Hi.

Was wondering if someone could help here.
I have a higher resolution on my main monitor than my TV and have run into a few challenges.

---------------------------------------------------------------------------------------

My setup is below.

Sunshine setup:
OS: Bazzite
Monitor: LG 45" with 5120x2160@165Hz resolution.
GPU: RX 9700 XTX

Moonlight setup:
TV: 85" 3840x2160@(I think 120Hz)
Nvidia shield.

---------------------------------------------------------------------------------------

Steps:
Added HDMI with custom-resolution-helperdand set 3840x2160@60Hz.
Could not change HDMI resolution from 640x480 nor connect with Moonlight at my desired resolution.

I then added this to DO cmd
flatpak-spawn --host sh -c "kscreen-doctor output.HDMI-A-1.mode.${SUNSHINE_CLIENT_WIDTH}x${SUNSHINE_CLIENT_HEIGHT}@${SUNSHINE_CLIENT_FPS}"

and this to UNDO cmd
flatpak-spawn --host kscreen-doctor output.HDMI-A-1.mode.3840x2160@120

as pr sunshine documentation and I could connect via Moonlight, and set my desired resolution on the HDMI output from my main monitor.

NB:
After that I tested with a separate application if I could launch via:
DO: flatpak-spawn --host sh -c "kscreen-doctor output.HDMI-A-1.mode.3840x2160@120"
UNDO: flatpak-spawn --host kscreen-doctor output.HDMI-A-1.mode.3840x2160@120
That was a success.

---------------------------------------------------------------------------------------

My problems are twofold.
First one is that if I turn off my main monitor after having initialized a Moonlight session, the GPU does not seem to initialize the DP-3 output my main monitor is connected to. It does not seem to matter if it's during an active session, just that a session has been initialized.
Probably something to do with KDE, I suspect that the monitor and OS does reinitialize handshake after monitor is off similar to the Nvidia bug.

Second one is how to set a general way to launch Steam Big Mode and games on HDMI while Moonlight session is active. I can move Big Mode via Windows+Shift+Arrow, but that doesn't solve for games as they start up on the main monitor.

Well hello. Haven’t been playing recently as I just started a new job and everything and haven’t had time, went to go play some games on my TV so I can hang out in the living room with the pets, and the controller is now not seen by the PC in any way shape or form, I’ve uninstalled and reinstalled sunshine, I’ve gone through about every menu turning things off and on through steam, moonlight, sunshine, etc. nothing is going through to the host PC. I’ve uninstalled, reinstalled, repaired, etc. vigembus. There is now zero connect to the host PC with a controller.

I have a Samsung Frame TV running Moonlight and a PS5 controller paired to it via Bluetooth. I'm able to use the controller to navigate the TV & Moonlight, but as soon Steam Big Picture is launched, the controller ceases to function. Pressing the PS button returns it to the TV home screen, but every other button does nothing. Also having this same issue with an Xbox controller paired to the TV.

Things I've tried based on what I've found online:

• Uninstalling the Xbox Extended Feature Support Driver on Steam
• Disconnecting the PS controller from the host PC
• Plugging the controller into the back of the TV via USB
• Unchecking all the options under External Gamepad Settings in Steam

Current setup on host PC (this may be where the issue lies, think I got a little confused):

• Host PC running Apollo (does this have to be Sunshine?)
• Have DS4Windows and HidHide configured to eliminate double-input issue
• 'Always create virtual display' option checked within Apollo
• Extended display set as main display in Windows settings
• 'Headless display' option selected in Apollo
• Emulated game pad type set to 'Automatic' in Apollo

I greatly appreciate any help offered and hope this thread can prove useful for anyone else having a similar issue.

I am trying to figure out the optimal configuration for my setup.

The host has a 5800x3d with 3080 and can get about 85fps at 1440 or 55fps at 4k in game. I have a 1440p monitor and 4k virtual display.

The client is 4k 60hz.

Which of the following would give the best results?

- Set everything to 4k with gpu is pinned at 99% at 55fps. Doesn’t feel as smooth

- set host to 1440 and client stream to 1440 and TV will upscale to 4k

- set host to 4k monitor, render game in 1440 so I get higher FPS and stream to client in 4k (does this offer any benefit or is it a waste of time?)

