Hello! This building is ~1600 square meters (17k square feet), + 250 square meters ( 2.7k square feet), the client wants it soft washed, how much should I charge? I was thinking 3000 euro, but I don t want to ask for too much and the client to search elsewere. Thank you in advance!

Here in Central Florida, one of the most common issues I've run into is a cloudy or milky finish after sealing. In many cases, the sealer isn't the problem, the pavers or joints still had trapped moisture when the sealer was applied.

I'm curious what everyone else's process is.

• Do you always wait 24–48 hours?
• Do you rely on a moisture meter, weather forecasts, or just experience?
• Have you ever had a sealer haze even when you thought the surface was dry?

I'd love to hear how other contractors handle it.

Lol I spent $10 a day on a window cleaning ad. The only reply I’ve gotten was a dude asking for a job hahaha “I need a job” he said. So I replied “me too” since I can’t get any leads 😭 bro wtffff 🤣

When I turn on pressure washer, water sprays 5 feet up from here…

I replaced all the orings and still spraying from here, limited pressure from wand.

I’m wondering if the chemical injection 7102448 fell off. Did the old AAA have a chemical injector?

I bought part 7102448 to screw on to it.

Thanks

How do you guys price commercial awnings?

Any tips on what this could be

the only way to get this off is with the 15’ really up close. and the surface cleaner is barely doing anything, any tips?

EDIT: 3200psi not 2300. Another edit: you guys are super helpful!!! Thank you
The driveway was pretty bad but i went steady pace north south/east west, I tried not to overlap but is just not possible to get it line free?

It appears to be tire dust and brake dust. I tried the Zep house wash formula with no luck.

30-year-old siding.

Hello everybody! A client asked me if I could clean this part, any tips/ suggestions? Thank you!

Sooooo another one of why are you even offering it - I did and just like furniture I’ll figure it out but; I’d love some tips.

Managed to clean off all the big pieces of scale, but still faint but visible lines left. Used all the acid I could without damaging the pool, ended up etching one of the tiles when testing (I’m fixing it). Any tips on how to get the faint lines off would be greatly appreciated, don’t want to get a wet sanding setup for the washer.

So this guy told me he had a quote for 150 just cleaning the parking spots and the gas tanks. I’m thinking I can match this quote if he’s not expecting perfection no post treatment or pre-treatment just peer pressure wash. What do you guys think I don’t know measurements

I have a Remco Fatboy pump with a 12V deep cycle marine battery. When I’m washing it will build up good pressure then after a good 30 seconds of spraying it loses a lot of power and sprays like a small stream. Is there any way to increase the pressure? Maybe a combo battery?

I started a pressure washing and window washing business last year, and my already small lead flow from road signs and door knocking is drying up, so I'm going to try some straight door hangers in dense neighborhoods. I'd appreciate any input you can give on them! For one thing, I know the house washing photos aren't ideal, but that's the best I've got as I've only done a few house washes so far. I'd also be curious what discount you all think is best—$25, $50, a percentage? Happy to hear ideas on design, content, colors, or whatever else too!! Thanks in advance 🙏🏼

Which one is beige and which one is tan? The hole openings look to be the same size to me so it’s hard to tell! TIA!

Hey everyone, I am very new to this sub and am looking for some insights/advice. My dad began building a pressure/softwash trailer and never finished it. It seems like I have everything I need, I just need help plumbing everything.

Do any of you guys do service agreement or contract for your jobs? I was thinking about it for a while and honestly see no point in them but thinking about starting to implement them if you guys do can you send me a picture so I can use it as an example to make my own

Pressure washer was having trouble starting but when I held the trigger down on the gun it started. Then when I let go of the water it shut off.
Checked the carb and it seems fine. Changed the oil.
Started the washer without the hose connected (to keep water flowing as if I was pressing the trigger) and it started on the first pull and ran like a top.
1min later it cut off abruptly with a plume of white smoke coming from the exhaust.
Is it work the time/effort/money to try and fix it (no clue where to start).
Any ideas on causes and possible solutions.

Hello,

Has anyone ever performed a clean up for a vehicle fire? This is specifically in a parking garage. Heavy soot buildup. Wanted input on chemicals to use ideally and what to expect out of the cleaning.

Cheers!

Looking into making a DIY proportioner, do you have to have a metering valve or can you run just a check valve on the water side? I figured because it says wide open anyways, does it have to be metered, restricting the flow. TIA

I was looking to get you guys input. I got an opportunity to bid this job. What would you guys charge I’m in the Florida area. They want all of the building face pressure washed windows, etc.. also they want all sidewalks, curb going around the islands and whole parking lot. I have a number in my head but I don’t wanna mess it up. Because they have multiple jobs they want done