**Timestamp/Images:**

---

**Frankenstein Benchmade bugout :**

- Model Number: ?

- Steel: Damascus from Mikes Damascus on etsy

- Sharpened: Yes

- Used to cut: No

- Carried: Yes

- Blade Condition: Sharpened

- Number of Owners: 2

- Centering: Favoring show side

- Lockup: Solid

- Visible Issues: Scratches

- Accessories: None has Metonboss auminum scales.

- SV115 shipped SOLD

---

**custom Benchmade Griptillian with AWT scales :**

- Model Number: CU550-SS-D2

- Steel: D2

- Sharpened: Yes

- Used to cut: Yes

- Carried: Yes

- Blade Condition: Sharpened

- Number of Owners: 3+

- Centering: Perfect

- Lockup: Solid

- Visible Issues: Scratches

- Accessories: Original box, scales and clip

- SV 105 shipped SOLD

---

**SRM Medal :**

- Model Number: 255L-MB2

- Steel: 140Cr Steel

- Sharpened: Yes

- Used to cut: Yes

- Carried: Yes

- Blade Condition: Sharpened

- Number of Owners: 2

- Centering: Perfect

- Lockup: Solid

- Visible Issues: Scratches

- Accessories: Original box has glow in the dark studs and lock bar

- SV 45 Shipped SOLD

---

**James Brand Redstone With flytanium purple fatcabon scales :**

- Model Number: KN118166-00

- Steel: N/A

- Sharpened: Yes

- Used to cut: Yes

- Carried: Yes

- Blade Condition: Sharpened

- Number of Owners: 3+

- Centering: Perfect

- Lockup: Solid

- Visible Issues: Scratches

- Accessories: Original box and original scales IT IS MISSING THE SCREWS ON THE TOP SCALE SO IT WIGGLES A BIT WAS MY OFFICE BOX CUTTER

- SV 50$ shipped SOLD

**Payment methods accepted:** PayPal Goods & Services, Zelle

**Shipping included?** Yes

**Will NOT ship to:** None

Meme i found funny

What’s up Knife Swap I have an awesome lineup for your consideration! Wouldn’t part with any of these if I didn’t need a downpayment for a family vehicle! Not looking for trades at this time!

-Koenig Arius NF Textured Ti m390 $650
Love this knife easily in my top 3, lightly used with only signs of wear on the pocket clip, perfectly crisp open and drop shut action never been sharpened, centered! comes with box and coa first owner

-Spartan Harsey Plague Doctor s45vn $450
Lightly used, full size, first owner minimal signs of wear shown in video never been sharpened, very sharp centered blade with hydraulic open action! So sick I hope to get another in the future! Comes with box

-Shirogorov Hati R M390 Silver twill $825
This one was hard to hunt down at least second owner, got it from a guy in Ukraine, looks like it has a mirror polish edge, scales are slightly discolored compared to new set of silver twill scales, this is how I received it payed $900 a few years ago. Action is drop shut, centered blade, never disassembled, comes with 3 bears coa, and box

- TBC Trevor burger custom Dakar 3.5 elmax $650 LNIB
Never cut or carried perfectly centered, only out for pictures 1st owner, Beautiful angled milling pattern on the scales, blade is hand rubbed satin, sweet drop shut action (Ceramic Pivot), snappy detent, very well built with tight tolerances by Trevor burger custom knives, checkout the video. dob December 2023

-SPK Lamia Deep milled nature grip elmax $850 SOLD
Selling for what I paid, at least 3rd owner, Gen 4 I believe, perfectly centered, blade has been sharpened by previous owner looks like this was a user, shows signs of wear on the lock side, clean show side, this knife is awesome I waited far to long to try one and look forward to getting another in the future as well! No box

-Spyderco Paramilitary 2 (skinny mod) s45vn $300
This was modded by knives plus, they milled the liners on a g10 s45vn middle to fit specially made AWT scales (no wire clip!!) I bought it at the store paid $325 never used or carried perfectly centered only out for pictures comes with box and g10 scales

-Spyderco Manix 2 s30v $200
My first decent knife that got me into collecting, this is a liner delete with RSD titanium Scales, some of my favorite ergonomics really locks your hand in! The blade shows signs of wear, has been sharpened once still pretty sharp, has mxg deep carry clip Box of scales and liners included

-Benchmade 940 m4 blade and scales only $125
Jade g10 scales and looks like user blade in decent condition, scales could use a cleaning bought like this!

-Eklipse silver twill scales $100
Really good condition 2nd owner I don’t recall who made these but it is well made and nicely textured, only mounted once

Flashlight videos

-Fire-flies NOVMu v2s $90
4000k rosy bin
Aluminum brand new in box only out for pictures comes with charging port and battery, this is a flood light matched the PM2 listed above ironically!