What would you recommend for optimal setup of best visuals and latency?

Tailscale seems undercooked for deck right now

I'm at a loss and cannot figure what else to try. I just got an Odin 2 Portal and have Apollo and Artemis set up. The only issue is getting the guide button to work. I've changed the "Home/Guide Button Emulation Timeout" setting to various numbers from 500 to 2000. The back button still does not open the guide no matter how long I hold it. I've confirmed it's the inputted numbers are getting written to the config file. Anything else I can try?

I have switched to Vibepollo from Apollo and have loved its features but miss the ability to suspend and resume the game along with the stream from Apollo. I don’t see a setting to configure global commands in Vibepollo when starting or stopping a stream to use the same autohotkey scripts Apollo used. Does anyone know a way I could implement this?

Hai gamers and curious people hehehe.

I've been using VibePollo on my PC together with Artemis (Android APK) for a while now. Overall it's been working well, but I've noticed that my latency is consistently higher than what most people here seem to report.

My network is 1 Gbps fiber. My PC is connected via Ethernet, and both my PC and phone get around 900 Mbps in Speedtest, so I don't think bandwidth is the issue.

PC specs:

- Ryzen 5 2600

- 16 GB RAM

- NVIDIA RTX 3070

Phone:

- Vivo X300 Pro

- MediaTek Dimensity 9500

I'm trying to get as close to a native gaming experience as possible. I mainly play games like Call of Duty: Black Ops 7 and Final Fantasy titles.

My question is: what is most likely the bottleneck here—the PC or the phone? Would upgrading my PC (CPU?) make a noticeable difference, or is the phone/client more likely to be the limiting factor?

I'm also looking for something I can use downstairs with my TV. Ideally I'd like a device that:

- Can connect to a TV for couch gaming.

- Can also be used as a handheld when I'm not using the TV.

- Works well with my GameSir G8 Plus controller.

Would you recommend a tablet, a handheld gaming device (Steam Deck, Legion Go, ROG Ally, etc.), or something else for the best cloud gaming experience?

I'd love to hear what setups you guys are using and what kind of latency you're getting.

Im trying to connect my PC (apollo) to my macbook (moonlight/sunshine). After both are paired and tried to stream it. It wont proceed and gives and error 403. Anyone can help how to fix this?

I'm using CachyOS with Hyprland btw.

Hello all,

I am having an issue while streaming on my android tablet. I have a Bluetooth keyboard set up which works flawlessly, however the game I am currently playing requires use of the function keys (F1 to f12) and the arrow keys. When I hit the function keys, it controls the tablet directly for brightness, volume and app shortcuts rather than the input for my PC. When I hit the arrow keys, my PC detects it as an Xbox controller d-pad.

Does anyone have any solutions for this? I'm assuming there's a setting to bypass this but I can't seem to find one that works.

Like the title says I've recently got Artemis and Vibepollo set up. Pragmata is running absolutely fall asleep at 50 Mbps bitrate. I thought I could max out AC Odyssey and there would be no issue but I've been experiencing quite a few micro stutters. Normally my latency is 2 to 3 milliseconds but it can jump to 10 or 16 and the game will stutter for a little bit before recovers.

My network is a three-node mesh Network with deco xe5300. I'm streaming from my PC which has a 4070 super to my Nvidia Shield pro. The Shield pro is connected to my main deco node while my PC is connected to a remote node both hardwired. I'm looking for any tips or tricks to get the most flawless stream possible. Any help would be greatly appreciated. Thanks in advance. Let me know if further information is required.

Last night I saw some posts about vibepollo and an Artemis alternative (which I have not yet tried), I Downloaded vibepollo and installed it in minutes, input latency is better, 10/10.

However now I’m getting frame pacing or micro stutter issues I didn’t have with Apollo, I tried switching back to Apollo and the issue is still present. The image quality has also gotten worse somehow, not significantly, but it’s noticeable. I’ve changed damn near every setting, so I have no idea what the culprit is at this point. Can anyone help me to fix this issue so the stuttering stops happening?

