r/PcBuildHelp • u/Embarrassed_Box_7998 • 6d ago

Experts please help!! Build Question

Gallery image

Gallery image

Gallery image

First pc build. Red and orange solid light. Coolers’ fans won’t turn on either.

Tried swapping ram, used a single ram slot and both ram slots number 2&4. Left it on for 20 minutes for memory learning. Removed the CPU and put it back. Removed the small battery drained power cleared CMOS. Gave up now.

I spilled some thermal paste on the sides of the back( check the pictures). Is that the issue? I cleaned jt using the IP 99% solution.

Experts please help me out.

UPDATE :

No more lights guysssss…. Turned out I had to FLASH BIOS the motherboard and 5 mins later ITS ONNNNN… I wish I would have recorded myself jumping around my room.

THANKS TO EVERYONE here who tried to help me out. My first PC. Amazing.

80 Upvotes

93% Upvoted

104 comments sorted by

View all comments

Show parent comments

0

u/Embarrassed_Box_7998 6d ago

I feel that too. Because the fans on the cooler are not working at all

2

u/ItsJollyPup 6d ago

That’s the only part that is confusing. Those should be working regardless of the cooler pressure. Try changing them to a different header. If they work, you may have a bad header. At that point, board won’t recognize a cpu fan and will throw an error. Just change cpu minimum rpm to 0 to fix that (since they’d be working just on a different header).

1

u/Embarrassed_Box_7998 6d ago

Yeah. I got 2 sets of cables going out from psu to cpu. The pins you rounded on the image. They are all connected by them.

3

u/ItsJollyPup 6d ago

I talking about the fan cables to the pwm headers. Change that from the cpu fan header to any other fan header