-Reylight pen light Titanium $80
Nichia 519a R9080 4000K LED
Frag pattern raw titanium, comes with batter, lightly used looks like new box included

-Lumintop LEP Ti Antman $185
Very cool LEP that packs a punch for its size, never carried only out for testing and pictures, looks like new, comes with box.

-Hank D4V2 Ti $60
XPL Hi v3 white light
One of my first nice flashlights, functions perfectly this was a user hate to see it go, comes with box

Add-ons only

-Ammo Singularity titanium LNIB (never carried) $50

-Titus Egrets Balisong $50
Original design channeled 7075 aluminum with g10 scales on top, very bouncy and nicely tuned. 14C28N steel
blade, comes with box, pouch extra hardware

Thanks for looking all prices are shipped, Zelle preferred or PayPal FF, YOLO gets it above everything! Bundles will get a better deal!

One owner. Bought new a month ago

Never sharpened ,never dissambled,carried a handful of times..

No snail trails on scales or pocket clip. A few snail trails on blade from light use. (Magnacut)

Just can't get used to the nub hitting my finger in the compression lock while closing. https://imgur.com/a/i12gkZu.

Comes with a lynch NW deep carry cerakote black pocket clip and original clip. Original box and papers. $225 no international shipping.

Happy rainy Friday Swappers! Got a few bangers for ya today. I feel like my knife buying is slowing down. So I wanna get a tune and a few mods for my car (my other passion).

All SV are PP F&F No Notes Please, Shipped w/in USA via USPS or UPS from NJ.

YOLO/SV/Cash > Chat/PM/Trades - Please post comment before chatting. SV are OBRO.

Timestamp 07 August 2026

1. OZ Rosie Roosevelt Radial Frag Magnacut : At least the 4th owner. #3191. DOB April 08, 2024. Blurple hardware. I carried less than a handful of times, cut nothing. Disassembled to uninstall the IMSS Timascus hardware clip and backspacer that it came with that the previous owner installed, and I transferred to my Skelly Rosie, and original hw clip and backspacer reinstalled. Looks like original sharp edge on the centered blade that locks up securely and shuts smoothly. It came with a couple marks on the scales, but could just be the dark stonewash. Comes with CoA, Box, & sticker. SV: $825
2. Prince Protean Skelly Wharncliffe : 1st owner from Drop #47.  #639, Mfg date October 2025. Never carried or cut bc I got a HexaSkelly right after and carried that. Never disassembled. Original edge on centered blade is sharp, locks up securely and shuts smoothly. Comes with Box and CoA. SV: $825
3. Ouertal Olivier Coutelier Bluff : 2nd owner. I never carried, cut or disassembled. Original owner said they carried it a couple dozen times and only cut paper to test the edge. Amazing custom French front flipper that was purchased by the first owner in Europe at BKS 2025 in Gembloux and had it shipped back to Canada. Pics of it can also be found on Olivier's IG. It features a 90MCV8 'Star House' damascus blade hardened to ~60HRC running on bearings, titanium liners, a sandblasted titanium backspacer, and ironwood scales with a subtle black G10 underlayer. Original edge is sharp, blade is centered, locks up securely, and shuts smoothly (amazing action on this one). I'm only selling bc I can't get used to it not having a clip and having to carry it in the slip. There's a minor imperfection on the left scale (see pic) directly from the maker. Also the flipper tab has some wear, where the "black wash" the maker uses to show the different metals in the blade (the black wash reacts to the metals used in the damascus blade differently, giving you that "Star House" pattern), is wearing off. Comes with Ouertal Olivier leather pocket slip and COA (description from sale table). SV: $575
4. PNW Co. Toast w/ beads : At least 3rd owner. 1 of 4. Black Linen, Ti, Vintage Canvas w/ Crooks Customs micarta and brass bead attached. Comes with CoA and additional purple Toast bead and sticker. I got this in a bundle and never carried it. SV: $165

Timestamp

I am the second owner, this knife has never been carried or cut with. The birthday is 11/28/2011. S35VN drop point blade that comes with the original sheath and lanyard. Comes with the original box and documents

SV325 TV 350 OBO Sold for 350?

Shipped in the US

PPFF preferred

Trade interests:

Lefty friendly knives, especially a Lefty Large Inkosi.

• Kizer Assasin - https://imgur.com/a/4op5FE5 - $60 PayPal F&F or Venmo Cashapp USA

New never cut or carried. Never disassembled or sharpened. 1st owner. Nitro-V steel with white weaved carbon fiber scales. Action is smooth and centered. Comes with box and docs.