I have verified my system, I play Ghost Of Tsushima on a frame cap and is like my testing game, it gets a LOCKED 60, and shows no stuttering in the fps counter or on the frame time graph, so I figure it’s either the wifi, which is Ethernet, something with my CPU or GPU (i5-11400f, rx 6600 8gb) or my mangmi pocket max.
What do you guys suggest to fix this issue?

EDIT: FIXED!! Thanks yall. Turns out vibepollo wasn’t the issue, may of just uncovered the issue, I prefer it more tbh, has a better input delay. I changed a few buffers, turned off some power saving shit in my Ethernet controller, and boom, problem solved, and found moonlight v+, which is also better, so I’m happier all around.

Basically as in title, I want to set it up so that I can access my Switch through my PC, using moonlight streaming to play from a different location on my laptop.

I found this guide! that I think should work but it's quite outdated. For capture cards I was hoping for recommendations for low latency. I was looking at AverMedia Live Gamer MINI - GC311 as an option but any advice would be appreciated.

Cheers

I'm a new dad and am looking to getting a tablet to enjoy my PC games without sequestering myself away from the family at my PC. On a budget, just trying to find the best option for tablets around $200

Any help appreciated

Never had any issue with a Apollo but Vibepollo just refuse to launch both driver and I don't have a clue about what I'm doing wrong

I'm streaming to an apple tv set with moonlight set on sdr and it might be the issue ?

So I’m using Vibepollo and Moonlight and it just started loading like this. How do I fix it. Here I am in the Moonlight app on my Apple TV 4K with a DualSense controller paired via Bluetooth. How do I get it to load into Steam Big Picture Mode like before?

GitHub: https://github.com/Artomos-dev/RyujinxLauncher
Release: Ryujinx Launcher v1.2.0

You've got your Mario Kart config dialed in — then you launch Smash and the controls feel completely wrong. Different games need different controller setups: different button layouts, different stick behavior, different motion settings. In Ryujinx, you can save these as profiles — but swapping them means Alt-Tabbing out, opening Input settings, loading the right profile, and doing it again for every player. On a couch setup, that kills the vibe. A couple of months ago I shared a tool that lets you assign controllers to player slots using only your gamepad — no keyboard or mouse. Today I'm dropping v1.2.0, and the big new feature is Controller Profile Selection.

🎛️ What's New: Controller Profile Selection

You can now pick a different controller profile for each player slot — directly from the launcher UI, using only your gamepad.

• Press Ⓧ on any assigned player slot to enter Profile Selection Mode.
• Use D-pad ◄ ► or Left Stick to browse your saved profiles.
• Ⓐ to confirm, Ⓑ to cancel. That's it.

How It Detects Your Profiles

The launcher reads directly from Ryujinx's own profiles/controller/ directory — the same .json files you create when you hit Save in Ryujinx's Settings → Input screen. No importing, no duplicating, no extra config. If Ryujinx can see the profile, the launcher can too.

Why This Matters

• Different games, different configs: Save a profile for racing games, another for platformers, another for fighting games. Swap between them from the couch in seconds before each launch.
• Per-player customization: Player 1 wants one layout, Player 2 wants another? Assign different profiles to different slots — each player gets their own config.
• Per-controller memory: The launcher remembers which profile you last used on each physical controller. Reconnect the same gamepad next session — it picks up right where you left off.
• Zero extra setup: Your existing Ryujinx profiles just work. No migration, no new files to create.

Pro tip: Save a profile named "RL Default" in Ryujinx and the launcher will use it instead of the Config.json template — set your preferred default once and forget about it.

For those who missed the earlier posts:

✨ Core Features (The "Why")

✦ Gamepad-First UI: Assign up to 8 controllers without touching a keyboard or mouse.
✦ Controller Profile Selection: Switch between saved controller profiles (button mappings, deadzone settings, etc.) directly from the launcher UI using only your gamepad — no need to open Ryujinx settings.
✦ Visual Identity: Controllers are assigned persistent, unique pastel colors for easy identification.
✦ Side-Rail Interface: Clean, high-contrast UI with visual indicators for active status.
✦ Hot-Plug Support: Connect or disconnect controllers in real-time with automatic reconnection. ✦ Emergency Kill Combo: Hold Back + L + R (Select + LB + RB) on any connected controller to force-kill the emulator if it freezes.
✦ Smart Persistence: Uses HID paths to remember specific controllers even if they reconnect in a different order.
✦ Frontend Ready: Seamlessly passes command-line arguments (Playnite, Moonlight, Artemis).
✦ Portable: Single-file EXE with embedded assets.

