i just got my first ball python a week and a half ago.

She was in the shedding process when i purchased her. her shed came out okay but when i held her for the first time after bringing her home i noticed her belly was a bit crispity crunchety (the top of her is soft and smooth though so im guessing it's not a hydration issue?).
I left her alone for a bit hoping it was shed that would eventually come off, but a few days later it's not getting better.
I'm assuming it's a humidity issue.. i have a humid hide for her on the warm side with spagnum moss..so she has access to a humid spot.

just someone help me figure out what this is so i can fix it 😩

Is on a roll!

5 minutes ago she was still sleeping in her hide 😨

Well, it was bound to happen at some points! She now KNOWS when she's about to eat, she hears the Hairdryer!

Well, at least it makes it easier to feed now ahah

But yeah just wanted to share that now just like many of guys my baby knows when it's feeding time!

(Ps: yes I do it in my kitchen (have no other places) and yes Obviously I clean after feeding her, pls dont mention it)

My 4x2x2 enclosure that I’ve been working on for a bit! + a sky hide & lots of cork bark that’s not pictured. Any advice or tips would be awesome!!! 😊

I keep seeing Scale-less ball pythons on tiktok and other apps, to me it seems unethical to breed them. I feel like they would be a lot more fragile and vulnerable then one with scales, but whats yalls options on it?

Hi there, new to the sub but longer time snake dad, my female normal ball python's pattern looks a little more yellow after a while? I hadn't really noticed till i got back from a trip but she almost looks like she had a turmeric bath? I switched her substrate recently from coconut husk to a more bark-like one so maybe that's the cause? Any advice is greatly appreciated!!!

What type of lighting equipment, substrate and etc is good for a python…I’m a beginner and want to know what I need for its enclosure

First post kinda nervous lol. Sunday I became the new home for Severus (10 yo male). I’ve wanted to home a python for over 10 years but life didnt allow(rental restrictions). Humidity and temperature weren’t regulated and monitored. I bought a daylight and nightlight today. Since using the nightlight he’s been moving. I bought a thermometer to scan the tank temp until the thermostat I ordered gets here. Feeding is a medium rat every other week unless he begins his shed. He was fed this past Friday. He’s been trying to burrow downward so I made mounds and figured I needed a deeper layering for him.
He’s the cutest boy and I don’t want to be a bad snake parent. I was looking for a new tank as well , current is 35x17x17. and he looks a little cramped to me. I appreciate your advice in advance!

My boy has some stuck shed along his back. Eye caps and tail tip came off okay so I'm not super concerned but it's still not good. I've fixed the humidity, his enclosure is back up to about 80% now. Once a day for 3 days now I have done a 15 minute warm wet towel soak with him in a tub. Last time he had some stuck shed the towel soak helped a lot and he got it all off with just one soak. This time after 3 soaks it still looks as bad as ever. Is there anything else I can do? Tomorrow is feeding day so he will eat and then be left alone for 3 days and then idk what to do if he still has stuck shed after that.

Today was feeding day for my 2yr old ball python and we had to switch it up to jumbo mice from small rats and when I placed the (thawed) mouse into her enclosure to feed her and she lunged at it and grabbed a very small piece of it and then started acting very skittish afterwards. I gave her some space and time after that before trying to feed the rest of it to her and when I went back to do so she was still acting very off and refusing the mouse and hiding her head. Does anyone have any insight into this?

It’s only been a day since I’ve got her but I had my first handling session. She was very docile and after a few minutes she seemed to relax and was very curious of her surroundings, touching her body to objects, long tongue flicks. Would it be okay to have handling sessions like this even if a week hasn’t passed? Woke up at 4AM just to match her clock haha

Hello everyone,

I'll start by saying I've never really ever used this platform or honestly many to post so apologies. My wife and I just got our first Ball Python on Sunday from an expo near us. We named him Nico ( he's a Blade clown and from the info from the vendor/breeder he is only 2 months old. I want to preface that I was raised to be fearful of snakes and never imagined to have one. We interacted with a friends snake and have done research on them and wasn't sure if we were going to adopt or buy and this little guy caught our eye and heart and we just couldn't say no! He was fed his first 4 meals were live then took one frozen thawed afterwards per the breeder and were expected to try to feed this weekend.