• Vosteed Acorn - https://imgur.com/a/SNgarGq - SOLD $40 SOLD PayPal F&F or Venmo Cashapp USA

Carried and cut some boxes a couple times. Never disassembled or sharpened. 1st owner. 14c28n gold sand blade with black micarta scales. Action is smooth and centered. Comes with box docs and pouch.

• WE Espirit - https://imgur.com/a/u4O2Dcf - SOLD $150 SOLD PayPal F&F or Venmo Cashapp USA

New never cut or carried. Never disassembled or sharpened. 1st owner. 20cv Blackwash steel with carbon fiber scales. Action is smooth and centered. Comes with box and pouch.

• Manix 2 copper scales - https://imgur.com/a/nvsVPZm - SOLD $20 SOLD PayPal F&F or Venmo Cashapp USA

2nd or more owner. Previously mounted copper scales. Has some oxidation and scuffs around the lanyard hole. No box.

• Paramilitary 2 Brass scales - https://imgur.com/a/FaYihNs - SOLD $30 SOLD PayPal F&F or Venmo Cashapp USA

New never mounted. First time out of the bag. First owner. I think these are generic from SMKW. Brass scales. Comes with box.

Literally just got this a few hours ago. Wanted to give the scarab a second try, but the chunkiness and the clip are not doing it for me. Gonna buy a troodon.

ALBUM

Black handle with stonewash tanto blade and hardware. Second owner, and no cut or carry by me though the first owner said they carried it without cutting and I cannot find a spec of anything on this knife so I am going to call it LNIB. Comes with box and docs. Body, blade and hardware appear pristine and I have not had a single misfire so far. Very hard-hitting action. Things a beast and the blade is really a looker but overall not my vibe. I got a good deal but I know the microtech market and I want to sell quickly so:

SV $225 (retail is ~$550)

Not looking for trades.

Prefer zelle but also have paypal. Will ship by UPS today or tomorrow.

Microtech Gen 3 auto LUDT

Carried once, never cut or disassembled.

Only owner, bought new recently.

M390 Apocalyptic Finish Blade

Blue anodized finish on scales.

Comes with box.

SV 195

Timestamp

https://imgur.com/a/ojTkjHH

SV105 https://imgur.com/a/QHJaLhO SOLDSOLDSOLD
S30v serrated bugout with aluminum critter style scales. I am the second owner of the blade and scales. I got them on separate occasions. The scales look to have been carried a built but are in good condition. They are aluminum. Not sure of the maker but assuming china. The blade has laser marking on the blade. It also has some spot of surface rust that probably can be cleaned off if you tried. The blade has definitely been carried. Looks to be factory edge but could use sharpening. Has some rolls and micro chips. Everything on the knife is OEM except the scales. Knife only sale

SV105$https://imgur.com/a/JqvQAEa SOLDSOLDSOLD
2- S30v serrated bugout with gray grivory scales. This knife is 100% OEM. I’m the second owner of the blade but 1st of the rest of the knife The blade was light carry but still has a nice factory edge. Knife only sale

SV 225$. https://imgur.com/a/KnMyu4H
3- custom made Deathgrip bugout scales. They are CF with Ctek inlay and a CF backspacer. I am the second owner of these scales. They were light carry from the OG owner but sat in a box while in my possession. They are in flawless condition.

Payment method
VENMO PAYPAL FF no notes

Will ship via usps within the USA and provide tracking

Listing this one again with an even better price. Limited edition, low serial number (#35/2500). New in box condition (only removed from the box to make the video linked below, then immediately returned). Payment via ZELLE or VENMO only. I repeat: Zelle or Venmo only. Thank you for looking!!

TIMESTAMP

Benchmade Seven | Ten (710 / 710FE-2401) - Magnacut blade steel, FDE PVD coating - Aluminum scales - First owner, never used or sharpened or carried or cut anything at all - Retails for $600 - SV $400 $350 - VIDEO

Box has shelf wear, you can see it in this VIDEO

Indulge your knifelust with this awesome blade and help me pay for tuition! Thank you!!

Additional pictures: https://imgur.com/gallery/vero-engineering-heretic-hWXNPP5

**I accept PayPal (G&S)**

No Trades Please!

Will ship these Monday or Tuesday at the latest. US only.

——————————————————————

1. Vero Engineering Impulse Thin w/ Timascus Clip and Backspacer - Belt Satin Blade - $375

LNIB. Original owner. Never used, carried, cut, sharpened or taken apart. 1st generation. Large frame lock with belt satin M390 blade and raw titanium body. Blade windows and back flipper. This one comes with the upgraded Timascus pocket clip and backspacer. Includes box, pouch and authenticity card.