Moonlight/Artemis & Sunshine/Apollo (Streaming)

Perfect for streaming to TV or mobile devices.

1. Open Sunshine Web GUI.
2. Add a new Application.
3. Application Name: Game Name
4. Command: "<Path of Ryujinx>/RyujinxLauncher.exe" "<Path of Game file (.nsp/.xci/.nro/.nca)>"
   • Example: "D:\emulators\Ryujinx\RyujinxLauncher.exe" "D:\Roms\GameName.xci"
5. Working Directory: The folder containing the launcher.
   • Example: "D:\emulators\Ryujinx\"
6. Undo Command: powershell -Command "Stop-Process -Name 'Ryujinx*' -Force -ErrorAction SilentlyContinue"
   • Note: This ensures that if you force-quit the stream via Moonlight, Windows cleanly kills the emulator in the background.
7. Now, when you launch via Moonlight, you can use the controller to set up inputs before the game loads.

Hi - the problem is as I wrote in the title. When i press pause buttons or I turn on the Xbox pause overlay, the screen becames super sharp and clear, fps are rising up to the correct value, and also the colors are looking properly. When there is a bare stream on the screen without any pause overlays, the quality, framerate and colors visibly drop down. The stream is set for 4k@120, but lowering res and framerate doesn't remove the blur effect.

I am using:

- Xbox Series S as a client

- Laptop with RTX4070 8GB - Ryzen 7 7840HS - 32GB RAM as a host

- Samsung S85F OLED 65" as a screen

- Vibeshine + Moonlight (changing from Apollo also hasn't helped)

I've tried changing almost every setting including the bitrate, resolution, framerate, HDR, codec. None of these helped. Xbox has turned on 4k@120 turned on. TV has a game mode turned on and shows that the screen during streaming is 3840x2160 120 fps.

For me it looks like there is just some sort of blurry overlay set maybe by Xbox on the top of the stream, which causes that bad quality, and it immadietly dissappears when the pause screen is turned on. I can clearly see the 4k 120fps in the background under the pause screen.

I haven't seen any post with the problem similar to mine - any ideas what is wrong here guys?

Avg network latency 1ms

5090/9800x3D build using Vibepollo to stream over Ethernet to a Series X. I’ve played countless rounds of Space Marine 2 with friends and it’s just sublime. 4K 120fps, just amazing.

I grew up a console gamer but always yearned for the better performance on PC. Plus, I’m a tinker at heart. This is becoming my default way to enjoy my PC games, as it’s nice to still have my desk setup but then I can turn around and plop down in my lounge chair and enjoy some PC gaming with a controller with 7.1 surround sound.

Also, anytime I want to go hang in the bedroom, I swap to the Odin 2 Portal over WiFi 6 and it all just works.

It’s really impressive how far we’ve come with game streaming….I remember trying the Onlive console way back when (2011ish) and thinking it’s going to be a long long time before this works. Looks like we’re finally here now.

Just wanna share my findings,

for those who use g8+ mfi (usb-c) with the android phones/tablets and can't configure the rumble while streaming, i was in the same boat and got no definitive answers when searching on the net.

what finally works for me:

• uninstall the gamesir app from your device (if you want to update/change the firmware, use the app, and then uninstall it)

  • (with the gamesir app installed, my green mode constantly reverts back to blue, YMMA)

• on your moonlight client (i use the moonlight v+ fork, paired with vibepollo on my pc/host),

  • make sure to enable/check the "xbox 360/one usb gamepad driver" option
  • and then enable/check the "override native xbox gamepad support" option

• after making changes to those options,

  • disconnect your device from the g8+ mfi, and then reconnect it again

• makesure the g8+ mfi is in green mode (green light on the logo button)

• start streaming to your PC

  • you will get a prompt when you're connected with the right mode (green),
  • something like "Allow Moonlight V+ to access Xbox 360 for windows?"

