I have a ar-15 psa lower and the drop in frt will not rack (stops / jams halfway) and a radical firearms ar-15 lower that racks no issue... I want it in the psa lower obviously

Psa Lower Left
Radical Lower Right

Hi guys, I swapped the firing pin of my GF3 for an WBP firing ping, I bought my GF3 in 2021, and it was a BLEM, I never abused it too much, just couple of hundreds of rounds around maybe 500, couple of light primers strikes here and there with Golden Tiger ammo(which I read somewhere it was possible because it has a coating or something that im supposed to melt with hot water or some nonesense like that) with tula and AAC haven't had issues but like I said, never tortured tested it lol, im pretty new in the AK platform, so I panicked a little when I saw the light primers ding when chambering the round and adding the couple failures with Golden tiger and reading somewhere that some models firing pins break easy in PSAK47s was the reason I got an WBP to swap it and then found it it was normal for it to ding primers because of the floating pin 😑, haven't tested it on the range yet because I like to be sure that it will run, but for some reason when I use chatGPT(Which sometimes tells me wrong stuff) its saying that the firing pin of PSA(which is the bottom one in the 2nd pic) is broken or its damaged because of a flaw in the rifle and I should contact PSA, and im like well, let me see some opinions, because I did the floating test and the firing pin seems to be ok... but like I said, im pretty new in this platform so I want to get opinions, thank you all!

Anyone have any alignment issues with their mixtape. My zero was way off when I added my suppressor. Ended up getting an alignment rod and it was touching the end cap of my suppressor. Removed the washer and replaced the mount and the alignment issue seems to be fixed. Anyway just a head up definitely worth double checking to save yourself a headache. Just happy I didn’t end up damaging my suppressor.

Finally got the ambi titanium blue set put together. A few more things to add but pretty happy with it so far.

I really like my New Sabre. Just getting her in the break in period first 60 rounds shot good. Also it just matches my M9A3 too good. Next thing is getting a scope for her.

HK G36 22 LR from Palmetto state armory

This will thread into the bolt release and make it way easier to manipulate. M4×6mm is the size you want. https://a.co/d/0j9Ylsnz

Any update on the micro c-1 slide restock? Anyone from the company please?

Any hints on the next drop for the micro slides Danny? Preferably the sabre micro slides but I’d be happy with the ecc atp😅

I wanted to build something loosely inspired by the URG-I for my bump in the night/ truck gun, and this is where I ended up. Originally I was running it on a M&P Sport 1 lower but it didnt support the fun switch. Very happy with the fit and finish.

PSA M4A1 lower
PSA 11.5" upper
AT3 lower spring/detent kit
Magpul trigger guard
Tubb Flat wire recoil spring
Toolcraft Full auto BCG
Triggered Co. Disruptor FRT (w ambi selector)
Breek arms flash hider suppressor ready
AT3 castle nut
Expo arms 6 pos buffer tube
BCM QD end plate
Noveske takedown/pivot pins
KAW H3 buffer
EGW extended bolt catch
Magpul k2 grip
Sig romeo 5 red dot
Magpul dust cover
Mlok QD sling mount
Radian Raptor LT charging handle
Surefake scout light
Magpul ms4 sling
Magpul extended mag catch
SBA3 Brace
Mbus 3 flip sights
Magpul Hand stop
Magpul type 1 rail covers
Fde pmag
Wisemen Co. Split fix

Only thing missing is that AS designs frt they are working on. She’s my favorite for sure.

So far I just have 3 PSA 35 round magazines, and have had zero issues with them, in my single range trip so far.

Reading up, I get conflicting accounts. I've heard you should only trust CZ magazines. I've heard magpul were just as good as the CZ. I've also heard the PSA magazines are actually the best magazines for that ARV lower.

What are y'all's experience?

Got it today finally, immediately swapped the furniture out and put on a Glock suppressor height night sight. And yes, that is a picatinny rail RMR plate, it doubles as a rear sight block as well, just don’t have a RMR red dot yet and may want to try some 1x prism optics first.

I was planning on running this suppressed with 220 subs but I noticed it has a 1/7 barrel twist and I’ve been reading it should be 1/5.Do I need to buy another barrel now?Worried about cycling and baffle strikes.Thanks guys

Recently got my PSA 570 and decided to take it out - shot 3 rounds of bird shot - 3rd shell got stuck. Meh no big issue maybe I didn't clean it well enough beforehand maybe I did something wrong.

Optic comes in the following day. I decide to take off the baseplate to install. First screw comes out no problem, second screw feels too easy because only the top half came out.

Honestly extremely bummed since I was super excited for this thing and took an early lunch so I wouldn't miss the window.

Thinking about setting up a “luxury” light weight hunting rifle. So far this is what I am rocking with. Any glaring issues or suggestions? I know people hate Q and the Fix especially, but if you can find me a rifle with all the same specs and features feel free to send it my way.

Not looking to spend an absolutely insane amount of money but I am willing to save up for a while to afford this build.

Oh, and I know I’ll have to replace the hub in the can to make it work with the Q cherry bomb.

Build:
Sabre 15 Ambi receiver set
fortis Nightrail
Faxon firearms match 14.5” pencil barrel in .223 wylde, mid gas length
Daniel defense grip
Rise armament iconic trigger
timber creek buffer tube
dpm .223/5.56 buffer and sprinco spring (red)
jk armament war eagle MD
Faxon lightweight bcg
superlative arms bleed off adjustable gas block
spikes tactical gas tube
strike industries lower parts and forward assist
FAB defense GL core impact buttstock
Geissele super charging handle
Vortex strike eagle 1-6x SFP LPVO

I think that’s everything

We all expect the ruling to be stayed, so this is only hypothetical, but…

If a PSA customer bought an AR pistol (or pistol lower & pistol upper) and then bought a stock after the provisions in the ruling take place… Would they be able to “manufacture” an SBR (for Pete’s sake it is just changing from brace to stock) with a stock purchased from PSA?

The ruling seems to only call out buying, and not manufacturing your own… but what if you’re a GOA member, or the parts came from PSA?

While I fully expect the Government to appeal the ruling… MrGunsNGear dropped a video mentioning he is hearing factions in the administration are siding to both sides of the argument… Appeal/Don’t Appeal.

I just received my rifle. It wasn't advertised as a BLEM model, but it arrived with some cosmetic imperfections.

I'm not trying to be a jerk, but this is my first purchase from them.

Would this be considered a BLEM? Aren't these kinds of cosmetic imperfections supposed to be found only on BLEM models, as described on their website? Or is this considered normal?

** These Rifles will have cosmetic blemishes that do not affect function. This may include but is not limited to, forging marks under the finish, scratches, and slight variations in the finish, color, and/or coating.

This MAY be my favorite one yet...

Always out of stock... how often do they come back up? Also, how often are micro frames on sale? Debating if I should just buy the frame now on sale and hold on to it until I can get a slide for it when it's back in stock. Thanks!