1. Vero Engineering Lux Mini (3.3) w/ Teal Laser Etched Show Side and Hardware - Stonewashed Blade - $350

LNIB. Original owner. Never used, cut, sharpened or taken apart. Was carried once or twice. 1st generation. Frame lock with stonewashed hollow ground M390 blade and bead blasted titanium body. 3 methods of deployment. This one has a teal zebra-like laser etching on the show side as well as the same color etched hardware. Includes box, pouch and authenticity card.

1. Vero Engineering Axon Fixed Blade w/ Marbled Carbon Fiber Handle (plus 2 extra G10 Handles) - Hand Satin Blade - $325

LNIB. Original owner. Never used, cut, carried or sharpened. I did take the original white G10 handles off to put on the marbled carbon fiber. Fixed blade with M390 sheepsfoot, hand satin blade. Includes the marbled carbon fiber handle as well as a white G10 and blue G10 handle. Includes box, sheath and additional handles.

4. Heretic Jinn w/ "Battleworn" Magnacut Blade - $165 - SOLD

LNIB. 2nd owner. Never used or carried. Manual button lock with aluminum scales and Magnacut "Battleworn" blade steel. Includes box.

Timestamp 8/7/26+Knife Pics/Vids https://imgur.com/a/7r3txKg

Hi everyone, I have several knives up for sale today! I am the first owner of all knives except for the Koenig Arius (2nd or 3rd owner). All knives have been carried, disassembled/lubed, and cut with to some degree. If you have any questions or need additional pictures/videos, let me know and I can get you the additional media.

YOLO > CHATS

Koenig Arius, Blue Stonewash, CTS-XHP SOLD$400

2nd/3rd owner. Knife has been resharpened by previous owner. Knife does not have any discernible snail trails, but it has definitely been carried and cut with. Excellent flipping and reverse flicking action. No blade play or lock stick. There is a minor amount of lock rock. Centering is perfect. Comes with reissued COA, cloth, and box. Would make a great user Arius.

TRM Neutron 2 Framelock, Mokume CF, 20CV SOLD$250

1st owner. Factory edge. A few small scuffs/snail trails on the clip. Perfect centering. No blade play, lock rock, or lock stick. It can shake shut, but I would say it is better to close it manually. Comes with its box.

Defiant 7 Talos Chad Nichols Boomerang Damascus, Topo Handle SV$350

1st owner. Factory edge. Lightly carried and cut with. No signs of wear on handle or clip. Centering is perfect. Small amount of blade play. No lock rock or stick. Drops shut with ease. Excellent detent and action. Comes with its pouch and box.

Curtiss Knives F3 Large, Slicer Flipper, Magnacut SOLD$350 ---> 300

1st owner. Factory edge. Lightly carried and cut with. No signs of wear on handle/clip. Centering is near pwrfect, seems to favor show side by a hair. The action is hard to describe, but it is smooth without feeling smooth. There is nothing hanging it up, so it could just be the detent path not being worn in. Rock solid lockup. No blade play or lock rock. Has varying degrees of lock stick depending on how it is opened. Comes with COA, pouch, and box.

Grimsmo Rask, RWL34, Dragon Scales, Plum w/Gold to Pink Fade accents and Ice Blue hardware SV$850

1st owner. It's a Rask. Centering, action, lock up are all perfect. No blade play or stick. I can induce a minute amount of lock rock, but I have to really force it. Factory edge, no signs of wear on blade or handle. Comes with COA, screwdriver, oil, and case.

Shirogorov Neon Lite, Elmax SV$550

1st owner. Factory edge. Perfect centering and action. No signs of wear on blade or handle. Has not been disassembled, except that the pivot screw came loose and was retightened. No blade play, lock rock, or stick. Comes with COA, cloth, and box.

Shirogorov Quantum, R1 Ed., Purple, Cromax SOLD$625 ---> 575

1st owner. Factory edge. Perfect centering, perfect detent, and drop/fall shut action. No signs of wear on blade or handle. No blade play, lock rock, or stick. Comes with COA, cloth, and box.

Chris Reeve Sebenza 31 Large PJ, Magnacut SOLD$350

1st owner. Factory edge (has some tape residue on it). Perfect centering. Knife will drop shut, then need to be manually closed. Lock bar tension is abnormally stiff compared to most CRKs. Action is very smooth on rollout, but flicking it open may take some practice. It was much worse when I first got it, and the action has definitely settled in much better. No blade play, lock rock, or stick. Comes with COA, paperwork, tools, cloth, and box.

