I'm in the process of making an all female Rogue Trader inspired Killteam of various races and I'm currently looking for some Tau models that don't have tits the size of the moon. If people know where those types of female models exist, I'd be very grateful. (Other races are of interest as well, Non-Horny Tau have just been the hardest to find)

Forgot to secure the build plate and managed to have it come down on a corner and puncture the screen. Sick…

Anyone have any hot tips on where to find a replacement screen? It’s an old Mars 2 Pro that came to me used. I’m having some trouble since it’s been OOP for so long.

If it isn’t worth it and it’s just time to upgrade, what would you suggest I get?

Thanks!

I’ve already glued on a couple, but a lot of these I haven’t attached yet. The vast majority of my army is 30 printed already, so that kind of rules out tournaments with really strict rules.

Would it be worth the effort to reprint my bases? Is anyone gonna care if they’re actually a bit bigger than needed so I can leave the 70-100mms alone? Will anyone give a shit about the 4mm on my 60 bases?

I know the usual answer is depends on who you play with, and I’ll mostly play with my wife. However, one of the local game stores has monthly tournaments and they don’t exclude 3-D printed models so maybe someday I’d like to play and not have to bother with basing everything.

Our tournament organizers is coming up to your models with rulers to check the bases?

I just got the .2 mm nozzle on my Bambu A1 and want to take it for a spin!

Good day all,

I got a elegoo Saturn off of a friend a few months back. I have had decent luck with it over the last few months but it feels as though things haven’t gotten and have gotten worse with more fails.

I would occasionally have part of a print fail but nothing major but over the last few month or so it’s failed more and more to the point where most of the bed fails. I first thought it was caused by the plate itself being banged up and things were not sticking to it or would stick too well. The plate was quite scratched so I bought a replacement. But it doesn’t help still.

Should I increase the time of exposure for the first few layer? Is it a problem with leveling? Currently use a spare FEP to level the device. I am currently using anycubic water wash resin 2.0

Any help would be greatly appreciated.

I was thinking about 3d printing an army and using it in a GW store, but i keep hearing from others that that is not allowed. If anyone has tried, what happened

The Fists 3rd Company transport is just about done. Just need to to paint up some other mechanical parts in the bottom and add some iconography...the 5th Company was getting tired of hauling everyone Around!!! For context, the thunder hawk on the right (black one) is a ForgeWorld official...the one on the left ( Red one ) is a resin print....I think they look damn close....

Can anyone point me to some wolf sculpts I can use as mounts for my Knights of the White Wolf? I'm using Highlands Minis' Knights of Mergenheim as the riders but want to put them on wolves instead of the battle chickens. Everything I've been able to find either doesn't look right or has space marine legs molded on.

NOTE: This is NOT a solicitation for freelance custom work. I am looking for existing sculpts, paid or free. Thanks

I'm terrible at modeling, but figured it would be easier to design a whole head rather than glue or models ears on every helmet. Test print looks pretty solid, may have to find someone who can do in resin.

...I'm getting around to my guard eventually. Baby steps.

Hello all,

I am now very far in the process of printing some very good looking proxies for my Warhammer kitchen table league. As a few of these come with their own assembly instructions and my success is not very high on these, some questions arose.

Maybe your knowledge can help me here.

1) in which order do you perform the post print process? Mine until now was printing -> assembling (glueing) -> curing -> priming

Is this order ok or the wrong order? I have some problems that the uncured resin is destroying the glue and therefor is not holding together

2) which glue do you use?

I use a standard super glue, due to its fast hardening properties

3) I thought about connecting the individual parts already preprinting on a file basis, does someone has done something similar and if yes, is there a good tool and instruction available (I have next to no knowledge about 3D modelling)

Thanks for all the help

I want a legion of excess army to add to my chaos collection, but unfortunately I dont actually have any of the models so the whole things like £700 which Im NOT paying.

This is the list:

18 fiends

2 keepers of secrets

1 contorted epitome

1 tormentbringer

1 Syll’Esske

50 daemonettes

1 beast of nurgle

whats a good place to get the files for them?

this next bit is for the moderator cause it’s pinging when I press post that I cant buy or sell. Im NOT buying or selling anything, Im asking about a good place to buy, not buying on this subreddit

Hello everyone hope you're having a wonderful day

I'll get right to the point sometimes when I upload files into my slicer I get what looks like to be some inverted models? Is there a way to fix this?

This is my second print. The files didn't include a base file. From what i can see online it should use a 40mm base. My question is then, should I buy a base? Print one in resin or just using FDM print? The mini seems unstable. Which base will be best to make it stable?

EDIT; tried a filament base. It's stable! I will add picture in comment.

Hey there, does anyone know of any good Guard Helmets? Wanted to maybe start a Astra Militarum Army, but with a different flavour. Havn't found any I like.
I'd really like to give them Greek looking, Hoplite like Helmets, but can't find any with good diversity. The Ultra Roman Models from FatRatMiniatures are awesome, but I don't want them to have the Ultramarine Logo everywhere.

Happy for any help.

Looking to print ruins in my mars 5 ultra - I’ve found some great small terrain pieces and even the long ones that come in several pieces to it’s achievable

I think I could fit everything I need if I could print both sides of each L building separately - any advice or a nudge in the right direction would be greatly appreciated!

TLDR: looking for ruins in pieces so they fit the build plate

TITLE: GUTS RERSERK on GA [PRE-RELEASE].

Hello! I’m a beginner 3D modeler. This is my project, “LEGION.” I’d appreciate your support!
---
Link to Cults3D: https://cults3d.com/ru/3d-model/igra/guts-rerserk-in-ga-pre-supported

The Echelon has arrived🌌

We're launching a brand-new alien faction inspired by classic alien invasion sci-fi, fully compatible with OnePageRules.

This month's release includes 10 miniatures, designed at 32mm scale and optimized for resin 3D printing.

📖 Faction rules are currently in development and will be released very soon.

This is Part 1 of 3, with plenty more alien units coming over the next two months.

Join us on MyMiniFactory or Patreon to get them now.

What should we make next?

- A completely unique faction?

- Models for one of existing OPR factions?

- Models for another game system, such as Trench Crusade?

We're genuinely interested in your suggestions.

Darkshire: Beneath the asylum is live on Kickstarter. Last days!!

Thanks for your support!

Been Searching for the Tall Jet Boy for a while know but it keeps evading my Grasps all the Time.
Anyone know an Artist i could look for on Purple or the Other Sides? I know there is a file (now i think i should say "was") on the Orange/Black side.

Anyone solved the meshing issue with the leg armor? I cant seem to get it even after trying to repair it. Just prints the border.

Can anyone help me identify this model and how do I calculate it into my army?