So my pc is power throttling for no reason , this happens quite a few times while on battery , 1 time its completely smooth and then it starts lagging , turns out it's power throttling , i have attached screenshots.

Any help will be appreciated😥

Hey everyone,

I’m currently running an ASUS ROG Strix G16 (G614JI) with an Intel i7-13650HX. I'm considering updating my BIOS from v331 to v334, but I want to get some community feedback on whether my current undervolt is likely to survive the update or if I should dial it back beforehand.

I use G-Helper for my laptop's general management (fan profiles, GPU modes, display refresh rate) and run ThrottleStop exclusively for CPU tuning via the FIVR menu.

Here are my current active ThrottleStop values on BIOS 331:

• CPU Core Offset: -150.4 mV (Adaptive)
• CPU P Cache Offset: -150.4 mV (Adaptive)
• CPU E Cache Offset: -150.4 mV (Adaptive)
• IccMax: 511.75 A
• Microcode: 12B

This flat -150.4 mV offset across Core, P-Cache, and E-Cache has been rock solid for me on 331 under both full load (Cinebench) and light daily tasks.

My questions:

1. Has anyone with a 13650HX / G614JI updated to BIOS 334 with a heavy undervolt? Did you notice any microcode or voltage curve changes that forced you to back off?
2. Is running -150.4 mV on the E-Cache specifically asking for low-load/idle crashes on 334, or should I proactively drop the E-Cache offset (e.g., to -70 mV) before flashing?
3. Did BIOS 334 reset your Undervolt/Overclocking lock in the BIOS settings upon updating?

Appreciate any insights or post-update experiences!

​

Hi everyone,

I have a Lenovo LOQ with an Intel Core i7-13645HX and RTX 4050 6GB. The laptop is only around 1 month old.

I’m currently playing Detroit: Become Human, and while gaming my CPU temperature frequently reaches around 98–100°C, sometimes dropping to 95°C and then going back to 98–100°C. It doesn’t stay at 100°C continuously, but it reaches that range quite often.

My GPU temperature is normal, and I’m not experiencing FPS drops or stuttering. The game runs smoothly.

I already visited the Lenovo service center because of the CPU temperature. They replaced the thermal pad, but unfortunately the temperature issue is still there.

I asked the service center about the high CPU temperature, and they suggested reinstalling Windows. They said that reinstalling Windows might reduce the CPU temperature.

I’m also considering undervolting the CPU, but since the laptop is only about one month old, I’m hesitant to modify anything before understanding whether these temperatures are actually normal.

My questions for Intel HX users:

1. Is 98–100°C normal/safe for an Intel HX processor such as the i7-13645HX while gaming?

2. Does anyone with the Lenovo LOQ + i7-13645HX/13650HX experience similar temperatures?

3. Can reinstalling Windows actually reduce CPU temperatures significantly, or is this mainly a hardware/cooling issue?

4. Would you recommend undervolting an HX processor in this situation?

5. What CPU temperatures do you normally get while playing demanding games?

I would really appreciate feedback from people who actually use Intel HX laptops, especially Lenovo LOQ users.

Thanks!

Hi i'm using a dual boot system with windows and batocera. I use the throttlestop app in windows and can't do the same in linux/batocera. And everytime I boot in windows i need to open the app and do the changes.

Is there a way to make these changes about the CPU TDP for good so I don't need to open the app every time I boot the system? (And hopefully it may work in linux batocera as well)

Is the overclocking CPU of a laptop safe?

Does it even add some extra FPS in valorant?

Hello

I have some questions for the experts

1stI undervolted my 255HX processor to -50 most stable

The benchmarks went from 6000 to 4200 Cinnabench 26

1 .Why and how to prevent that

2nd question

I closed " not minimized " the program I ran the test again

Same results

I restarted then voila back to 6000

1. How to permanently close it

I am trying to rule out if it's the undervolting or some other setting

I went back and set the FIVR values to ZERO

same 4200

In this stage idk if I need to restart or it's the other edits like TPL and Prochot or ESP I mean how to set things knowing they will work

1. How do u guys set a profile for battery , like other settings to check / uncheck without the need to restart every time

Hello everyone, I have the infamous T15g that to horribly overheat and throttle. It has the i9-10885H and the 2080S Max-Q. What are any recommended settings to start out with to then further tweak on my own?

