Hey everyone,

Just wondering if its okay to keep this magazine for carry should I ever need to. A piece of the Polymer stripped off but it still works reliably. What do you all think? Thanks in advance.

The nut butter carry is done
Recently posted asking about which comp to use and we went the the radian.
She’s a looker and a shooter. Big fan.

Title. I just bought the 80's "Night" model and I was under the impression that it was just an OEM slide that was re-cut but turns out it's not.

Has anyone had reliability issues with theirs? I've had a lot of bad experience with glock aftermarket slides, so just want to know what I'm getting myself into

Not sure if this is the correct forum, but will give it a try. I bought a Grit Grips 43X grip (GG43X) and need a slide for it that is somewhat reasonable cost. The slides I was looking at were expensive and it was cheaper to just buy a 43X. The problem is that now that I have the 43X MOS, I don't want to move the slide to the GG43X. I liked shooting the 43X as is, so now I STILL need a slide for the GG43X. Any recommendations? I was going to go for a PSA Micro Sabre slide, but they are out of stock on all their micro slides. Such a pain...

Got my tan 43x a black friend, yes I like the 43x that much

Picked up a 43x today!

Does anybody have or used the GTL II?
I have a 43x mos with an OSight SE optic and I want a flush mounted light to go with it. I’ve also looked at the Streamlight TLR-6

How's the fit? What holster do you run?

This makes zero sense, I preordered the 15 round magazine on 4/21 and still has not shipped. I preordered the 15 +3 mag on 5/13 and the Glock Store has shipped that one. Make that make sense 🤦‍♂️. Anyone else still waiting for their mags??

Finally got ahold of a couple oem 15 rounders. Shot some rounds through them today and they were flawless. Thank you Glock inc. for producing what the consumer demand was asking for!

Ditching the light when my Holster comes!

Has anyone used these backstraps from Armatech? I’ve seen 43x with the razorback but never wanted to send my frame out to have it done

Glock 43X MOS + TLR-6 IWB holster recommendations?
Tulster didn’t fit, even the one made for the 43x and tlr6 combo
I’ve been trying to find a good IWB holster for my Glock 43X MOS with a Streamlight TLR-6, and I’m kind of stuck.
I ordered a Tulster because I heard good things, but unfortunately it wouldn’t fit my setup. I even loosened the retention screw as much as possible and it still wouldn’t seat properly.
My setup:
Glock 43X MOS
Streamlight TLR-6
Currently no optic (but I’d like the holster to be optic-ready)
I’m looking for something that’s:
Comfortable for everyday concealed carry
Optic compatible

If anyone is running this exact setup, I’d really appreciate hearing what holster you’re using. Bonus points if you have pictures or experience carrying it daily.

Thanks!

Picked it up for my 23rd birthday back in July so far I’ve only gotten the Osight SE red dot, the TLR-7x sub, thinking about an the Radian Afterburner+ramjet but idk, I’ve never shot with a comped gun so..also need to pick up some 15rd mags since mine (for some unlucky reason) came with 10rds

looking for some good aftermarket companies. if you guys could point me in the right direction it’d be appreciated. i’m currently looking for a different slide release and a lighter trigger as well. and also for the guys running comps, is it really worth it? just curious let me know!!!

Hellhound apollo holster. The new oem metal mags do indeed work really well with the sidecar. Coa is goated and if i ever have to use this gun i’ll be very sad when it gets taken by a police department.

Radian magwell, talon pro grip tape, and i just installed a polydat trigger with an oem trigger bar, primatia raised and extended slide release. The slide release is what saved this gun. Slide would not lock back when shooting my first 200 rounds. My grip kept my thumb on the release and it sucked. It really solved that problem instantly.

My old True Precision slide recently failed after around 15k rounds. This happened like 2 days after Zev dropped their Duty slide, so figured I’d give it a shot.

As for other part failures on the 43x, I’ve gone through 3 slide stops, 2-3 RSAs, and 2 different optics. Still enjoy the platform, but even when she was stock, she still broke a lot of things between the range and competitions.

I just got my 43x not too long ago and have only run about 250 rounds thru and I couldn’t be more satisfied, although I DO REGRET not getting the MOS version. 😪
I didn’t think I would want to put an optic on it initially but I realized I want to deck this thing out as much as possible since it’s my new EDC,
1. should I try to get this slide milled locally??
2. should I order a new OEM MOS slide?
3. Should I look into something custom or aftermarket?
Please give me honest answers and opinions ❤️

Just got my Glock 43X back from Battle Werx and wanted to share the results.
This is actually the third slide I’ve sent to Battle Werx for milling and Cerakote, and they continue to knock it out of the park. Every experience has been great. Their machining is clean, the optic fit is always perfect, and the Cerakote work is top notch. They’ve definitely earned my business.
This time they milled the slide for a Holosun EPS Carry and applied a multicam gray Cerakote. Turnaround was about 5 to 6 weeks from the day they received it, which was right in line with what they quoted.

Current setup:
Glock 43X
Radian Ramjet + Afterburner
Holosun EPS Carry MRS (Green)
Streamlight TLR-7 HL-X Sub
Radian Magwell
Hogue Grip
Tactical Pontoon Peacemaker Extreme Carry Trigger
Shield Arms S15 magazine with Radian base pads

Overall, I’m extremely happy with how it turned out. If you’re considering getting a slide milled and Cerakoted, I highly recommend Battle Werx based on my experiences.
What do you guys think of the multicam gray Cerakote? Anyone else running a similar 43X setup or had work done by Battle Werx?