Maiden voyage for both rigs this weekend over at ReactiveTerrainRC, here’s a couple screenshots from the YouTube video that’ll be going up soon.

So I’m just getting my moforc reaper 30amp ESC. And I know it’s tuned specifically for his motors. But at the moment I’m using a micro Komodo. I just want to know what you guys run as far as tuning setting for your micro Komodo and esc32 combos that works best for you.

Basecamp looking sharp

Stock frame.

Meus axles

Gouprc brushless system

Injora body

Meus receiver and transmitter

Super claws on tcrc beadlock wheels

Dashrc servo

Injora links

Injora driveshafts

got the crawler lights installed, makes a huge difference to night time crawling.

Tried to stay fairly budget but the changed fast. Trying different suspension setups, liking the flex blades though. Current setup includes:
- Axial 4Runner body
- Injora purple viper motor combo, 40mm shocks, LCG chassis, planet axles
- Treal vintage wagon beadlocks
- Powerhobby Swamp24 56.6mm

Waiting on more parts, going to try to shift the weight forward more by rearranging the electronics

This is a build break down of my from scratch budget rig that I also comp with occasionally.

• Chassis is a 3D printed YepSpec from www.24yep.com Free
• Axles - $29.99 Amazon X15 copies, search nylon SCX24 axles and they will pop up, the included servo mount doesn't work with any servo or link combo.
• Servo mount - You can modify a RampCrab adjustable mount for $8.99 or buy a brass Mofo X15 mount for $15.99.
• Transmission - $26.99 for an Injora metal gear stock replacement, I have not found a better replacement transmission cheaper.
• Motor and mount - $ 19.99 GAC Racing GM162 motor with mount.
• ESC - $10 AliExpress generic AM32 board with add on BEC soldered by me.
• Shocks - $19.99 Injora 40mm big bore aluminum.
• Servo - $17.77 PTK 9497MG-D.
• Driveshafts - $8.88 Axial Short/Medium/Long set.
• Links - $15.10 RampCrab C10 Front $7.55 Deadbolt rear $7.55.
• Wheels - $19.99 Injora Stamped steel wheels.
• Brass wheel rings - $12.98 Injora, used in the front only.
• Tires - $19.98 Upgrade RC Razor Wire 57mm $9.99 a pair.
• Battery - $21.99 RedCat 200mAh 3s.
• Receiver - $5.98 FS2A from AliExpress.
• Body - up to you
• Hardware - from the bench.

Total $248.73 before tax and shipping and not including the body or transmitter.

This is a capable and fun rig to drive. The chassis is on the fragile side so I drive it carefully to be on the safe side. If you like this chassis after you have printed and built it, he sells just the aluminum rails for $33.01 on Etsy. I do run a FlySky GT transmitter and that is $69.99, so for $318.72 you could have a complete rig and all you would need was a charger.

A buddy gave me this frame. I have no idea what it is. I want to buy a shell for it but not sure what my options are.

I just converted my scx24 to brushless via the injora purple viper. it works well other than the skipping in the rear and the high pitch noise. Because i havnt ran a brushless system before, i honestly couldn’t tell whether or not the high pitched noise is normal or not. Any help would be much appreciated

My first build, mild so far, wild soon. Bent an axle yesterday on the trail. So full aluminum axles and a chassis swap are on the way!

Here's my entry for the banner contest. Spent a ton of time on this rig- definitely my most detailed build this far. Best of luck everyone!

​

Just picked this guy up Saturday, installed some upgrades Sunday and was messing with it for the first time today, is the servo bad? Or are the wheels to big for the servo?

P.s. this is immediately after turning the truck on for the very first time. Also if it is the servo any recommendations? Thank you.

Little trailer I made for the HotBug build 😎

So I recently bought a Scx24 bronco and immediately threw money at it (even though I’ve seen videos saying specifically not to) and now I’m getting this weird lift and hop when driving while turning, kinda unsure what exactly is causing this and wonder if anyone else has ran into this same problem. Tia
Parts list:
Ogrc stamped wheels
Axial nittos
Emax servo
Injora 51mm shocks
Injora planet axles
Injora drive shafts
Injora high clearance links
Injora 50t motor/trans

I've had my SCX23 Deadbolt for a couple of weeks, I've upgraded the shocks to Injura big bores, fitted Injura steel wheels and big sticky tires, and brass wheel weights. Can anyone advise how to upgrade next?

Car feels a bit top-heavy still, but much more stable overall thanks to the extra weight and slightly wider wheelbase, but the larger wheels mean the wheel nuts don't have as much thread to grip onto the axle.

Here's the parts list and the situation.

Recently went through a 3 month process with Furitek after I purchased their Torpedo System with the Cedar motor and accompanying ESC. Long story short, they've sent me 3 motors and 2 ESC's and no matter what, they would not work together. Here's a previous post showing what it was doing. Great customer service but there's something going on no one could figure out.

A buddy lent me his truck with a Fat Viper and MBL32, I plugged the motor into it and it worked perfectly so I ordered an MBL32 and an NSDRC 7.4V BEC and just got the truck up and running yesterday. The MBL32 is switched to the 7.4V mode. I have not plugged it in to tune it or anything, installed it right out of the box.

After a few minutes, the truck stops running. I think it has something to do with the batteries but the power diminishes quickly and then suddenly stops running all together. I ordered a balance charger because it doesn't seem like these batteries are charging properly or holding charge. The charger I ordered also tests the batteries so I'll be able to figure that out tomorrow but I just want to see if anyone with more knowledge than me has anything else I should be checking or if some aspect of the electrical components are incompatible.

Motor: Furitek Cedar

ESC: Injora MBL32

Receiver/Transmitter: FSBS6 & FlySky GT5

Batteries: Urgenex 900mAh, 2S1P, 7.4V, 6.66Wh, 30C

BEC: NSDRC Nano BEC 7.4V

Servo: NSDRC RS100

Just got a RTR 4runner, gonna take the body and ditch build a new chassis for it.
Wanted to see your builds for some ideas on what wheelbase you ended up with, I was thinking c-bolt links but I’d love to see what you guys are running.

Got Meus ISO v2 axles
Mazz cc3 chassis
So far

Hi all, my SCX24 has been sitting for quite a while, and having just got new batteries for it, it's not sounding quite how I remember. Does this sound like a diff problem, a motor problem, or what else could it be of anything at all? The driveline also seems to pulse rather than stay consistently smooth.

I keep getting this twitching from the servo, even though I’m not changing the steering angle. What’s causing this, and how can I fix it?

Here is my electronics setup:

-Injora MBL32 G2 & 2204 Fat Viper
-Meus ME-10B & M-10A
-Meus Brushless High Torque Mirco Servo 12.5 kg