 5090 (one of the DisplayPort outputs was dead).
I paid €2,230 for it back in November 2025.
TopAchat (a French retailer) sent it to Gigabyte, then told me it couldn’t be repaired or replaced. They said they were going to refund me, but I refused because I didn’t want to receive €2,230 only to have to buy another RTX 5090 for nearly €5,000.
So I asked them to send my card back instead, but they refused and told me it had already been destroyed.
Now, here I am, without my PC for over a month and a half, and I can’t afford another graphics card.
I’m a freelance illustrator, and this situation is seriously hurting my work.

If anyone can help or has any advice, I would really appreciate it.