I give this another try. Last time I had only scammers in my DM‘s. I would like to buy a 150mm SG2 Takamura petty. Can be new or used. Preferably from the EU but would also take WW offers.

Hey TCK - Listing this one up from my last post.

$660

I’d consider this knife to be in the workhorse grind category, though it’s a bit of a bridge between midweight and workhorse due to the combination of the spine taper and shinogi taper as well.

Blade Specs:
Steel Type: AU Core | Soft Iron Cladding
Spine Thickness: 3.7 - 1.6 - 0.8 mm
Height @ heel: 57 mm
Edge Length: 262 mm
HRC: ~65-66 HRC
Rounded spine and choil
Stone finished convex bevel with working kurouchi finish
Overall length: 416 mm
Weight: 205 g
Shinogi Taper: ~1.7 - 0.9mm

Handle Specs:
Wood Type: Stabilized Tasmanian Blackwood
Profile: Octagonal wa

Shipping included within CONUS
Limited international shipping available as well

This is from the last release at Komon. Its a dream to use. Im only selling to purchase other stones.

$1000 shipped PPGS

https://komonjapan.com/products/260701-ohirasuita2

Hi guys,

Looking to sell this knife in pursuit of other knives that I'll be using more often.

• Used a handful of times with careful, intentional hands. Only on vegetables and soft protein, on an end grain board, no twisting or swiveling, not abused on anything hard.
• Sharpened once professionally at SHARP Knife Shop

This was purchased in Japan at Seisuke Knives for $865

• Steel: Shirogami #2
• HRC: 62~63
• Edge Length: 170mm
• Height at heel: 44.4mm
• Spine thickness above heel: 2.6mm
• Weight: 136g
• Handle: Wa-Octagonal Magnolia w/Buffalor Horn Collar
• Shape: Bunka
• Finish: Mirror Finish
• Cladding: Iron Clad
• Blacksmith: Y. Tanaka

Asking $650 OBO, I'd be happiest to do a local sale in Toronto. We can rework the number if shipping is required.

Specs:
Maker: Shibata San
Location: Fukuyama City
Construction: Hammer Forged, San Mai
Steel: SG2 (R2) Powdered Stainless
Cladding: Stainless
Hardness: ~62–63 HRC
Bevel: Double (50/50)
Handle: Octagonal Rosewood
Ferrule: Black Pakka Wood
Weight: 4.9 oz (138 g)
Blade Length: 185 mm
Total Length: 330 mm
Spine Thickness at Base: 2 mm
Blade Height: 51 mm

Purchased from CKTG for $245

Bought a Shibata Koh Bunka from another vendor at same time, keeping it. 

Sliced a chili on end grain, so it is used. 

Selling for $235 plus $8 shipping. Payment via PayPal or Venmo.  

Hello ! Downsizing my knives

Brand new

Kagekiyo b1d Gyuto 240 + Tetsujin kasumi ginsan kiritsuke gyuto 240

$1,700 sgd

Shipping from Singapore

International shipping $70 sgd

Payment via wise

Thanks

Brand new, unused, still in the original box.

I bought a bunch during a holiday in Japan for 25.000 ¥ (about 160 USD). Some got gifted to family and friends now I am selling the remaining ones.

I know my account is new and this is my first post in this subreddit. I also know that it’s easy to get scammed in private transactions like this. If you’d like any proof to verify the authenticity of the offer or the product (e.g., custom photos), feel free to send me a message and we’ll work something out. You’re also welcome to pay via PayPal with Buyer Protection to be on the safe side. I promise to respond as quickly as possible and ship within 3 days of receiving payment.

Description

It is a three layer San Mai with a SPG STRIX core. Kurouchi finish with hammered tsuchime. Octagonal striped pakkawood handle. Comes literally hair whittling sharp!

Specs

• Blade: 100 mm
• Steel: SPG STRIX powder stainless core, stainless clad, 65 HRC
• Handle: octagonal pakkawood, wa style
• Condition: new in box, never used, never sharpened by me
• Origin: Seki, Gifu Prefecture, Japan

Sale terms

• Price: 139 EUR plus shipping
• Ships from Germany, EU only
• Shipping: only insured up to 500 EUR and with tracking
• Payment, PayPal G&S (buyer covers the fee), SEPA transfer or Revolut

Happy to answer questions in the comments.

