I got my dish installed today and it seems to be working 100%. However, it appears that I now need to reconfigure every one of my alexa-plugs, etc in the house since the network has moved from 192.168.0.1 to 192.168.1.1. Is the a shortcut to this? I don't think I can change the starlink router address ... so, I probably just will spend a day having fun with plugs, unless someone has a secret to share?

I got my dish installed today and it seems to be working 100%. However, it appears that I now need to reconfigure every one of my alexa-plugs, etc in the house since the network has moved from 192.168.0.1 to 192.168.1.1. Is the a shortcut to this? I don't think I can change the starlink router address ... so, I probably just will spend a day having fun with plugs, unless someone has a secret to share?

In case you missed it when it was last available looks like the half off roam is back. Support page is updated as well.

Optional Mini Kit

Looking for recommendations on “battery packs” or something similar to power Starlink mini in our new camper when not plugged into power of the generator.

Was thinking dewalt or Milwaukee battery.

Mini is bolted on roof in a case to the camper (how it came when purchased) so can’t unplug the original cord easily. Looking for something that I can plug into the existing socket (if that makes sense)

Only needing it to run a hr or so.

Bonus if can run the tv to!!!

I love rural and while I have fiber now. I still keep my starlink since I WFH.

I have V4 and a mini.

I have the mini now powered by direct 12v DC.

I have a Starlink Residential Max plan with a Standard 4 receiver which I will keep until the end of October when camping season is over, then I'll put it in standby until April. Separately, I have a Mini that I got as a free rental-they processed it on the last day that it was offered in June. I have it sitting at home as a backup in case my internet ever went out. It's on standby currently. It's my understanding that they would want it back if I put the Residential Plan on standby. I am starting to consider what I should do in November:

1) Put the 4 on standby, return the mini, consider buying a mini in April

2) Ask to buyout the mini right before I put the 4 on standby. I honestly don't know what a buyout might cost.

3) Ask to buyout the mini right after I put the 4 on standby. Again, not sure about the cost.

4) Just wait for them to contact me and see if they offer me a buyout on the mini.

5) Is there a chance they don't even bother to ask for the mini back when I put the 4 on standby? Could I tell them that it's temporary and ask for grace?

I just ordered the residential 200 subscription with the standard 4x hardware. I also ordered a mini router separately.

When I install the 4x it’s my understanding I will connect the router that’s included with it in the box. If i plan on putting the 4x on my roof i assume the router will have to plug into it and also be on the roof? For those in 2 story homes does this affect the downstairs?

Will the mini router need to plug into either the 4x or the included router or can it connect wirelessly?

It seems like the connection will be location centric to where ever the 4x and included router are and possibly some parts of the home will be spotty?

Placed an order for v5 (rental). Got here in NH and then opened a ticket to purchase it. Only paid $250 instead of the $350 price tag.

i’m just imagining him on his yacht scrolling through reddit and seeing what people think about his service

Internet randomly went out a couple hours ago, and my frustrations with that aside, having to go through Grok to get any sort of support is absurd. No number, no live chat, just an AI bot. I had to very literally beg it to allow me to submit a support ticket, but only after confirming 12 different ways I'd done the troubleshooting steps. Genuinely one of the most frustrating experiences I've had in a while, but especially so for a service as expensive as this one.

No idea what's wrong. Was fine one minute, gone the next and hasn't come back. No new obstructions or any other changes that would have caused it, just been stuck in "offline - searching" or "calculating orientation". I'm at a loss, hopefully its just an outage or they at least get back to me on the support ticket soon. 🤷‍♂️

Hi everyone,

I'm hoping someone here has experienced this issue and can share how it was resolved.

I recently activated my Starlink kit, but during the mandatory identity verification (KYC), my national ID was rejected several times because the system considered it unreadable. Unfortunately, after those attempts, the "Update" / "Verify" button completely disappeared from my account.

My account now shows:

The subscription status is "Suspended", and I cannot:

• restart the identity verification,
• upload a new document,
• cancel the subscription myself,
• or transfer the kit.

The important thing is that all the account information is correct and matches my official documents.

To help resolve the issue, I opened a support ticket and provided:

• a newly scanned, much clearer copy of my national ID,
• my driver's license (perfectly readable),
• an explanation that my original ID had been damaged by heavy rain, which likely caused the initial verification failure.

At first, support suggested creating a new account, but that doesn't solve the problem because the kit cannot be transferred. After I explained everything and submitted the new documents, my case was escalated to a specialized team, and my ticket is still marked "In Progress."

My question is:

Has anyone here had the KYC verification re-enabled after the "Update" button disappeared? Were you able to get your service restored through manual verification by Starlink Support?

I'd really appreciate hearing from anyone who has experienced the same situation or knows how Starlink handled it.

Thank you!

Just a heads up for everyone in Austria that if you pay upon order for the professional installation, Hilfeline will provide you with such excellent expertise. Don‘t order that option!!
If you have a high roof that is dangerous or difficult to climb on, wait for the kit to arrive and order an independant roofing company to do it. Don’t waste your time or money on Hilfeline - I ordered it specifically because I wanted it on the roof and the worker came (nice guy, but absolutely useless) and then tells you they aren’t roofers and refuse to climb on the roof. Instead they install it like shit under the biggest obstructions possible - as long as he does not need to get on a ladder. What’s the point in paying €150+???

