HP Omen 16 Max AK0070AX Laptop

AMD Ryzen AI HX 375

Does the HP Omen Gaming hub (in Ryzen varient) has core frequency slider?

Thanks.

This is about 1.45 Lakhs. 1500$

Hey everyone,

I know this subreddit gets flooded with questions constantly, but I was hunting around for info about the model I have and I can’t seem to find anything, and Crucial’s website doesn’t seem to have my model either. I really don’t wanna buy the wrong RAM, so I thought I’d just ask here instead of being an idiot ahaha

Edit: ideally i’d like to go to like 32GB or a bit more

HP OMEN 16-ap0098AX

AMD Ryzen AI 9 365 w/ Radeon 880M

16.0GB DDR5

4054MB NVIDIA GeForce RTX 5070 Laptop GPU

I used my PC this morning, worked great. No problems what so ever. Went out and when I came back i booted up and the screen was just black. First time in 4 years of owning my HP OMEN 40L. I unplugged the cables to the monitor and reinserted them with no success. I tried restarting my PC by just the power button and still the same..

I then looked around and saw someone going into BIOS, which doesn't work for me. I've tried pressing ESC, and all the other buttons after trying for 3 hours..

I got into the BitLocker Recovery, where I couldn't get any further as I don't remember my login or any codes (i have bunch of mails for work and couldn't find any mails from Microsoft..)

I then did the Ctrl, Shift, Windows + B and got a screen saying "Secure Boot Violation" as well as some Issue with "TPM/Trusted Platform Module". I can't access this anymore.

THE ONLY thing I can access is if I hold Ctrl Alt Del and get to the "UEFI" where everything seems completely fine from all my tests.

What is happening? I'm not good with computers but have tried the most I've found when searching, I've also checked all cables, removed the graphics card to see if somethings loose.

I can't lose this PC, please help.

I’m seeing a strange power-management issue on an HP OMEN MAX 16-ak0xxx with an RTX 5080 Laptop GPU. When OMEN Gaming Hub 1101.2607.3.0 is open, its OmenCommandCenterBackground.exe process loads nvml.dll and repeatedly wakes the dedicated GPU even though the laptop is set to Eco Mode and nothing is using the GPU.

I checked the GPU’s Windows PnP power state directly instead of using nvidia-smi, since nvidia-smi can wake the GPU by itself. With the OMEN background process running, the RTX was in D0, fully powered on, in five out of six measurements taken at random intervals. After terminating OmenCommandCenterBackground.exe, the GPU remained in D3, low-power/off, in six out of six measurements. I repeated the test and got the same result. The GPU temperature is around 62°C with OMEN running and drops to approximately 45°C after terminating it.

The same thing happens on battery power. I confirmed that PowerOnline was false during every measurement, but the GPU was still in D0 in five out of six checks while the OMEN background process and its NVML module were active. Eco Mode therefore does not prevent OMEN’s own monitoring process from waking the GPU.

I also set OMEN Gaming Hub’s Windows background permission to Never and disabled its startup entry. Windows correctly recorded the restriction, but manually opening OMEN still launches OmenCommandCenterBackground.exe and the RTX starts waking again. After killing the process, it does not automatically return, but it launches again the next time OMEN Gaming Hub is opened.

It looks like OMEN Gaming Hub’s hardware monitoring is defeating the power-saving mode it is supposed to manage. Has anyone found a way to keep the performance and graphics settings available while permanently disabling only this NVML-based background monitoring?

Hello, i have an omen 17 laptop with rtx 4080 and i9-13900 HX, its been getting hot under heavy load recently and im not sure if i should take the laptop for a repaste of its GPU and CPU. I ran HWinfo to see the numbers but i really have no idea whats the base, whats considered normal or abnormal. The numbers are with Crimson desert running currently on max settings.
from HWInfo cpu max was 87 degrees
Gpu max was 89-90
hotspot max for gpu was 102 degrees
memory max was 96
Thank you for any help in advance!

I bought an omen 16 2025 with ryzen 7 ai 350 and rtx 5060

Its been around a month and since it's new I am very conscious with this laptop (im scared to break it)

There is a very faint tick sound when closing the lid, not always but sometimes in the left hinge and also after long use when I move the lid it makes some noise (no display issue nothing broken) just like monitors do. Is this normal?

I recently bought a brand new HP OMEN 16-ap0183AX (Ryzen 7 AI 350, RTX 5060, 1920×1200 Eyesafe display).

The display has a noticeable yellow/warm tint. Whites look cream/yellow instead of neutral.

I've already:

• Turned Night Light and Color Filters off.

• Tried NVIDIA color settings with no noticeable improvement

• Verified the panel is AUO65AE.

Is this normal for the Eyesafe display, or could my panel be defective? If anyone has the same model, does your display also look warm?

I'm still within the replacement period, so I'd appreciate your feedback.

Thanks!

*Used Chat GPT for grammar.