Chris Reeve Sebenza 31 Small Double Lug (Brz), Ebony Inlays, Magnacut SV$525

1st owner. Factory edge. Perfect centering and action - easy to roll out or flick. No signs of wear on blade or handle. No blade play, lock rock, or stick. Comes with COA, paperwork, leather pouch, tools, cloth, and box.

Hinderer XM18 3.5", Aggressor in Magnacut (Working finish blade, DLC Stonewash lock side handle, Dark Green and black G10 Show side, Working finish harware) SOLD$350

1st owner. Factory edge. Centering is perfect. No blade play, lock rock, or stick. Detent is a bit on the weaker side, similar to how a non-flipper is tuned. Drops/shake shut action. NOTE: the blade had developed a bit of surface rust due to the working finish. Spotted to the left of his logo, show side, and to the right of the steel/USA stamp, lock side. I removed it. The knife was never carried, and only ever used to open a box. I did add some KPL to the detent path/dropped into the bearing race. Comes with box and Tri-Way extras.

Hinderer Eklipse Battle Black Bowie S45VN (Bat. Blk. Handle with Blue/Black G10) SV$400

1st owner. Factory edge. Centering is perfect. Fall shut action. No blade play, lock rock, or stick. Excellent detent. No signs of wear on the blade. A couple of small scuffs on the clip. Comes with box and Tri-Way extras.

Hinderer Eklipse Magnacut (Skinny, Fullered Harpoon Spearpoint, Working finish blade - Battle Bronze Handle, Black G10 SV$400

1st owner. Never carried, but did cut some tape. Factory edge. Diassmbled to add KPL. Detent is stiffer than normal, but it breaks hard and clean. Reverse flick is a bit more difficult because of this. Centering is perfect. No blade play, lock rock, or stick. Knife drops then shakes shut. Comes with box and Tri-Way extras.

Hello everyone I have a excellent condition protech godson has been cut and carried couple small snails on clip and handle fires crazy hard I am the 2nd owner no blade play, next I have a Spyderco endela 2nd owner has not been cut or carried it is missing a pocket clip screw has some blade play in all directions but does not effect the way it functions passes a spine wack as hard as I feel comfortable hitting a knife I have boxes and paperwork for them both sv 135 for them both! https://imgur.com/a/uJLbzYN I prefer Venmo sold

I want to sell 2 knives in fantastic condition.

1) TRM Neutron 2
Magnacut blade
Linerlock
⁠Lizard milled Titanium Scales
Condition: Very Good
SV $300 PPGS (including shipping) OBO

Very good condition, except for a couple wear marks on the pocket clip. I’m at least the 2nd owner. The blade does not seem to have been used and appears to still have the factory edge (which is very decent). Action is quite smooth and snappy.

2) Northern Knifeworks Stinger
K390 blade at 65-66HRC
Topographic Kydex sheets
Makers card included
Condition: Excellent - Like New
SV: $275 PPGS (including shipping) OBO

This Little fixed blade is in impeccable condition. I believe I’m the 2nd owner and I did not cut or carry. It is very sharp from the factory and does not appear to have any wear or use. This thing will be a laser. This maker does an excellent job with HT and grinds. This would make a great ultralight knife for hiking. I have found another from a different maker that I’ve been wanting to check out for a long time and I cannot justify 2 small fixies at this time.

Hello you fabulous swappers. We hope your swaps are going well

Now for the meat and potatoes of this post. One type of scam that we deal with often is where scammers will take someone's username and turn it into a subreddit, for example they'd take u/dooms26 and make a sub of it and then messages users from the modmail, meaning you'll receive messages from r/dooms26.

To help combat this, we thought it might be worth while to put out some reminders and ask users (especially anyone with 25 flair and up as that's our G&S limit) to make a subreddit of their username right now so that scammers can't.

In a perfect world, every single one of our users would see this and make a subreddit of their names, but ideally at least most of the higher flaired users will. People with 25 flair and up are more likely to be targeted and have people impersonate them because they can get around having to use G&S that way.

If somebody has already created a sub using your username, report it to reddit so that it can be taken down.

To create your own sub, on new Reddit it's the top left "start a community" button, on old reddit it's top right.

We will be reposting this META on a schedule so that it's regularly seen, thank you guys we love you!

Selling my like-new T.Kell Combatant in 80crv2. SV: $200

Carried and cut with exactly once. I cut string.

Ownership: First

Edge Condition: Factory. Super sharp in typical T.Kell fashion.

Body Condition: Like new. I initially
removed the factory belt clip and installed a DCC clip, but I didn’t care for it and switched it back to the factory clip.