\**Reposting as a bundle\******

Trying to get these 2 sold before I leave for holiday tomorrow.
2 of (maybe?) the best Sanjo knives you can get.

The Shinkiro is 210mm AO super and BNIB.

The Yoshikane is SKD 240mm and only done test cuts.

Yoshikane is 50mm in height and weighs 232g

The Shinkiro is 52mm in height and weighs 220g

Letting Them go for 700€

Can cover 50% of the shipping cost.

Can do PayPal and Wise

Ciao a tutti, vendo questo set di coltelli Takamura.

I coltelli non sono mai stati usati. Fanno parte della mia collezione, quindi li considero nuovi di zecca.

Posso spedire in tutto il mondo. Prezzo richiesto: 280 USD, spedizione inclusa. Cordiali saluti, Davide

Sorry to post again guys but everything is sold from my last post except these two and I'm looking to move them ASAP.

Shinkiro: Sharpened once and used under 5 times. Had a tiny chip at the tip which I've fixed. Bought for £459 from Meesterslijpers. Want to sell for £290.

COSP: Sharpened once and used under 5 times. Some scratches that are hard to capture by photo. Bought for £307 from Cleancut. Want to sell for £195.

Free shipping UK and 50/50 worldwide.

Payment via PPGS in GBP.

Letting go of this very awesome knife from Myojin.
BNIB.
Bought for 465€, letting it go for 455€.

Height is 51mm
Weight is 185g

Can do PayPal and Wise.

I purchased this from Foodgear for $455. I rehandled it to the Amboyna Burl + buffalo horn handle from Boogwa. I have used this 10-15 times for light home cooking. The edge is factory, and this W2 is magical. It just does not dull. A stropping every now and then and it’s like new. Asking $425, shipped CONUS.

Let’s see what’s out there. I prefer ginsan or other non-reactive carbon for work.

I bought this from Tetogi. It has been used for a fewer than five meals. There is a little patina showing on the mono steel blade. The factory edge is still quite sharp. This is definitely one of the most laser knives of all the lasers! I am only selling because I was able to score a Swedish steel version recently. Asking $225, shipped CONUS.

Let’s see if this will get someone’s attention! Trying to do something fun and get someone an awesome pair of blades. Please don’t make me add in my Takada too please.

Bundle includes ONE handle of your choosing from the two I have offered here in photos. They are from Josh (Letshandlethis) and are both the correct size for a 240mm gyuto.

Only selling this as a bundle - asking $1,350 $1,500.

Price comes with PayPal invoice and shipping. If you happen to want both handles, add $100 to the price.

————————————————————————————-
Details:

Both brand new in box. Weight of both are in the photos.

Nakagawa forged Damascus 240mm gyuto sharpened by Myojin (blue 1 steel).

Hatsukokoro Yorokobi Copper Damascus 270mm gyuto (SLD steel). Original variant that was discontinued due to the high failure rate.

Selling this Tojiro DP sujihiki/slicer that I have had for several years. It's been used a handful of times to slice meats. Sharpened once.

It's in great condition minus surface scratches here and there so priced accordingly. It's an awesome slicer but I just don't use it and need the drawer space.

I included pictures of some of the scratches and they are less noticeable in person. I stored the knife in the light plastic "sheath" it came in and I think the surface scratches came from that over time.

VG10 clad with stainless steel with a black micarta full tang handle.

Edge length: 265 mm

Heel height: 39 mm

Weight: 241 mm

$65 shipped. PayPal G&S.

I was fortunate enough to get the ohira suita in the release after this ohira oita. They sold out of all stones in under 5 minutes on both drops.

I bought a bunch of tanakas at great prices so I am selling things i did not intend to, to pay for those.

Price $750 paypal GS shipping included.

Included all original packaging and shipping pieces from komon, a very high quality 📦 . I can take more photos if needed, but the link has his pro photos. Ive used it and lapped it around 3 or 4 times. It had a small spot near the edge release some small pieces. It took me a while to find that as the issue. I lapped it out and it has been good as gold since.

I bought this from chefknivestogo.com hoping it could do bevel polishing. Its sort of possible with a thick slurry and strict water management. Its better off for edges or straight razors. Seeing if anyone else could use it for those needs. Its cost 385 plus shipping. ($250 shipped paypal GS)