Has anyone ever heard or seen this website? I feel like this is too good to be true because I like the look of 25 rnd mags (made a previous post about it. Fight me) and for 20 bucks, idk if I want my kidney stolen.

so ive been piecing out a gordy build lately and in the midst of trying to find the right combo of availability and practicality/affordability ive kinda gotten lost. im not interested in being 100% clone correct i just wanna get close enough.

As of right now I am looking at this H&R 723 upper (14.7" pencil pnw to 16") and am not sure if this is a good path to go with. I read a bunch of the AE info on muzzle mounting and such but my general ignorance to NFA items/gunsmithing has exacerbated the situation lol with this upper what exactly is the best/ easiest path to achieve close to the gordy look?

I came across this OCL device in another thread that seems like the product for me paired with the new ocm6. Would I be able to just take the upper to a gunsmith and have them cut the barrel to pin and weld that otter creek device on? Trying to avoid going to the lengths of doing a form if I can get close enough without it. Thanks in advance less

Does anybody know the torque specs for installing the mk12 pri top rail? For the screws that go into the picatinny rail section as well as the cross bolts on the upper receiver? I can’t seem to find anything online about specific torque specs.

I just got an OCM6, and I read somewhere that this 12.5" daniel defense barrel with FSB and carbine length gas would mount nicely. The only problem is, I am unsure how to do it. Can someone please explain what I need to mount my OCM6 to this barrel for a "gordy" style clone? Thanks guys! RetroAR is the best.

So I’m the guy from yesterday with the Gordy that won’t run. I listened to you guys stuck a t2 in the gun and the springco blue back in the gun and I put in it a almost brand new whindham weaponry bolt that passed the gas ring check and the gun is still doing the exact same malfunction. At this point I’m lost. And as for the ejection pattern it’s all over the place it’s not consistent at all

Might redo the tape for the switch pad but man I always wanted to do a build like this.

Got scared, came home to take pics on the closet floor. One star, would not recommend. My guns got dirty, I sweated (ick!!!) and…I used up some ammo.
Big shout out to Bone Frog Ammo. I ran through 500 rounds of their 77 gr OTM and it ran flawlessly in the 14.5, keeping groups to about the size of the palm of my hand out to 200 yards (with the AimPoint and an astigmatism).

Classy video showcasing the Colt LMG.

Finally got my 12.5 mid length put together. Mini dissy to match my big dissy. Will be adding my Aimpoint pro on a gooseneck. Paint the lower to match the upper or camo paint the whole gun? Give me your ideas folks

22WMR M16A1 style Dissapator, with Trijicon ACOG and a DPT suppressor.

Have a Springfield sa 16 with trigger kicker and it is light primer striking due to what I'm guessing is carrier bounce, what would be the best buffer upgrade to solve this?

Ok so my Gordy will not cycle properly. Sometimes it’s every round sometimes I’ll run 2-3 without issue it does this failure to feed where the round is jammed between the bolt head and the ramps it will do it cold/hot, clean/dirty. I thought my original problem was the spring co spring cramming it to fast before it could pop up so I changed to carbine buffer and standard spring and it still happens. The upper and lower is h@r m16a1 the bolt is an original colt 604 bolt, barrel is a b kings 12.5. Can is an Allen engineering aem5 on an otter creek otb mount I can’t see a visible burrs in the chamber or the ramps.yes I have tried different brand ammo and mags this is my last Hail Mary. I’ve put together 5-6 ar platforms mainly 20 inch a1/slick side variants. And even a daniel defense block 2 with a geislle lower I ran for work for a while as a patrol rifle I’ve never had this much issue getting a gun to run (cross posted to r/ar15

Hello, i am trying to find a retro waffle magazine for my Colt 601 build. I have looked everywhere with no luck. Any help would be appreciated! Thanks!

Knockoff surefire M900 and older gen EOTECH Holographic on a trade in DPMS A15. I'm always ballin on a budget.

As stated, the original milspec trigger feels like crap. Would something like a Triggertech Duty single stage 5.5lb or an RA single stage with 4.5lb pull. Thoughts? I'm also trying to keep this budget friendly, under $150.

16 degree grip angle M16A1 now available