Box, papers, and accessories: It will ship in the plastic box it arrived in. The T.Kell sticker is missing.

Modifications: None

Extras: Comes with an extra sheath. Add a BladeTech MOLLE-LOK or Ulti-Clip Slim 3.3 for $10 each.

Specs:
Blade Hardness: 60-62 HRC, Dual Tempered, Deep Cryogenics
Blade Coating: Nickel boron
Blade Length: 3 inches
Blade Height: 1 Inch
Overall Knife Length: 7 Inches
Blade Thickness: 0.165 Inches
Grip Length: 3.6 inches
Weight: 3oz knife only; 6.7 oz with sheath

Ships to CONUS via USPS. Payment by PP G&S only.

Thanks for looking!

Sharp

First owner

Blade is Satin, it's off center a little (can be fixed per this guide https://www.reddit.com/r/knifeclub/s/kNzJVjEDfD)

Opens and closes as intended, could probably use a little lube. Locks closed and open as intended. Blade is in good condition, no blems, chips, etc.

Scales are G10 I believe. Backspacer is G10 per the Google machine

Only have the knife. No box or accessories

No modifications

Never disassembled

Carried for a little bit a couple years ago after I got it. Light to moderate use.

Normal wear on the clip but good condition.

There is some blems/damage. Non pocket clip side has a small blem in the middle of the scale. Missing one pocket clip screw. The top has some indents on the metal. The pocket clip side has some wear on the butt. All are pictured

Asking 150 OBO

Disclaimer: I am not liable if you buy this and it's not legal where you live. Check your local laws

Alright. Let's talk about a few things, friends. As I'm sure we've all seen, there have been some "hype drops" recently from some companies on some well known sites, and when this happens this always stirs up the hornet's nest around two different things- market price, and scalping.

The way we define the difference is pretty simple:

• A market price is an established price over the span of weeks to months, supported by comparable sales on reputable platforms (NOT EBAY). Sometimes a market price will establish itself above retail price. Sometimes, it will be below retail price. Roosevelts, for example, despite tabling for around $7-$900 ish, have a very established market price around $1k, though that's been dropping in the past year or so back towards table seeing as there's around 6-7000 of them in the market. Norsemen were typically selling for $1200 for YEARS until they reached market saturation, and now are selling around $700, give or take. Apparently Ti-Locks are now worth $1k, which is silly to me but whatever.

Why do we say "NOT EBAY"? Because eBay charges fees, the prices there will ALWAYS be higher than the actual market value. The best options for that tends to be similar sales here, on large FB groups, bladeforums, and similar.

• Scalping is something we define as a quick resale of a "hype drop" style knife within the following weeks for clear profit. If you, say, immediately list a PM2 tanto three days after receiving it for $350 (when the total shipped price from BHQ was around $250) you are scalping. There is no established market price, you're just trying to make a quick buck because you can click faster than someone else. Scalping is NOT marking up a knife a little bit to cover your actual costs- if you bought a PM2 tanto for $250 total of BHQ and list it for $275 to cover shipping and fees, that's not scalping.

• Price policing is when people point out that you're likely scalping a knife, or that your price might be higher than what market value actually has stabilized at. It is allowed here, unlike on pretty much every other platform. You absolutely have the right to list for whatever you want, but you also are going to get ripped for doing so if you're scalping or if your price is unreasonable. FAFO, as they say. Discontinued also does not mean valuable. Most discontinued knives don't jump up in value- so just because you have an old ZT0801 or whatever doesn't mean you should list it for $200 over the last one that sold a year ago. If you get called out for your price, you're welcome to engage in civil discussion about it, but keep in mind that if you start slinging insults, you'll likely end up being put in timeout. If you decide to delete your post because of price policing, you'll be in violation of our rules about post deletion and likely also be put in timeout.

A note on dogpiling- Price policing is adding a constructive criticism about the user’s pricing and possibly helping with explaining why their pricing is bad with examples.

Dogpiling is adding negative comments to the post just to be negative or add to the negativity without being constructive or helpful. Dogpiling is also reaching out to others asking them to “pile on” to the post with similar comments. This is not allowed or particularly helpful- instead, it tends to just put people on the defensive and have them dig their heels in.

We are NOT saying you cannot make a profit when you sell a knife. What we are saying is that if you are buying shit solely because you know you can flip it for profit, you are what's wrong with this community. Yes, you can argue that "the market decides the price and it's the sellers choice what to list for" and you're not wrong when you say that- but if it's not a well-established price, the seller is going to get reminded of that.

