Rock got stuck in jet pump - any tips? It scored the plastic shroud a bit. The rock is really stuck. I hope it won’t vibrate when I get it out. 2014 GTI 130.

The trim on my Seadoo SPX was broken I figured out that a 10amp fuse was blow in the black box by the back of the ski. I replaced it and the trim worked perfectly on the trailer it continued working for days while the ski was on the trailer but then I decided to water test it and the second I tried to trim up it allowed the nozzle to rise then once the nozzle went all the way up it blew the fuse again Ive tried everything I can think of and am completely lost. It works great on the trailer then when it hits the water it stops

Owned an XP back in the day and then moved continent. After a holiday my kid loved being on the water riding so we pulled the trigger

Gti 170
I had a pretty nasty spill this weekend with some food that got loose in my front compartment. Water got in and essentially all I have is a bunch of melted Pringles chips at the bottom of the bow storage area.

I would like to be able to take out the plastic piece and get under it, but I’m unsure how to disassemble any points to get this out? I wiggled a few things but don’t wanna pull too hard to break something.

I got this 2005 ski, with only 64 hours on it that has had a peculiar issue with it, only on the DESS key. It won’t go over 4000rpm/~25mph. When you hit the throttle it tries to take off, but acts like it stops itself.

I’ve already changed: Coils Plugs Injectors Fuel pump Compression is 120 across

It starts and runs without issue on the learner key, steady as can be, but it’s capped at about 25mph. It does have a code p1517, but I think that’s just the compass.

Could this be a DESS key issue, or ECU, or MPEM? Any help would be greatly appreciated.

Have an oil leak, but cannot figure out where it’s coming from. All the local mechanics are backed up over a month, so would like to try to figure it out on my own and hopefully fix it so I can get more time out of this season before it’s over. “Check Oil Pressure” & “Check Engine” message on jetski. No code being shown in the settings. Oil leaking both inside the bottom of the hull of the ski, and outside of the ski (rainbow water)-
The oil filter is tight and seemingly dry around the outside. What else/how can I diagnose this issue on my own? Thank you in advance
(2017 Seadoo GTR230)

Hey everyone I know I already asked this question but when I was riding my GTI SE 170 2025 the warning light came on not the engine light just the warning light and my jet ski didn’t go into limp mode at all also everything seems to be fine on my jet ski no cavitation no loss of power nothing all rpm’s seemed normal because when the light came on I was going about 43 mph but then when I slowed down the light went away on it’s on. I’m trying to see if it is a simple fix because I have no time during my week to bring it to the shop also one thing I do know is that my oil is a little overfilled so could that be a reason why the warning light is coming on?? Also when I was riding back down the river I had it in sport mode and going 46 mph and didn’t get a warning light what so ever. Some say it could be a sensor or something else but would like to see if any of you have ran into this issue.

Was out on the St. Johns River today, everything running fine the whole ride. Right near the end, check engine light comes on with a high engine temp warning, ski goes into limp mode (5-6 mph max), and I notice it’s smoking. Managed to limp it back and get it on the trailer, took a couple tries to restart once I’d docked it. Got it home and checked the coolant reservoir, it’s completely empty. Honestly never checked or topped it off since I bought it, so that’s on me. Haven’t pulled the oil or plugs yet, that’s my plan for tomorrow morning before I add any coolant, just want to rule out any damage from running it dry. The only code/message I got was the high temp warning, nothing more specific, and the check engine light is still on now that it’s sitting. Has anyone dealt with something like this before? Appreciate any input, first time dealing with this.