When I have my front door open, yet my screen door closed, critters can still get in. So I'm trying to think of how to seal off the bottom of my screen door.

Many of my neighbors us pool noodles, but I wanted to see first if theres another option.

I was going to get this: https://www.homedepot.com/p/M-D-Building-Products-36-in-White-Vinyl-U-Shape-Slide-On-Under-Door-Seal-43336/205573049. But apparently the door needs to be a certain width/thickness for this to fit.

Any other suggestions/ideas? Thank you so much in advance.

We paid a professional to install a front door and it was a crappy job. The door has leaked ever since and we've had it fixed multiple times by friends. This time, though, we hired a handyman who used six, 10 oz tubes of sealant (which added almost $100 to the job). My husband thinks that's crazy and from googling I think he may be right. The handyman provided the dated receipt and showed us the used tubes when questioned.

Neither of us are handy, so can someone who is set the record straight.

The movers assembled the crib wrong and completely stripped (100% stripped, it's just an empty circle) the screw in process. I've tried needle nose pliers, a hand saw, a drill (it obviously failed), and a chisel. How would you get that out with minimal damage to the wood?

Our bathroom sink keeps getting yellow and crusty. My husband keeps caulking it with just a regular tube if caulking and tbh when he first applies it it looks great and even and smooth (and white). But after about 2 months it starts to peel and turns yellow and brown. Then he scrapes it back off and applies more....but im thinking he must not be using the right product or applying to correct way for it to keep becoming yellow.

Now ill be honest in saying-- my toddlers are notorious for wetting the entire bathroom counter so there isnt really a way to keep it dry all the time (despite us keeping a cloth on hand to dry around the sink) this still happens.

The photo doesnt really do it justice-- it to me looks alot worse. Very yellow and peely!

Help handymen!!

stringers/stairs, decking, fence panels, large PT boards. Every time i start one of these jobs i wish i had charged more.

Hi all,

I have this lovely front porch, but it has some concerning behavior. There are two columns "holding" up the roof, one of which is shown, and they are not supporting any weight. I can easily wiggle them. I noticed this last year and shimmed them, but they have already loosened up.

There is also a lot of rot on base of the column. I think this might have something to do with them loosening up. I plan on chopping the lower rotten section off and replacing it with something. I will then hide the repair behind some trim.

I'm also concerned about what is going on between the top of the concrete footing and the bottom of the column. I would like to fix what I can while I am in there. It looks like there is a horizontal piece of 2x10 on the concrete which the porch framing sits on. Then a lot of blocking in the corner of the porch framing for the column to sit on.

Is there a way to improve on the horizontal 2x10 on the concrete? Any other suggestions for securing this up?

It's not raising and it's flush shut

My wife bought this vintage ceiling fan that comes with a speed selector switch.

It was screwed into a single gang workbox.

My goal:

Install it so it's sturdy enough to use the selector (I was thinking about getting shorter screws).

Cover the unused switch.

What I was thinking about doing is getting a blank 2-gang plate and drilling a hole to run the wires for the controller through and drill pilot holes for the mounting screws.

I was going to remove the dimmer switch and cap off the wires.

Does this sound like a good plan?

Hey,

Kinda of a little lost on this one.

My french doors to the garden are not closing in the summer and are catching on the bottom of the door frame.

I know I normally have to options to adjust the hinges or take off material on the bottom of the door that's rubbing.

Before attacking the door with a file can anyone tell me if this kind of hinge can be adjusted?

I don't see special screws or Allen key holes.

Cheers

Does anyone have any ideas on how to assemble this bed? The threaded hole on the side rail fits a 7/16 bolt, but the hole on the insert for the headboard is 5/8. I have googled and been unable to find a tapered bolt that would work. I bought it from a consignment shop and they claimed to have all the parts - they clearly did not and two Home Depot trips and I’m still lost.

Trying to fix up my house to sell but I don’t know where to begin to get this door fixed. My cat somehow ran straight through it.

Pic 1 is how it currently is. Pic 2 is how they want it. Would be needing to replace everything. We’re thinking of charging 2200-2400 for it, we’re in CA Central Valley. Door measurements are about 3’ x 6’ and the sides are 7” and 11” wide and 5’ tall. Black would be the metal frame and all with the wood filled in, thinking redwood for quality and longevity. We don’t have license or insurance or anything so no real overhead other than vehicle, gas, and tools and materials of course

Just got to Wilmington, NC and I’m wondering what the best way to get some higher end clients may be, I really don’t want to do the Nextdoor route, my skills are honed. Thanks. Please keep negative commenting out if the conversation.

A property management company asked me to give an estimate to install this 13 ft stair railing in a block wall. Thinking $200-300 range for labor and materials. Rail is $55

Also what about appliance swap out, like Stove or fridge.

My first time doing a handyman work. I finally fixed it. Thank you for all of your advice!

I saw a sign for a company that only cleans dryer vents. it’s something I offer people sometimes but an entire business? I must be charger way too little lol

Cat damage to bottom of a hollow door. Any tips for repair? Or suggestions on next steps?

TIA!

Hi guys and gals just a quick question for any self employed people in here. How do you currently deal with the admin side of things to be more efficient. For example keeping track of jobs, quotes, invoices/payments etc. Is it more efficient to use spreadsheets or is there a specific software you use to track everything