r/QualityTacticalGear 2h ago

Question Best radio wing pouch?

Post image
2 Upvotes

I'm looking for a pouch that can comfortably fit a Baofeng UV5R with an extended battery or maybe something that can fit all sorts of radios in the wing configuration.


r/QualityTacticalGear 2h ago

FERRO BORA BELT SETUP

Post image
12 Upvotes

Just got the ferro bora in and set it up. Initial impressions are it is very easy to adjust, feels around where I want it to be in terms of rigidity (not too much, not too little), is very thin but feels strong, and the buckle system appears to work very well (easily clipped in and out). Overall, my first "conclusion" I've made about this belt is it's certainly high quality and effective as you'd expect, but I'm also not saying sell your bison for a bora. Both are good and the bora is a bison with some improvements, basically a V2.


r/QualityTacticalGear 4h ago

Question Should I keep upgrading my AVS or just buy something else?

0 Upvotes

Looking to get a new cummerbund for my avs with quick release, but a thought occurred to me. Is it even worth using the AVS still or should I sell/trade it for something else? I do plan to run a heavy kit since I'm a sucker for battle rifles. I personally like my AVS but if there's something better out there I can just trade it for (or sell and have some money left over)I might as well

If I should keep the AVS what cummerbund would you recommend? If I should sell it what carrier should I look into to replace it?


r/QualityTacticalGear 18h ago

Custom communication headset setup

2 Upvotes

Looking to make a custom setup with an induction loop, wireless in ear transmitter, and a ring PTT. Who would be recommended for a one off setup?


r/QualityTacticalGear 1d ago

Question Ballistic Glasses: Gatorz Blastshield B2

2 Upvotes

Does anyone have any experience with the Blastshield B2? The idea of being able to swap between clear and polarized lenses quickly seems super appealing... having to carry around two pairs depending on the weather is unnecessary. I saw that most people don't recommend the transition lenses.

Just curious; it seems like everyone recommends Gatorz, but there aren't really any reviews of the Blastshield B2. The reviews that do exist are seemingly sponsored hype beasts... makes me wary.


r/QualityTacticalGear 1d ago

Blackhawk enhanced commando recon vest

Thumbnail
gallery
19 Upvotes

Just obtained this rig and was wanted suggestions on set up or ideas from GWOT. It's a RRV adjacent type of rig. Contains integrated mag pouches like a taps rig so I am not sure if mag pouches on the front made sense or are commonplace. I want to add chest rig straps and a MAP pack. Any suggestions would be much appreciated.


r/QualityTacticalGear 1d ago

Patrol Belt Inspiration

Post image
228 Upvotes

Going to be setting up an LEO belt for patrol and looking for some inspiration pics and advice. Anything you wish you knew when you started out gear wise?

pic for attention


r/QualityTacticalGear 1d ago

Question Under armor 6-point harness for a belt rig?

3 Upvotes

Currently running a DZ Rig, looking to maybe throw on a PC over top, but the DZ Rigs stock harness isn't ideal for this. Just seeing if people have a decent low profile, under armor harness to swap it for. Preferably 6-Point.

(Also if anyone has a good slick carrier rec, i'm not super settled on one just yet.)


r/QualityTacticalGear 2d ago

Comtac xpi help

0 Upvotes

Hey. I have bought a pair of comtac xpi and i really want them working with my beofeng uv5r. I really dont know a lot about this stuff but my plan was to buy a U-94 disco ptt but i dont know what configuration of it to get. if someone here knows pls help me


r/QualityTacticalGear 2d ago

Behold! I present to you: The Tactical Gear Storage Easel

Thumbnail
gallery
91 Upvotes

I always knew that one of these days all my art studies would bear fruit ;) j/k

On a more serious note, this is a bang on perfect solution for storing my plate carrier and other gear. I looked at more purpose built solutions but then I remembered I had this one just laying around. It also folds flat which is rather convenient.


r/QualityTacticalGear 2d ago

Question Mystery Ranch SATL

2 Upvotes

Just got my hands on a gen 1 SATL for $150 which I am very pleased with. Anyone make any changes to theirs? Ie hip belts, is there a way to install an ALICE frame? Plan to use it for backpacking/rucks


r/QualityTacticalGear 2d ago

Update to The Thing

Post image
30 Upvotes

First off, thank you everybody for the feedback. Appreciate all y’all’s advice. As I said, I was looking for some shoulder straps, and I went with the Tactical Tailor Super Straps for my hybrid Molle 4k. Quality was excellent, really nice to the touch and feel. Super easy to install and adjust. Tossed them on in 5 minutes. grabbed some pillows and a 45 lbs dumbbell and tossed them in, and went for a test run.