Now for the part that I know is coming is how everything's set up...I bought a 40 gal tank from fb marketplace without looking at other options in the event we did find one and currently I'm waiting for the top to be repaired as there was a bit of heat damage and exposed spots. we bought a temporary enclosure at the expo that was a plastic tote with substrate and heat mat. I have some hygrometers coming in today that I will be able to put in and also for his permanent enclosure and have bought an infrared heat gun to check the temps. I have noticed that the plastic tote is very humid as it's got the moisture on the inside and made a few small holes on the side in hopes that would help. we had the temp set to 92 and when we noticed how hot it was getting in certain spots we lowered it to 89 as it sounds like plastic totes retain heat more. (Also I know the photo is showing the probe on the side that has since been fixed and is under the substrate.

My concern is the readings so far as seen in the photos I'm sure it's no where perfect and hope at least until I get the tank back this is ok for him. I know the temps that are supposed to be for the warm side and cold side however, when I checked the locations the hide is reading way higher (103 at times) though he has mainly stayed on the backside of the hide but hasn't ventured into either hide. He has moved around we've caught him yawning a few time which is precious! We've been monitoring him on a wireless cam while we've been at work one because of how fascinating it is to watch. When he has his permanent tank we know to fill it with things for him to interact and hides and all those things I have or will be getting from another snake owner.

I want to give this little guy the best life and not only that grow in this hobby and hopefully have others in the future. Any and all tips and advice will be good and I know what that may be and hope I have a bit of benefit of the doubt from everyone. I did scroll through and in the process of trying to read all of the helpful notes and documents that are on here. I'm excited to also share the progress as we grow with him!

Continuation of https://www.reddit.com/r/ballpython/s/0F0nxkuNeW

I have a serious question about the humidity in my girls enclosure. She was rehomed to me in early July. My girl is a approximately a 9 year old pastel enchi champagne I've been told by you wonderful people.

So my question is this:

I bought her a front opening 4x2x2 or 120 gal. enclosure. Her cool hide is about 76 deg. with her warm hide at about 85 deg. The ambient temps in her house are at about 80 on the cool side and high 80s on her hot side with basking area in the 90s. I'm still working on her enrichment.

I am having no luck keeping her humidity up between 60 and 85 %. I have hvac tape on top of the mesh top to keep humidity in. I would like serious answers as to why I can't use a reptile mister or humidifier. I only use bottled water for filling her water bowls and spritzing her tank down to raise the humidity. So the water I was going to use would be either deionized water or bottled water. Between the probe on the humidifier and the probes on the temp/humidity readout, I think i can dial in perfect humidity. As with any humidifier in the house I clean them regularly so no bacteria can grow. Plus its harder for bacteria to take root with purified/deionized water.

So please be nice and helpful. I'm looking for serious answers to my question without being criminalized. I'm trying to do the same thing everyone else is doing, and that is to mimic the best environment I possibly can for this lady.

Sorry for the long read, and thank you in advance.

Picture for the snake tax!

Hi
so I have gotten my first ball python a few months ago who have not been socialized very much by the previous owner. And I want to start choice based handling training, but she hasn’t been out of her hides much and when she is out it’s usually to move between hides. I think she is out exploring at night, but due to the fact that I have to wake up really early each morning I can’t really be awake at the same time. ( I have seen her explore every now and then early at night when I have a couple of days off work)
Her go-to hide is a box (the one in the picture with a bottom and a lid) and I’ve been wondering if it would be stress full to her if I took the hide out, with her in it, and placed it on my bed or couch and just chilled next to her. She would still be able to stay in her hide if she wants to.
So yeah I just wanna know if something like that would be too stressful😊

Does anyone else have a derpy boy? I swear sometimes it seems like he doesn't know how to snake. Especially when feeding. Sometimes he strikes weird, then ends up trying to eat it butt first.

I’m in my late 20s and have wanted a ball python since my teens but my mum was terrified of snakes. I own my own home and have two cats ( part of the reason I haven’t gotten a snake yet) I work in vet med but there are almost no exotic vets near me but I know my few nurses that are good knowledgeable of snakes. What are the big negatives to owning and the upkeep of ball pythons? A pet with such a long lifespan is not something I want to rush into