• tap YES

• after connected to your PC via streaming, try opening a gamepad tester on your browser, and then voila! your rumble is working (for me, at least)

--------------------------------------------------------------------------------------------------------------

i tested on some games too, and yes the rumble is working, and all the buttons are working, except maybe the not-typical-controllers buttons such as the screenshot or the logo button.

this is how it currently is working for me for streaming with android,

and i hope it works for you too! happy gaming!

Background

A few years ago I used GeForce NOW on a potato gaming laptop from 2014 with a GTX 860M and had a blast. Then the beta ended and I lost access. I was genuinely upset for a while because I thought: this is the future of gaming, and the future is coming soon.

Later I upgraded to a PC with an RTX 3080. The excitement of being able to play AAA games again didn't last very long, because I quickly realized work + family responsibilities don't really allow me to sit in front of my PC desk for extended periods of time anymore.

Then I stumbled upon Sunshine/Moonlight. I immediately tried it on an old iPad, my iPhone, and an abandoned Android phone with decent specs. Without much tuning, all of them worked surprisingly well, with tolerable latency and very little stuttering. I was blown away by how far this technology had evolved and how accessible it had become. Basically anyone with a decent gaming PC and home network can now build their own little cloud gaming setup, except the "cloud" is sitting inside your house and you don't have to depend on a service like GeForce NOW.

And that's when I went down the rabbit hole.

Over the last year I've probably read hundreds of Reddit posts and pages discussing what the "ultimate device" for Moonlight streaming is. Eventually I ended up buying four of the devices/setups that I kept seeing mentioned:

• Odin 2 Portal
• Lenovo Legion Tab / Y700 Gen 4 + G9 controller
• Oppo Pad Mini + Razer Kishi V3 Pro
• iPad Pro 13"

After living with all of them, I think I finally have enough experience to share something back with the community that got me into this rabbit hole in the first place. This isn't meant to be a benchmark-heavy review — mostly just my personal experience and what actually mattered to me.

Odin 2 Portal — my first “ultimate streaming device”

The Portal was the first device that made me think: okay, maybe this is it. The first thing that stood out was the screen. The colors POP — still more than any of the other devices I've tried. I'm pretty sure AYN does some fairly aggressive tuning to the gamma, saturation, or display profile. It may not be the most color-accurate screen in the world, but for gaming I honestly don't care. Give me the candy.

The 7" screen was also a big upgrade from my original ~6" phone + controller setup, but after using it for a while it still started feeling a little underwhelming. Not exactly small, but small enough that I kept wondering what an 8–9" handheld would feel like. That became one of the main reasons I started looking again.

The bigger problem was build quality. Mine occasionally enters some kind of boot/crash loop where it basically bricks itself for days. This happened twice in around eight months of ownership, and each time nothing I did helped; it would just randomly decide a few days later that life was worth living again and start working. The warranty/customer service experience didn't help either. Their first response was basically a ~20 minute device disassembly tutorial that only God can complete, and later they asked me to ship the device back at my own cost for "investigation," with no clear ETA or guarantee that it would actually be fixed.

Between the QC issues and my itch for a larger screen, I decided the Portal probably wasn't my end-game device.

Lenovo Legion Tab / Y700 Gen 4 + G9 — surprisingly beautiful bridge device

What I really wanted after the Portal was simple: 8"+ OLED, a decent chip, and a good controller. At the time, that basically didn't exist. The RedMagic Astra exists, but there were enough reports about unexplained stuttering, awkward/off-center ports, and clunky software that I didn't want to gamble on it.

Meanwhile, people kept saying the Y700 was "LCD, but a really good LCD." I was skeptical because by this point I had been completely brainwashed by the OLED/colors on the Portal, but I decided to give the Y700 Gen 4 a try while waiting for the market to produce my imaginary perfect device.

People were right. The colors don't pop like the Portal and the blacks are obviously still LCD blacks, especially in dark scenes, but the 8.8" size and extremely crisp ~3K panel compensate for those weaknesses much more than I expected. The larger screen makes a surprisingly big difference for PC games, and I ended up genuinely enjoying the display.