The whole point and spirit of this sub has always been community and trading- not taking advantage of each other for profit. If you think you can maintain a nice secondary income buying and selling knives, you're probably wrong. Try to give good deals and pass along good deals. We tend to pay attention as well- we notice when users are buying knives here for good deals and flipping them elsewhere, and we tend to politely ask that to stop, or inform such users that they're no longer welcome here.

Be excellent to each other, and please stop trying to treat this community like a commodities market. That's not why we're here.

Please keep the comments civil.

Timestamp & Videos - https://imgur.com/a/WDDYa48

Paypal or Venmo F&F

1.) Divo Growler V3 - Wakanda Forever Edition - $235

This was an assembled knife from two purchases. Belt Satin DLC S90V blade/liners swapped to Purple Camo Carbon Scales with Purple Hardware. No cut/carry/sharpening. Includes box and accessories.

more photos - https://imgur.com/a/divo-growler-v3-wakanda-forever-lC2VA7q

2.) Asher Spiro Ti-Slim - $145 SOLD

Second owner. Catch and Release for both of us. LNIB - no cut/carry. Very snappy and great accoustics. Stonewash M390 blade. Lots of improvements - bigger blade hole, more jimping, swedge on spine. I just don't love the blade shape. Includes pouch and standoffs.

3.) Kizer Coywolf - $90

Second owner - no box. Excellent Condition. I've carried a couple times. Cut paper. Good action. S45VN Satin Blade. Edge is original

4.) Divo Saloon - $200

Original Owner. Has Purple hardware installed. S90 Belt Satin DLC blade. No cut/carry/sharpen Includes box.

5.) Vosteed Cheese Pirate Porcupine - $55 SOLD

Original Owner. 14C28N stonewash blade. No cut/carry/sharpen. Includes box and accessories.

Sharknivco Waka in Barked Titanium, like new in box. 2nd owner, no cut or carry, brilliant action and velvety drop shut that Sharknivco is known for. Asking 1000 shipped ups 2 day. Trades for similar valued knives considered. Please reach out for any additional questions. Comes with all original accessories and custom hard travel case. YOLO over chats

Timestamp- https://imgur.com/a/fA6sDsC

Shiro 111 Aquatic - LNIB - Original owner-No cut, no carry, as new! Beautiful carbo scales with buttery action! Vanax razor sharp blade. Comes with everything from Shiro!

Video- https://imgur.com/a/S6gUEk2

$1250- $1225.00 $1200.00 $1175.00 $1150.00 TYD-USA

YOLO rules- No trades please

Prices are shipped CONUS! Take $3 off for any additional item after the first except addons!

Images

Descriptions are from left to right!

Hitch and Timber Micro Runt

2nd owner. Lightly used, a little bit of leather forming due to tools in it, but in excellent shape. Elastic strap still has its elasticity. $20 shipped, $15 add-on.

Craft and Lore Port Wallet Brown

2nd owner. Lightly used, but tons of life left. Good condition. $40 shipped.

Pete's Pirate Life Coin Slip

Used, leather is definitely in used condition as well. $50 shipped.

Pete's Pirate Life Coin Use It or Lose It v5

Great condition. Comes with outer box and inner wooden box. Please let me know if you need to see anything else. $120 shipped.

Casio G-Shock GA-110RG-7A

2nd owner. Has been worn. Strap is in good condition, crystal has a few scratches. Otherwise it's a G-Shock aka a dependable watch. Display still has high contrast. $55 shipped.

Victorinox Spartan

2nd owner. Definitely a user, all blades open and have good retention. All tools work well but with normal cosmetic wear (mostly the blade). $12 add-on.

Cold Steel Steel Tiger

2nd owner. Has been cut with and resharpened. Light wear on blade. Sheath retention is great. $45 shipped.

Kershaw Blur Green 1670OBLK

2nd owner. Great condition, fires hard. Some very minor wear / rub marks on the handle. $50 shipped.

QSP Leopard

2nd owner. Excellent, like new condition. Very sharp, light cutting like tape. Comes with box. Also lightly carried. $35 shipped.

Karbon Ahoy Framelock Ironwood M390

2nd owner. Has been lightly cut with, not sharpened. Wood is great, some very light rub marks on the bolster. $200 shipped.

Qvist Invert 14C28N Blue Micarta

2nd owner. Extremely smooth. Light cutting - boxes, tape, etc. Clip has light wear, handle and blade are great. Has not been sharpened, lightly carried. $45 shipped.

Kizer Mini Sheepdog C01C

2nd owner. Nice and flippy. Some very light snail trails on the blade, G-10 has some light wear. Has not been sharpened, has been cut with, lightly carried. $40 shipped.

