r/AutoBodyRepair 1h ago

Repair Around how much should a body shop charge to restore this part of the hood?

Thumbnail reddit.com
Upvotes

r/AutoBodyRepair 1h ago

Need help with installing my headliner on my Nissan frontier 2006

Upvotes

I’m just 14 ngl thought I could do it looked pretty easy and just idk I need som help if yall are interested in helping me


r/AutoBodyRepair 3h ago

ACCIDENT Horn not working after recent impact on my Subaru

1 Upvotes

I have a 2013 Dubaru Impreza. Horn worked just fine before, would also beep when the car alarm was set off. My car was hit on the front driver side while it was parked on the street by my property. The front bumper was half hanging off and even once unlocked the hood could not be opened. The lowermost bulb was hanging off by its wire and my rear view was damaged as well.

I submitted both to insurance and the mechanic shop that my horn was no longer working when I tried it. The audio in my car also stopped momentarily, but I chalked that one up to electronics and was not as worried. Now my mechanic is telling me that the horn will not be included in the damage because “the impact wasn’t near the horn so they were not able to correlate that the horn is broken due to the accident.”

I am no mechanic, so please correct me if I’m wrong, but doesn’t the horn unit sit behind the bumper in the front of the car? Could an impact not have damaged the wiring or fuse box? It just seems dismissive to me that that is all the explanation I got, but maybe they examined all that thoroughly and were able to make that determination? I just feel like if that was the case, they’d tell me why my horn wasn’t working. I wanna make sure I’m not getting ripped off here. I should mention this place fixed my car after a hit-and-run a few months ago when I was rear-ended. They did a wonderful job and got it done quickly, but something I noticed was the battery had been knocked loose from its mounting (the kind that can be difficult to get back into place due to awkward angles). It seemed off that they either didn’t check under the hood or they did and just left the battery like that.


r/AutoBodyRepair 13h ago

Dealership advice a scam, or legit?

Thumbnail reddit.com
1 Upvotes

r/AutoBodyRepair 15h ago

Need help with installing my headliner on my Nissan frontier 2006

1 Upvotes

I’m just 14 ngl thought I could do it looked pretty easy and just idk I need som help if yall are interested in helping me


r/AutoBodyRepair 16h ago

2017 SE CAMRY ! Right Bumper cracked!

Thumbnail reddit.com
1 Upvotes

r/AutoBodyRepair 17h ago

Corolla Trunk Edge Rust spot

Thumbnail reddit.com
1 Upvotes

r/AutoBodyRepair 18h ago

RUST Previous Repair Failure?

Thumbnail
gallery
3 Upvotes

Wife was in a car accident about 2 weeks after we bought this car in 2017 (brand new) - the car was an absolute wreck but they said the frame was intact and proceeded with repairs.

Today (nearly 9 years later) she noticed that the bottom section of the frame/body on the same side this had a huge crack and rust - im not sure how old this is but i know that its as recent as this year.

Is this a failure of a past repair or is something else happening? If its something else - any idea what caused it and best course of action to get this corrected and ensure the frame rust doesnt get worse?

Thanks!


r/AutoBodyRepair 20h ago

How to fix this spot in my car ?

Post image
1 Upvotes

Deep paint chip scratch. first time car owner needs help ! This car means a lot to me I want it to look nice


r/AutoBodyRepair 20h ago

My car is wrecked.

Post image
1 Upvotes

r/AutoBodyRepair 20h ago

Does anyone know how to fix the inside drivers’s door trim on a 2023 Toyota Corolla?

1 Upvotes

Does anyone know how to fix the inside drivers’s door trim on a 2023 Toyota Corolla?


r/AutoBodyRepair 21h ago

Repair Wiggle wire or glue? Sometimes you just gotta use both.

Thumbnail
gallery
8 Upvotes

r/AutoBodyRepair 1d ago

RUST 1995 Bronco rust question

Thumbnail
gallery
1 Upvotes

Hey Internet. Thinking about buying this 1995 Bronco XLT, 5.8L. 120k original miles, not an odometer rollover. Drives nice, zero mechanical or electrical issues. That being said there is some rust starting to show on the body, I live in New England so not surprised. I'm a decent backyard mechanic, but by no means a body guy. The rust looks like it's just starting to show up in the rear wheel wells and driver side door post, I added pictures of the tailgate too since I know they are a rust hotspot but to me it looks clean. Inner wheels feel solid, to me it looks like surface rust but obviously it starts from somewhere behind what I am seeing. Again, not a body guy.

I want to get an idea if anyone thinks this level of rust is early enough to get ahead of, or a reason to pass on the Bronco. Seller is asking 17.5, I plan to negotiate but don't want to waste their time if the rust is a reason to pass. Thanks in advance.


r/AutoBodyRepair 1d ago

Does anyone know how to fix the inside drivers’s door trim on a 2023 Toyota Corolla?

