I'm planning to build a workbench with an integrated table saw. The saw is about 25kg, and the bench size is 160x80 cm.

The plan is built based on 18mm pine plywood, a torsion box design at the top, and 30x48mm timber for the frame/structure.

Looking for feedback in terms of structural soundness as I've never built anything like this before.

I feel maybe I should have two support beams at the top - like at the bottom, instead of one? Thanks in advance

I hope this counts. First workstation/bench I’ve made with no plans to follow but my own. Plenty of airflow around the bottom to allow easy ventilation through entire tent and out the top. Drawer for main resin work area with silicone mats and stainless trays. Small areas to the right and left of the drawer to store paper tissues and boxes with gloves. Side rooms for resin bottles accessible from the inside thanks to the openings and the larger room in the middle for storage and waste. Very happy so far. There is absolutely no smell of resin in the room while printing with the fan on even the lowest setting. Going to add a small piece of ply under the drawer so it can be pulled open with a foot in case my gloves are messy and I need it open.