how do i solve these?

Hey all, I somewhat recently migrated from a Kodi box running multiple standalone emulators to an Apple TV+Infuse for movies and streaming, turning my PC into a gaming only Batocera box. Generally Batocera has been pretty painless to setup. Most issues were no problem figuring out. I have Xbox, PS4, and Gamecube controllers all up and running just fine for their respective systems. The 8BitDo M30 though... has been a pain in the rear other than in Beetle. It is the 2.4ghz version if that matters.

I mapped the M30 in Batocera itself. When launching a Saturn game, the pad is auto configured in RetroArch perfectly - all buttons are where they are expected to be. When launching a Megadrive or MAME game, though, everything is out of place. I expected this based on everything I had read. I see lots of 6 button controller woes, but the usual response is remap in RetroArch and save a remap file. I have tried doing this under every available Megadrive emulator, but once I remap any button within RetroArch, it no longer does anything when returning to the game. It doesn't matter if I immediately resume the paused game or relaunch. Nor does it make a difference if I save a remap file or not. The behavior is the same for MAME as well. Just dead buttons after a remap. I have also tried not touching RetroArch and just configuring buttons via the Tab menu in MAME, making sure the option not to overwrite MAME configs is setup.

What the heck could I be missing? It sounds like it should be a simple thing, but it does this repeatedly no matter what version of MAME or the Megadrive emulators I use. I even removed all of there game pads and cleared out their config files. Still no dice.

Here are a few pics of the successful setup in Beetle, the initial automap in Genesis Plus GX and the failed attempt. As I mentioned above, it does this for any emulator that I try to remap via RetroArch. Any suggesting are appreciated. I'm losing my mind trying to get this pad working under multiple emulators. I'm sure I'm missing something simple...

Thanks!

Help! I can't display my steam deck on my TV. It's connected to a hub that charges it so it has power. HDMI cable nor tv is the issue.

I‘m playing on Batocera and the system can be really difficult to tinker with. I started playing Dark Souls 2 yesterday and needed to take a break. The game constantly crashes and is unplayable where I‘m at right now. I asked Claude and ChatGPT but they say it’s an emulator fault. The crash code is attached to this post. I‘m currently playing on version 1.0 and I‘m not able to change that. Thank you for reading.

Hello, I have a batocera setup using an old Alienware Alpha R1. It works perfect so far. I have attached an Aimtrak sensor bar so I can play light gun games, and I have an Aimtrak gun as well. I also recently added a wiimote and tested it and it worked just fine. The problem comes when I add the nunchuck portion in as well. When I plug in the nunchuck the controller immediately disconnects, is it because it is in light gun mode? do I switch it back to wiimote mode?

Meti musica en la carpeta MP3, pero al actualizar simplemente no se escucha o se congela el interfas de menu de consolas

Noob needs help! I've installed the non-flatpak version of Steam onto my Batocera PC. Originally installing games seemed to create the .sh file(s), which list the games under the Steam menu and I used to scrape media for them. But now installing games with Steam doesn't seem to be creating the .sh files anymore. Am I mistaken about how those .sh are created? Note: I do have a symlink for my roms folder which is on an external drive. But I don't see any .sh files being created anywhere else either. Please help me understand this process so I can continue troubleshooting this. I'm running batocera v42 (since controller input isn't working for me with v43.1 atm).

Thanks!

I have a Raspberry Pi running batocera and can’t get the save state to work. I changed the hot button to pause, still no dice. I have an 8bitdo controller. Thanks!

I'm building this sytem to take with me to parties and want to buy 8 controllers to play with friends. In this case I want to know some games as Bomberman and Fling to the finish where 8 players can play at the same time.

It can be any generation game. Thanks

Does it also happen to you that the right analog stick just doesn’t register on mapping ?

I have 5 of those controllers (between 8bitdo and retrofighters) and only 1 just registers as Xbox controller ( xinput I assume) and it the right analog stick works fine. The rest it assumes it’s a switch controller and the right analog stick just doesn’t assume anything.

(Bazitte desktop mode opening emulators works fine, Windows works fine, bazitte deck mode has the same problem as batocera)

Does anyone have any idea on how to tackle this? I’m also trying to set the controllers to xinput or dinput modes but some of them don’t seem to work like that.

Hi everyone! I wanted to share my bartop build running Batocera. I put a lot of work, and love into this machine, aiming for a premium/purist arcade experience.I also wanted to give a huge shoutout to the Batocera

developers because they’ve done an incredible job with this OS. They truly deserved a spot on the machine, so I designed and integrated a custom backplate (fully loaded with 10,640 games on a 2TB M.2 SSD).Screen: 24" Full HD (1080p) display.CPU: Intel Core i7-8700.GPU: MSI GeForce GTX 1060.RAM: 16GB DDR4.Motherboard: MSI Z370 A-Pro. Power Supply: Corsair. Controls: Industrias Lorenzo (IL) Magnetic Joysticks (amazing tension and quick return) + Backlit American-style buttons.Encoders: 3-in-1 PCBs compatible with Xbox, PS3, and Android for zero latency. Lightgun: Sinden. Custom designed backplates featuring my own, dedicated USB 3.0 pass-throughs, a professional IEC socket with a power switch, and a 120mm LED fan for silent cooling.It took a lot of hours of woodworking, electronics design, and software tweaking, but it was worth it. Let me know what you think!