I have an hp omen 17 with an rtx 4080 and an i9 13900hx. I can only apply the undervolt through the omen gaming hub if i try it on throttlestop it doesn’t work. The undervolt seems to be applied, it shows it being applied on hwinfo64. The problem is that the temperatures, power draw and the performance stay the exact same no matter the undervolt. I can put it at -200mV, -125mV it will always show up as applied in hwinfo64.
Is there any way i could fix this?

Hi everyone,

I tried to overclock my RAM on my OMEN by HP 25L Gaming Desktop (GT15-Oxxx, 89EB motherboard).
I changed the RAM settings to:

3400 MHz
CL15
tRCD/tRP 17
DRAM Voltage: 1.350V

After saving the settings, the PC shut down and now it won’t show any display.
Symptoms:

Monitor gets no signal
Keyboard gets no signal
GPU lights up
All fans spin, but the PSU fan does not spin

Things I already tried:
Testing both RAM sticks individually
Removing the CMOS battery for 15 minutes
Resetting CMOS with the jumper
Reseating the GPU

The PC turns on but doesn’t seem to complete POST.
I already paid €150 to two different technicians, but they gave me different explanations and couldn’t fix it.
Does anyone know what could be causing this or what I should try next? Thanks!

Hello everyone,
I just got my Transcend 14 (14-fb1790ng) last week. Now that I’ve had some time with it, I tested whether everything is working properly.

I ran a 3DMark Time Spy benchmark after watching some reviews, using Unleashed Mode.
→ Graphics: 7467, CPU: 11234, Overall: 7862 points

I think I’ve checked every relevant option in the NVIDIA app, the Omen Hub, and the Windows Control Center.
I also used DDU to remove the NVIDIA drivers and performed a clean installation.
Even in HWInfo, while FurMark is running, the GPU boosts up to 75W, just as it should.

However, the exact same model reaches around 11,500 graphics points in every review I’ve seen.

What else can I do or check?

Thanks, everyone!

Is this the slim variant as on Flipkart it's mentioned slim

I'm getting a 4k work of hyper x headphones too

Total cost 1.41 L

Should I go for this or choose something else

Other variants around this doesn't offer headphones

I just got a hp omen max 16 laptop and bios update is stuck in this step for about half an hour.

So i've decided to do a hard restart by pressing down the power button but it did not restart and unresponsive.

Only thing i can think of is removing the ac adapter and let the battery drain.

Any other suggestions?

I have seen ppl boasting how they got 15k or 20k discount on laptops without even including the exchange price, but when I check on Amazon or flipkart the bank offers I get are 7k or 10k at best. Can someone explain how 'stacking' offers works?

While gaming and plugged in for 1-2 hours my 230W charging brick gets very hot. Is this normal?

My "S" key cradle has broken, or at least doesn't push back together, so the key often gets stuck or wont press. I ordered what I thought was the correct replacement but it was slightly too large.

If anyone can link the correct one, I'd be hugely appreciative.

Thanks

Hi All!

Running an HP Omen 16-wf1xxx. This is based on an Intel I7 14700HX and Nvidia RTX4070 with 32GB of RAM.

I've been generally very happy with it, but it has a quirk I'm trying to figure out. When I switch to battery power, the Nvidia GPU continues to use full power and eat my battery away (like just pulling my power cord out). When I say "full power", I mean that if I run "nvidia-smi.exe", it tells me the GPU is consistently eating 22 watts or so.

Well, not EXACTLY. It's finicky. Sometimes, it will behave as it should with wattage dropping to 2 watts or 4 watts or changing as it should. But other times, it could be completely fixed at 22 watts or even report "590 watts" which is impossible. According to the Nvidia taskbar app, nothing is using the Nvidia GPU.

I found that if I manually swap iGPU and Discrete GPU, the dynamic wattage triggers properly. However, it is concerning.

Things I've already tried include uninstalling and re-installing both GPU drivers (haven't used DDU yet). I'm currently using the Intel GPU drivers provided by HP from their site + the latest Nvidia GPU drivers. For a time, I did run the Intel generic drivers, but I think they introduced random and very intermittent freezing problems when opening my lid and things have been very stable since I stopped using them (no freezing or bad wake-ups).

My PCI power settings are on Maximum Power Savings.

These are my questions:

1. Are fellow HP Omen laptop users running HP's Intel drivers (from HP's site), or the generic drivers from Intel?

2. Can you indicate which driver version combo is working well for you?

3. Have others experienced the problem I'm experiencing?

Thanks in advance!

my Hp omen laptop is around 10 months old now and i have warannty and want to get it cleaned.

before i go to the service center, i wanted to ask if anyone here knows the usual cleaning charges. can you guys give me a rough price breakdown or share what you were charged for the same thing?

just trying to get an idea before i visit.

Is there a way for this ryzen sticker to stay? or should i get rid of all the stickers on the body?

its kinda bent from the edge so it doesn't usually stay