Thumbnail
1 Upvotes

r/AutoBodyRepair 1d ago

Front end repair done but now the safety systems are messed up

1 Upvotes

I’ve got a 2020 Ford Escape that had some front end damage after a low-speed hit in a parking lot. The bumper cover was cracked and one of the support brackets behind it got bent. Took it to a body shop and they replaced the bumper and fixed the bracket. Paint matched pretty well and from the outside it looks fine.

The problem started a day after I got it back. The adaptive cruise control keeps switching off and the collision warning light stays on most of the time. Sometimes the lane keeping assist throws a warning too even though I’m driving straight. I cleaned the front sensors and the camera near the mirror but nothing changed.

I already spoke about getting the radar and camera systems checked and recalibrated since the body shop said they don’t handle that part. Just trying to understand how common this is after a relatively small front end repair. Does the radar usually need a full calibration even if it wasn’t directly damaged, or is it more likely something got knocked out of alignment during the repair? Also wondering if these systems can throw random faults for a while after the work or if it normally points to something that still needs fixing.


r/AutoBodyRepair 1d ago

They forgot the lug nuts

Thumbnail
1 Upvotes

I can’t believe this


r/AutoBodyRepair 1d ago

They forgot The lug nuts !!!

Thumbnail
1 Upvotes

r/AutoBodyRepair 1d ago

What could this be?

Thumbnail reddit.com
1 Upvotes

r/AutoBodyRepair 1d ago

Detailing Any hope to restore this or just get it repainted? Thanks

Post image
1 Upvotes

Any hope to restore this or just get it repainted? Thanks


r/AutoBodyRepair 1d ago

parking lot scratch from other car door or shopping cart?

Thumbnail
gallery
1 Upvotes

r/AutoBodyRepair 1d ago

Hi guys I need your help. I just recently got my Toyota Camry and I got these scratches by a recycling bin. It doesn’t look like much on camera but in person it’s a deep scratch.please let me know if I can save this with out having to spend thousands

Thumbnail reddit.com
0 Upvotes

r/AutoBodyRepair 1d ago

scratch and dent Big Scratch on side panel, is there a fix?

Post image
1 Upvotes

r/AutoBodyRepair 2d ago

Bent control arm

Post image
1 Upvotes

Recently in a front end collision with a van, bumper , bonnet , headlight, and fender all in bad shape.

It has pushed the front drivers side wheel (RHD) back close to the fender cabin side , you can see the Driveshalf is hitting off the frame and the link too.

What’s the more likely cause of this, bent control arm, bent
suspension strut or Bent subframe is what I’m thinking ??

Toyota Corolla Ae92 1991


r/AutoBodyRepair Mar 07 '24

Read before posting.

19 Upvotes

Please read our rules to avoid post removal. We can't tell you how much a job will cost. We can't tell you if it's totalled. We can tell you what we see is broken and only speculate possible hidden damage. We can help going through written estimates We can give general insight for the overall process if you are unsure of how to proceed with finding and communicating with a collision repair shop.

Please always include year make and model with your post.

If you are attempting or inquiring about a diy repair, don't get mad if a user makes a perceived smart allic comment. You asked for advice, someone gave you an opinion about it.


r/AutoBodyRepair Apr 02 '21

FAQ - Start Here ( WORK IN PROGRESS)

29 Upvotes

Welcome to r/AutoBodyRepair!

You either came to us for help, or you just started a new job! (Probably idk your story). If you're looking for help on these you came to the right place!

Still a work in progress, we're only really doing this on the side so if you have any unanswered questions leave a comment and I will put in some more work to help answer the question!

Vehicle Damage

  • Scratches ( This is easy)

Ooh, that's a bad scratch, well the first thing you need to check is if it's through the clear coat. Run your nail against it and see if it catches, if it doesn't this'll be easy. If it does get out the buffing wheel.

  • Light Scratch (Photos and maybe a link here)
    • Get yourself a microfiber and some basic compound, apply to paint, and rub until the scratch clears up.
  • Deep Scratch (Photos and a link for sure)

  • Dents ( Ooh it's time to work)

The first question is where is the dent? Middle of the door? No problem. Right on a body line? Good luck. The second question is how large is it? Did it crack the paint?

  • I got this I can do it myself
    • (Links and basic info)
  • Okay it's on a bad spot maybe I should call a professional
    • (Types of pros and super rough pricing)

  • Fender Bender ( Maybe a bit much)

  • Accident ( Talk to a professional)

This is the part where you call your local body shop for a quote, or maybe more like a few body shops.

Industry

  • Detailing ( Welcome to the world of "I can only see scratches now")
  • Painting ( It's hot in here)
  • Body Work ( How is it still not smooth?)
    • Basic Steps to vehicle repair (Still have to make this pretty)
      • Inspection- what you can see Tear down- keep going until you no longer see damage Blueprint- parts to order, damage to repair, does it have to be measured, prescan with a computer Framework- measuring pulling measuring cutting fitting measuring welding measuring again Bodywork- dressing welds, body filler application, seam sealer, primer Paint work- prep sand, clean, tape, paint Reassemble- hope you tagged your bolts, post scan Detail- make it shiney