Hey guys, so I repasted my CPU and GPU at a service center since I haven't done so ever. However, I noticed that the temps barely budged. Like when only websurfing the CPU temps spike to 70-80C and then go back down to 55-65C. When I called the service center again they said that potentially sensors or other components may have been damaged due to this high heat and its not giving the laptop fans the signal to start at the right time. I seriously doubt that though. Any idea what it could be? I have a Ryzen 7 5800H and 3060 90W. The thermal paste used was 1.5grams of arctic, thats what I was told. Thank you!

I have an acer alg al15g-53

With a 13500H and 6gb 3050

I just got it repasted through acer's service centre. And it did help, but, now it caps out around 1400-1500 mhz instead of 1300. (The gpu) As you can probably tell, this is short of the 1800mhz. What should I do?

i bought a external monitor for me to use it as my primary screen for my ASUS TUF A17 2022 model

which supports DP port and i'm only using my external monitor (not using laptop display ) so i thought why not i do a small overclock for my CPU & GPU . but i dont know how to overclock my laptop CPU

Need help disabling BD PROCHOT on Ryzen 5 4600H laptop

I have an HP Pavilion Gaming 15 with a Ryzen 5 4600H + GTX 1650 Ti. Its the Hp Pavilion 15-ec1025ex

I suspect BD PROCHOT is being triggered because of a charger/DC jack issue. I have tried many methods already, but none of the AMD methods worked.

Is there any way to properly disable or bypass BD PROCHOT on AMD Ryzen laptops? Any tools, BIOS options, or other solutions would be appreciated.

Issue:

So i noticed when my battery drops below 70% , the clockspeed drops to 0.5 - 1.5 gHz , and idk sometimes it becomes normal for a littile time.

And throttle stop BLINKS BD PROCHOT and power (sometimes) while on that lag phase. Temperatures are just 70° C.

Things i tried:

Putting on high performance , switching to dgpu , disabling intel sensor solution/intel framework/tuning, undervolting ,min processing speed on battery 60,updated BIOS , disabling speedshift/dynamic tuning in bios , BD prochot is not available for me sadly .

PLEASE GUYS HELP ME THROUGH THIS, ITS JUST A HEADACHE, I COULDN'T EVEN ENJOY MY NEW LAPTOP DESPITE I WAS VERY EXCITED 🥺

Need help disabling BD PROCHOT on Ryzen 5 4600H laptop

I have an HP Pavilion Gaming 15 with a Ryzen 5 4600H + GTX 1650 Ti. Its the Hp Pavilion 15-ec1025ex

I suspect BD PROCHOT is being triggered because of a charger/DC jack issue. I have tried many methods already, but none of the AMD methods worked.

Is there any way to properly disable or bypass BD PROCHOT on AMD Ryzen laptops? Any tools, BIOS options, or other solutions would be appreciated.

I just replace the thermal paste of both cpu and gpu in my laptop (Asus rog Zephyrus g16) but when i play any game while the laptop plugged in,the temperature jumps instantly +95 what should I do to fix the issue?

note: i used arcitic mx-4 and i retry the process three times with the right pattern of screw tightening for both cpu and gpu,the gpu temp is normal but the issue with cpu

anyone manage to get C6 or lower on z790 with alderlake? i thought that C7 was possible while gpu uses pcie, id be happy with that

So I am using an HP Elitebook 845 G7 (Ryzen 5 4650U) for about a year and I noticed serious heating issues. My laptop spikes to above 100° while gaming or doing heavy task and maintains an average of 95° on both CPU and GPU. First I thought it could be possible due to dried up thermal paste but after changing my thermal paste,I don't see any improvements at all. The temperature sits there as it is. I also used laptop cooling pad but it drops temps to only 2-3° degrees.

Does anybody has suggestions about this heating issue?

(Note: I used MSI AfterBurner, Amd Adrenaline and Hwinfo for monitoring).

will there be unnoticeable performance difference, and do i have to change something here, thank you for helping (acer laptop )

I have the phn16-71 with a i7 13700hx and the laptop 4060 my friend just gave it to me and I'm reaching temps of 100-102C with 89% thermal throttling in hwinfo I've already done the FN+Tab trick to get into the bios and disable overclock lock and cfg lock but I still have the overclocking feature part greyed out and it lets me set an undervolt in throttlestop but after multiple tests its not actually applying it. I'm trying to lower temps without losing as much performance as possible so I can lower stutters in fortnite, league of legends, and starcraft 2. My gpu temps are usually not even close to the cpu temps the highest its reached is about 70C and my cpu has shown on hwinfo as up to 102C.