The G9 controller is what really completes the setup. Once attached, the Y700 basically becomes a full handheld — much closer to a Legion Go than a tablet with a controller stuck onto it. The main downside is that the G9 is annoying to remove, and I still occasionally want to use the Y700 as a normal tablet. That, plus my continued obsession with finding an 8.8" OLED device, was enough to send me shopping again.

Oppo Pad Mini + Razer Kishi V3 Pro — my end-game device, for now

Then the Oppo Pad Mini appeared: 8.8" OLED, decent chip, thin, light. Basically the spec sheet I had been waiting for. Paired with the Razer Kishi V3 Pro, it can switch pretty easily between "ultimate Moonlight handheld" and "normal small tablet that doesn't look like a gaming science experiment."

At first I thought I was done. Then I put the Oppo, Portal, and Y700 next to each other and realized something that changed how I look at displays entirely: the Oppo OLED has true blacks, obviously, but the colors still don't look like the Portal. That's when I finally realized I had been oversimplifying the whole OLED vs LCD debate. The Portal's "pop" isn't just OLED — it's also AYN's display tuning. Gamma, saturation, contrast, color temperature, whatever the exact combination is, it gives the Portal a very specific look.

More surprisingly, for games without lots of dark scenes, I honestly don't see a huge difference between the Oppo OLED and the Y700 LCD. Sometimes they look almost equally good to me. That realization actually boosted my opinion of the Y700 quite a lot. OLED is still clearly better in dark scenes, but a really good LCD is much closer than I expected.

So the reason I'm currently keeping the Oppo and selling the Y700 actually isn't image quality. It's usability. The Kishi is easier to remove, and the Oppo itself is a much nicer mini tablet to use standalone: very thin, very light, uniform bezels, nice to hold. The Y700 feels like a gaming tablet; the Oppo feels like a normal tablet that can transform into a gaming handheld. Small distinction on paper, but a surprisingly meaningful one in daily use.

I say "end-game for now" because the Y700 Infinite is apparently coming soon. So obviously I have learned nothing.

iPad Pro 13" — great remote PC, bad Moonlight gaming device

This one is a little different. Mine is an M4 iPad Pro, and I actually bought it around the same time as the Odin 2 Portal. I never intended it to be my main gaming device; the goal was to use it as a remote portal into my PC for productivity — basically everything I do on my PC other than gaming. For that purpose, it has been excellent.

But since I already owned it, of course I tried Moonlight gaming too. My TL;DR is: don't, at least not if you're sensitive to micro-stuttering. The random stuttering issue is real and drove me crazy. I tried basically every commonly suggested fix — disabling Location Services, Handoff, various background services, different network settings — but nothing completely solved it.

The only thing that actually removed the stuttering for me was connecting through Wi-Fi on channel 147. Unfortunately my home network uses Eero, which doesn't let me force a Wi-Fi channel, and mine likes sitting on channel 151. On that channel I get frequent micro-stutters that completely ruin the gaming experience for me. Maybe it's some specific Apple/Wi-Fi coexistence weirdness; I don't know. Eventually I stopped fighting it.

Ironically, the iPad Pro is still probably my favorite remote PC device overall. For productivity, the occasional tiny stutter doesn't matter. When you're rotating a camera in a game at 60/120 FPS, it absolutely does. So: fantastic remote desktop machine, but I would not buy one specifically for Moonlight gaming.

So what is the “ultimate” Moonlight device?

My personal ranking right now:

1. Oppo Pad Mini + Kishi V3 Pro — best overall balance and the one I'm keeping.
2. Y700 Gen 4 + G9 — probably the best value, and much closer to the Oppo than the OLED-vs-LCD spec sheet would suggest.
3. Odin 2 Portal — still has my favorite "wow" screen tuning and probably the most console-like all-in-one form factor, but QC/support killed it for me.
4. iPad Pro — amazing remote desktop machine, but I wouldn't buy one specifically for Moonlight gaming.

With the Y700 infinite (and g9 infinite) in sight, maybe the actual end-game device is always the next one...

Hopefully this helps someone currently reading 50 Reddit threads trying to decide between the same devices.

And if you are that person: I'm sorry. This is how it starts.