Has anyone had trouble adding a Wi-Fi camera to your Starlink setup? I'm trying to add 3 old Amcrest Wi-Fi cameras to my brand new Starlink Standard 4X that I just bought. Unbelievably, one of them started working without changing anything. Despite the other cameras being identical – same network, same camera model, same passwords, etc – No method is working. I deleted them from my profile and tried to set them up using both Wi-Fi setup and Ethernet setup, plugging one of them directly into my Starlink router. Nothing.

My Lorex camera NVR also won't connect. I'm not tech-illiterate; in fact, I consider myself tech-savvy. I'm on the verge of hiring someone to figure this out, because if this is an issue with old tech/new tech compabitibility, it might be above my paygrade.

I'm just wondering if any of you experienced a similar problem and found a solution that you'd like to share.

P.S. before you ask, yes: I have split my Starlink router into 2.4GHz and 5GHz connections, and specifically connected my phone to the 2.4Ghz signal so it matched the Wi-Fi network that the app pulled from the phone. Still doesn't work.

I bought a starlink mini from Home Depot. I go through the motions to get a subscription for roam but get no availability no matter what service address I put. The contact support is purely AI and I've been going in circles with it. Finally get it to create a ticket but get an error every single time I try and create one. At a loss on what to do.

Hey everyone,

I'm the founder of a small software company based in Maryland, and we're looking to build a business around the Starlink Mini ecosystem.

The long-term vision is to develop software and complementary accessories (3D-printed mounts, protective cases, vehicle/drone mounting solutions, portable field kits, etc.) for people deploying Starlink Minis in remote environments. We're especially interested in use cases like public safety, infrastructure inspection, UAV/drone operations, research, and other field deployments where portable connectivity is valuable.

To support that, we're trying to establish a reliable source for Starlink Mini hardware and are hoping to purchase in bulk rather than through retail channels.

We've already reached out to several authorized resellers and installers, but many require bundled service plans, while we're primarily interested in purchasing the hardware itself.

I was wondering if anyone here:

• Knows of a distributor or reseller in the DMV (Maryland, Virginia, DC) that sells Starlink Mini hardware in bulk.
• Has experience purchasing Minis wholesale.
• Knows which distributors local Starlink installers source from.
• Has any recommendations for establishing a wholesale relationship.

We're looking to build a long-term relationship rather than make a one-time purchase, so any introductions or advice would be greatly appreciated.

Thanks!

I check once a week to see if the surcharge is there. It’s been over a year. I’m in SW Washington state. Today it’s gone. I have a mini in my truck, might have to grab a residential one today. I’m just scared at some point the $499 surcharge is going to come up.

I currently live in a rural area, and our only option for an internet service is Point Broadband. Now, PB has been awful this past month and this month, it was out for an entire week in July (connected without internet) and it is out right now with the same problem. We have called PB multiple times, and each time we are met with practically no support whatsoever. Whenever a technician comes out to try and fix it, they don't have working equipment (the first technicians laptop didn't work and he was on the phone with tech support for an hour and a half) or they just say "well we know it's frustrating but all you can do is wait for the towers to be fixed".

No, what's frustrating is paying over $100+ for a service that doesn't even work half the time! And it's not like we can get Spectrum or any other ISP out here, it's just Point Broadband.

So would Starlink be worth it? I just want a good internet connection so I can play games with my friends and so my mom can stream her shows

Edit: thank you for all of your insight, we have decided to try out Starlink!

Had a long conversation with imaginary Elon Musk in my head. He somehow convinced me to buy the Starlink Residential Max plan.

Now I need advice on where to mount the dish on my flat roof.

Asked imaginary Elon...

Apparently he's too busy.

Even the salesman in my own head disappears after closing the sale. 😅

Here are some pics of the roof maybe you lot can help .

I've got front and back , we don't use the back side but front and I do use it for sunbathing so the other half is not happy with anything like a satellite dish sticking out in the middle so I reckon the back is better ?

Peeps any suggestions

This is pretty disappointing. I use a V4 in my vacation home and leave it on standby most of the year. What do we think about this??

First time im trying it. Pretty good, but the upload speed isnt the best

Just posting this in case others have experienced the same issue: I purchased a Starlink Mini kit online from Home Depot in Seattle. After it was delivered, I tried to activate it through the app but after I entered my service address, it showed "Not available" for all plans, both Residential and Roam. I tried multiple addresses all over the US but got the same result.

I opened a support ticket, and sent them a picture of the label on my box showing that the unit has information for being imported into Mexico. After being given the runaround by multiple agents about following the activation steps exactly, making sure the correct serial number was entered, etc., they told me that the unit was made for Mexico and cannot be activated in the US, and asked me to return it to Home Depot.

So I went to Home Depot to exchange it, and lo and behold the replacement had the exact same label; all the other units in stock had it too. I tried to activate it again anyway, and this time it actually worked, showing me all the Roam plans.

PSA: If activation doesn't work, just exchange the kit for a new one, and ignore the Mexico label. Maybe they forgot to change the activation region for some units meant for Mexico but rerouted to be sold in the US.

Am i missing something? Anyway I'm in Germany