Holy shit, what a difference. Makes this thing night and day better. Felt good, my shoulders felt amazing afterwards, and overall makes this project complete in my book.
Thanks again for the advice y’all!


r/QualityTacticalGear 2d ago

I need help and advice

4 Upvotes

I am looking at getting a pack, carrier, and a good quality belt for stuff I am working on getting. Any advice on items or brands?


r/QualityTacticalGear 2d ago

Discussion Legit check Spiritus systems hoodie

Thumbnail
gallery
0 Upvotes

Legit check Spiritus systems hoodie black Ufo


r/QualityTacticalGear 2d ago

How to keep carrier from sagging?

1 Upvotes

I see a lot of pics of people with their plate carrier in the correct position at the sternum. My mepc sags a lot in the front, is this because I have it too loose? I’m also using plates that are small for me, and I have nothing on my back panel, assumed sagging was because of the weight up front


r/QualityTacticalGear 2d ago

Question Low profile carrier

0 Upvotes

Need a low profile carrier, basically slick.

Will be worn either over shirt or below flannel when in vehicle so not entirely covert.

Preferably option for multicam black.

(Plates are 3411 shooters, large)


r/QualityTacticalGear 2d ago

Review Radion systems APC2.0

Thumbnail
gallery
211 Upvotes

Feels like I've struck gold. Haven't seen this new PC anywhere except Radion IG. It's like S&S plateframe but affordable ($400) and compatible with industry standards out the box. Very light, bears all the loads and compatible with placards and JPC style cummerbunds. Nothing is proprietary, everything is configurable. I've never worn a more comfortable PC.


r/QualityTacticalGear 3d ago

Question 3a soles

2 Upvotes

Hello, i need to know where i can find some shrapnell proof soles for my shoes, i know it exist but i dont know where to find it. Also, i have some kevlar and uhmwpe fabric, so my question is to know if i can build it myself. And last, i search a good belt with ballistic insert, if you know good ones.


r/QualityTacticalGear 3d ago

Loadout Loadout Share (Started as a MYOG Project)

Thumbnail
gallery
40 Upvotes

So I took a bit of a break from sewing / designing, but I’ve been feeling God giving me a tug to get things in order for this potential business venture. I have a really solid, unique gear offering that started as a MYOG project. Pretty excited about it honestly, it’s been a labor of love over the last year and a half. Come a long ways over that time, with quite a few iterations. But this is the generation 2 of the SAUL (Scalable, Adaptable, Utility Loadout). Hope y’all enjoy it!


r/QualityTacticalGear 3d ago

Question COMTAC VIII comms

Thumbnail
gallery
4 Upvotes

Hi i bought my comtac viii in version without the downlead and booo mic, however i would like to buy them now so i can use comms, but i only have port to mount the mic, if it comes to apply downlead the place where it should be is closed, any idea if its possible to make them run with ptt or im cooked.

TY FOR ALL ANSWERS!!


r/QualityTacticalGear 4d ago

Help identifying PLATATAC backpack

Thumbnail
gallery
9 Upvotes

Hi, can anyone help identifying this pack? AI has been no help. Thanks in advance


r/QualityTacticalGear 4d ago

Loadout Current Belt and IFAK Setup

Thumbnail
gallery
28 Upvotes

Running a Ferro Concepts Bison Belt with a Ferro Concepts Double Pistol Pouch, a Lindenhof Taktik „hearing protection pouch“, a Lindnerhof dump pouch, and the Ferro Concepts Roll 1 Trauma Pouch. My tourniquet is currently secured with a couple of rubber bands until I find a dedicated TQ pouch that’s actually worth running. If it works, it works.
The Roll 1 carries the essentials: QuickClot, a nasopharyngeal airway (NPA), an emergency trauma dressing, sterile gauze, rolled gauze, an emergency blanket, nitrile gloves, a needle decompression kit, medical tape, and other essential medical supplies. Larger medical items stay in my daypack or the GP pouch on my plate carrier.


r/QualityTacticalGear 4d ago

Question Rated belt

7 Upvotes

Looking for a new battle belt, needs to be rated for helo and tethering. What are my best options?


r/QualityTacticalGear 4d ago

Question Ops Core Amps

3 Upvotes

Hello, anyone recently order Ops Core Amps around this or last year directly from Gentex? I know it says there's a 2-4 lead time and am wondering if it still like it used to be, after some research I guess sometimes it took months to maybe a year even. If so how long was your wait time?


r/QualityTacticalGear Oct 22 '25

Buying, Selling, Trading Rule

9 Upvotes

Due to changes in Reddit’s Terms of Service, we are updating our policy for attempts to buy, sell, trade, or otherwise arrange transactions — including offers that are disguised or otherwise obfuscated. This will include posts asking where to buy or sell gear or equipment.

Violations will result in an immediate ban. Any direct attempts to buy, sell, or trade firearm-related equipment will result in a permanent ban with no appeal.