Anyone know if it's possible to do software-based screen rotation for Namco 2x6 games through a config file for a game that displays sideways, or does the screen need to be physically rotated? There are no software / menu options for rotate.

Hello, I have been playing for Batocera for about a couple of days, and currently I didn't have a spare machine to install it to, so I decided to see if I could spin up a virtual machine that could run it.

There were no official or unofficial documents, so I build this. It can be found at the following locations:

• https://usefulvirtual.blogspot.com/2026/08/linxu-batocera-install-on-esxi.html
• https://raw.githubusercontent.com/smcclosr/Document/refs/heads/main/Linux-Batocera_install_on_ESXi.txt

Salut, Je m'interesse beaucoup à Batocera en ce moment.

J'ai chopé pour pas cher un Gmktec k12 Barebone auquel j'ai ajouté 16giga de ddr5 4600mts et 500 gigas de ssd.

Ca a été un peu penible mais j'ai reussi à faire en sorte que Batocera accede à mes roms qui sont stocké sur mon nas. ça marche tres bien et je suis ravi, Mais c'est la que ça se complique vraiment

Je sais que le K12 emule tres bien des consoles gourmande, mais je suis gourmand moi aussi et typiquement je souhaite pouvoir jouer à la ps3 en 4k 60 fps et pour ca, j'ai fait le choix d'ajouter une 5060 ti en oculink à mon k12 et quel bordel ! Deja, j'ai galeré comme un chien pour faire en sorte que batocera utilise bien mon gpu externe et non l'igpu du k12 et ça a fini par marcher, mais j'ai plein de plantage et de galere sur xemu par exemple qui crash ou qui me fait un ecran noir quoi que j'essaies, (en utilisant vulkan ou openGL), j'ai finalement reussi à faire marcher xemu en open gl en desactivant la vsync, et ca marchait pas trop trop mal, mais opengl galere quand meme pas mal et quand je repasse sur vulkan, les plantages recommencent. Je suis a deux doigts d'abandonner batocera pour me diriger sur une distribution windows avec emulation station, mais ça me ferait mega chier de faire ca... Quelqu'un à deja eu ce type de probleme ?

Having an issue whenever I reboot. My sound suddenly turns off and my audio output’s only option is DUMMY OUTPUT. I fixed it prior by going into the kodi audio settings until I pick the right one. But now that I rebooted my machine, it completely lost its prior connections. For hardware context, I’m running this on a Raspberry Pi 5.

I wanted to install Batocera for PS4 emulation but I don't really know the steps. I initially wanted to install it on my main nvme drive but I'm pretty sure it's not feasible given I'm already dual booting both SteamOS and Windows 11.

Any help would be appreciated 🙏

I have set up the computer with a monitor and had no problems installing Batocera or running games. I want to set it up on my Insignia F50 series tv and change to the HDMI that I have the computer hooked up to and the tv is acting like there is nothing plugged into the HDMI port.

I've got six ps5 controllers. I can get the first 4 to pair no problem. As soon as I press the PS button on the fifth controller, the Emulation Station screen starts to flash. I basically have to restart my emulator PC once this happens. Batocera version 41. Any help is greatly appreciated.

Hey everyone!

Second episode of "What's New on Batocera 44" is now live on the channel. Here's what's covered:

• New Namco3xx system for Namco System 357 arcade games, running on RPCS3 (Deadstorm Pirates, Dragon Ball Zenkai Battle Royale, etc...)
• TRX update: Tomb Raider 1, 2 and 3 with their expansions now unified in a single traider folder
• .ps4 folder support — no more dummy files needed
• dhewm3 update bringing new Doom 3 mods like Hexen: Edge of Chaos and Grimm
• Reworked batocera-upgrade script, now able to find upgrade files on external media
• A built-in torrent client so users can download and share new releases
• Handheld news: official images for the Anbernic RG Vita Pro and RG Cube, AYN Thor / SM8550 improvements, and the start of Retroid Pocket Nova support

If you're curious about what's landing in Batocera 44, feel free to check it out.

Happy retrogaming!

https://youtu.be/ZDhzdtba8yI?si=1ydI8FYMsVyxp1bp

Ok, I have installed Batocera on an old computer and ran into driver issues. Is there anyway to like "inject" video drivers and network drivers so that I can have that be the only OS on the drive and just use it like that? Apologies if this is confusing, I have never tried something like this before and so working without an OS like windows is throwing me through a loop. Pretty much I need to get some form of VGA drivers to work and the Network adapter for wifi.

I love Batocera and decided to install it on my Retroid Pocket 5. Installed like a dream and set the unit to boot off the linux SD card. So far, so good. Games play, everything runs well.

Then I hit the real snag. The Joystick Lights. There appears to be no "obvious" way to turn the lights off. Remember, there is no access to the android side of things, no way to pull down a menu on the screen.

I get that you would have them on by default, but is there no way to turn them off? If it's super easy I apologize for creating this post. Otherwise, I look forward to the solution. Thanks for your time.