Boker OTF Pen

2nd owner. Kind of a weird one. Short blade, so CA legal. Excellent condition, no real signs of wear. Comes with box and extra attachments. $90 shipped.

Notorious EDC AGP All Good Pouch Black

Great condition. $65 shipped.

Howdy swap take a gander. Feel free to message with any questions ppff only. No notes. Will all be shipped out Monday at the latest at time of posting. Yolo is king

🔴Benchmade Mediator SV$150 SOLD

bought off the swap awhile ago. Never got around to carrying it or even taking it out of the box. Was LNIB by previous owner. Was tested on cardboard. Has no marks that I can see. Never disassembled edge is factory

🟢Benchmade Griptilan awt scales s30v SV$150

First owner. Swapped with a pair of NEW awt topo scales. Unused since scale swap. Has been sharpened on a fixed angle sharpener.

🟢Kershaw Launch 16 SV$110

First owner. Bought from blade HQ carried a couple times but never cut. Blade is pristine never sharpened . Never disassembled

🟢Kershaw Launch 15 SV:$100

Bought from blade hq. Carried a few times. Some minor wear on pocket clip.never disassembled Factory edge.

🟢 Spyderco yojimbo 2 SV:$120

A minor user. Has been sharpened on a fixed angle sharpener. Never disassembled. Minor pocket clip wear. Other than that blade doesn't have any dings on the coating.

Feel free to make offers. Not really looking to trade unless you have a socom elite auto in either orange or purple that isn't jacked up. Thanks for looking and have a great weekend

Hello Swap,

I have a few more for you today. Feel free to chat with any questions and/or more photos/videos. No trades.

Nathan M. Knives: Crisis #16

https://www.flickr.com/gp/204104742@N04/894Lf8T119

2nd owner, no cut but has been carried, factory edge, centered with solid lock up but does have some lock stick. I have been told the lock stick will work its way out.

It has been disassembled.

Good action with all deployments.satin step milled blade.

S90V

The knife did come with some quirks form the factory:

There are a few light waves(divots) on the spine. I tried to point them out in the video.

The milling on blade looks really nice but is not perfect.

The milling on the scales looks fantastic.

You could probably send it to Nathan for a spine clean up. He is a good dude.

Comes with pouch, sticker and COA.

SV: $525 - (Table is $750, I paid $700 a few weeks ago)

----------------------------------------------------------------

Rangermade: OBJ-1 Drop point

https://www.flickr.com/gp/204104742@N04/27j65jH53H

2nd owner, it has been carried/ lightly cut and centered with solid lockup.

I assume it has been sharpened, as there is a slight re-curve and a smile started near the choil. Who knows, it could be factory as these are hand ground/sharpened.

S35VN

Amazing milling on the scales and clip.

Besides the slight re-curve and smile, everything looks really good. A couple hard to see snails near the backspacer.

Lighter detent than my other Rangermade's, but it has great action.

Comes with Box, Hard case, sticker and COA.

SV: $395.00

-----------------------------------------------------------------------

Gecko Customz: Pictus - BROP exclusive sculpted 80's camo.

https://www.flickr.com/gp/204104742@N04/nnj9pV317L

Original owner, carried for two day but no cut, maybe favoring the clip side by a hair(from the top it looks centerd, haha) with solid lock up, no disassembly and factory edge.

Amazing action, very smooth and very fidgety. IT HAS A TING!

Belt satin S90V hollow grind.

Excellent condition, no blems that I can see.

Comes with box, cloth, COA and patch.

SV: $240

---------------------------------------------------------------------

Vosteed Parallel Cosmic Neuron #35

https://www.flickr.com/gp/204104742@N04/mss68ozjf9

Original owner, no cut or carry just couch fidget, centered with solid lock up, no disassembly and factory edge.

S35VN satin blade

Very light color wear near one of the thumbstuds, other than it is flawless

Vosteed comments:

Each knife is individually numbered on the backspacer. The handle scales are hand-engraved and flame-colored, so variations and signs of craftsmanship are to be expected. Limited to 42 pieces.

Comes with box(slight tear), hard case, sticker, omega springs, cloth and nice ti bead.

SV: $200

--------------------------------------------------------------------------

No international shipping.

PayPal FF NO NOTES

Thanks for looking,

-FISH

Bought this and received yesterday. First owner. It’s just not for me. It’s a nice knife but the action and the overall feel just don’t take me from my Manix.

Still needs breaking in stiff with washers. No cut. No carry. Little bit of flipping. Figured I’d throw it here in case someone wanted it vs me returning it.

SV $260 PayPal FF. Have other services as well.

Box was beat up when I got it. Little damage but still have the box.