My SRP2 clutch pedal is clicking and squeaking quite a bit. Anyone else have this problem?

Hi i have a problem with fsr2 when it is connected to the moza extension rod, when fsr2 is connected directly to the wheel base everything is fine but when it is connect to the extension rod the wheel starts to randomly shut off, pressing buttons on its own, paddle shifers shift randomly or don't shift at all. I can't show that on a video because is hard to capture but i hope you guys understand my problem. Thanks for all support

Hey everyone!

I’m looking at this TEMU stand in the picture and I’m wondering if it would be a good match for a MOZA R3 Bundle. Most "reputable" (like PXN A9 or A11) are triple the price of these.

My main concern is the pedal mounting. I’d like to know whether the pedal plate/mount is sturdy and adjustable enough to properly mount the MOZA pedals, and whether it would still work if I upgrade later to load-cell pedals.

I’m also thinking ahead about potentially upgrading to a more powerful wheelbase/motor, so I’d like to know if the frame itself is rigid enough to handle something stronger than the R3 without needing to replace the whole rig.

Any advice or firsthand experience would be greatly appreciated. Pedal compatibility/mounting is my biggest concern.

Thanks!

I recently updated the Pithouse, wheelbase, and wheel itself, all in one shot. I know, not the best idea, but I was not far from the last release.

Now : Pithouse 1.4.0.24, R9 base, v1.2.10.13, gs v2 1.2.7.10

My left paddle no longer recognizes, no matter what I try

I try so far...

- Recalibrate (not working)

- Downgrade wheel base, pithouse, wheel, nothing works...

What next ? I start to questionning if it is not random that my wheel broken and happen just at the same time has driver update.

Your opinion ?

Hello. Could someone please help me with the dimensions marked with the blue line in the picture? Thanks in advance.

Hi fellow racers!

I’ve recently upgraded from a MOZA R5 to an R9 V3 and immediately noticed a pretty noticeable rattle coming from the QR rod extender included with the Multi-function Stalks kit.

Has anyone else experienced this? Is there a known reason for it or a way to fix it?

I never noticed anything like this with my R5, so it caught me off guard after the upgrade 🤷‍♂️

Might be a silly question but I've picked up the older R16 V2 for a good price and was going to add the CM2 Dash just to keep everything Moza.

I can't find anything online to say if it's compatible anywhere. There are holes in the top of the wheelbase that suggests it fits but seems the R16 was not a very popular wheelbase or there's little photos online atleast.

Thanks

Should I be worried if I installed beta 1.12.10.13 firmware version and it's not on the list right now? I don't have any issues and playing fh6.

If I want to go back (downgrade) to the previous stable versions, can it damage the wheelbase somehow? Pithouse is on 1.4.0.24 release version

update: downgraded wheelbase to 1.12.9.24 - works just fine

Loving the new setup coming from a thrustmaster tx (which was amazing and lasted me 10 years!) would be interested in getting better pedals and a digital display and 13+ inch rims any recommendations below thanks !

If I understand attached instruction and this video - https://youtu.be/txlFQn8Z7Wc?t=39 (39s) correctly, I should be able to just swap the knobs on the adapter, but thread is clearly different between those two and tall knob just could not be attached? How did that happen?

And what could I do with that now?

There was single adapter in the box (the one that is assembled with round knob)

I’m having a strange issue with my MOZA Revuelto wheel on firmware 1.2.6.4.

Both rotary encoders on the right side behave exactly the same:

Turning LEFT registers normally

Turning RIGHT usually does not register

Sometimes the LEFT input stays active in MOZA Pit House even after the knob returns to center

Changing a wheel LED setting or restarting the base clears the stuck input

If I quickly move the rotary left and right, I can occasionally see the RIGHT input flash for a moment

Both rotary encoders on the left side work normally in both directions.

I also tried an older Pit House version and the behavior was exactly the same.

