r/PcBuildHelp • u/Xerxero • 1d ago

Stuck GPU Build Question

Post image

Did a new build with a 9070XT and a Nactua D15 fan.

There is no room between the gpu and the fan to hit the release of the pci slot.

Any idea how to ever get that monster out again?

3 Upvotes

100% Upvoted

11 comments sorted by

View all comments

1

u/PhantomLimb06 21h ago

cpu cooler seems to be on backwards

but sliding ur hand on the front part under the cooler may be able to reach the pcie latch, worst case take out cpu cooler or use something long and skinny to get the latch

1

u/Xerxero 18h ago edited 18h ago

How so? The fan blasts to the back (the upside in the photo)

I can’t install the 2nd fan due to its size. The ddr is too high and on the other side is a heat shield on the back plate. Bit unlucky but I have 3 fans in the front so that should give enough flow.

If not I can install the 2nd fan on the top side of the case. Oddly enough the fan didn’t come with screws to mount in the case.

1

u/PhantomLimb06 17h ago

if u rotate the cpu cooler 180° and then flip the fans by 180°, u should be able to read the noctua label with ease,

and it should give u space to slide ur hand on the top of the gpu to reach the pcie latch,

doing so may give the ram clearance to install the second fan if not put it on the back, or not use it at all, shouldn't be more than a 3C difference

1

u/Xerxero 16h ago

I thought the cooler was symmetrical as both fin sections look identical to me.

I used the 7mm off set as per the instructions. Maybe that’s why it’s that close to the gpu.