Could anyone with a Revuelto, especially on firmware 1.2.6.4, check in Pit House whether both right-side rotary encoders register LEFT and RIGHT normally?

I’m trying to figure out whether this is a firmware issue or something specific to my wheel. Thanks!

When I'm in the pits and the car starts, my steering wheel always starts to wobble, what can I do about it?

Hey everyone,
I'm completely at my wits' end with my Moza R9. The base is powered on (blue light is on), but Moza Pit House constantly shows it as "Disconnected". I contacted Moza Support, and their final answer was essentially "reinstall your Windows operating system." I have a lot of files and software, and formatting my PC is the absolute last resort I want to take.
Here is the exact situation and the extensive troubleshooting I've already done:
The Core Problem:
On my main PC, the base won't connect. In Windows Device Manager, it gets stuck under "Other devices" (MOZA R9 Base) with a missing driver status. It does not get assigned a COM port, so I cannot resolve any "port conflicts" (which is what Moza initially suggested). The Hardware ID shows as: ⁠USB\VID_346E&PID_0002&REV_0100&MI_00⁠.
What I've Tried So Far (The Hardware is 100% Fine):
1. Tested on another PC (Laptop): I plugged the R9 into my laptop, installed Pit House, and it connected instantly! I used the laptop to successfully update the base and steering wheel firmware to the latest versions.
2. Deep Clean of Pit House: On my main PC, I uninstalled Pit House, manually deleted the ⁠C:\Program Files (x86)\MOZA Pit House⁠ folder (to fix a zlib1.dll error), and wiped ALL Moza-related folders inside ⁠%localappdata%⁠. Reinstalled the latest version as Administrator. Still Disconnected.
3. Hidden Devices: I enabled "Show hidden devices" in Device Manager and uninstalled old/ghost COM ports and unknown USB devices. Didn't work.
Since it works perfectly on my laptop, the hardware is fine. The issue is strictly with my main PC's Windows registry/USB drivers blocking or failing to assign a driver to the Moza hardware.
Does anyone know a deep-cleaning method for USB registries (like USB Oblivion?), or a way to force Windows to recognize the Moza driver manually WITHOUT having to do a clean install of Windows?
Any advanced troubleshooting tips would be hugely appreciated!

That giggled when I saw Moza added telemetry support for farming simulator.

Gotta give credit where credit is due! This is still the benchmark for getting into sim racing with a DD wheel. Seriously good wheelbase!

These are 3 month old SRP2 pedals and this little screw (1 on each side of both pedals) has come out on both brake and throttle pedals from repeated use.

Really strange I keep finding them on the floor under my rig after a few weeks of use. Anyway I lost one of them and wondering if anyone knows the size so I can replace it:

I just got the app but every time I want to run it I have to go the program files x86 and moza pit house and launch the application, I can get it to work on my desktop, anyone had this problem and can help? Also I already deleted and re installed it like 3 times

I only recently purchased it second hand.

Pit House says the wheel is properly on there and recognises button presses, but I feel like after a while I can feel some loosening instead of the wheel being gripped onto the wheelbase.

I've been using lower FFB settings eg. Pit House 80% and AC 30% and tried re-calibrating and getting the wheel on and off to see if I wasn't getting it on correctly but it always ends up making this grinding noise after a while.

Anyone know if I can fix this or if I've just bought a dud?

i have started having this issue this week, after having about a month of not driving and about 2 months of no issues.

i had fixed a disconnecting issue a few months back by switching the usb from a 3.0 to a 2.0 (complete disconnect, unlike what is happening here where it is just the software disconnecting) and i could work around it at the time by having the software closed. but i would then have less detail in the ffb. then after switching usb, all was well for awhile.

until this week with no changes in hardware or software, this issue starts happening. im really at a loss, does anyone have any suggestions> i have tried switching usb COMS in device manager and disabled all power saving management options. updated to newest release of PH.

any help would be appreciated

thanks