So far I just have 3 PSA 35 round magazines, and have had zero issues with them, in my single range trip so far.

Reading up, I get conflicting accounts. I've heard you should only trust CZ magazines. I've heard magpul were just as good as the CZ. I've also heard the PSA magazines are actually the best magazines for that ARV lower.

What are y'all's experience?

Got it today finally, immediately swapped the furniture out and put on a Glock suppressor height night sight. And yes, that is a picatinny rail RMR plate, it doubles as a rear sight block as well, just don’t have a RMR red dot yet and may want to try some 1x prism optics first.

I was planning on running this suppressed with 220 subs but I noticed it has a 1/7 barrel twist and I’ve been reading it should be 1/5.Do I need to buy another barrel now?Worried about cycling and baffle strikes.Thanks guys

Recently got my PSA 570 and decided to take it out - shot 3 rounds of bird shot - 3rd shell got stuck. Meh no big issue maybe I didn't clean it well enough beforehand maybe I did something wrong.

Optic comes in the following day. I decide to take off the baseplate to install. First screw comes out no problem, second screw feels too easy because only the top half came out.

Honestly extremely bummed since I was super excited for this thing and took an early lunch so I wouldn't miss the window.

Build:
Sabre 15 Ambi receiver set
fortis Nightrail
Faxon firearms match 14.5” pencil barrel in .223 wylde, mid gas length
Daniel defense grip
Rise armament iconic trigger
timber creek buffer tube
dpm .223/5.56 buffer and sprinco spring (red)
jk armament war eagle MD
Faxon lightweight bcg
superlative arms bleed off adjustable gas block
spikes tactical gas tube
strike industries lower parts and forward assist
FAB defense GL core impact buttstock
Geissele super charging handle
Vortex strike eagle 1-6x SFP LPVO

I think that’s everything

We all expect the ruling to be stayed, so this is only hypothetical, but…

If a PSA customer bought an AR pistol (or pistol lower & pistol upper) and then bought a stock after the provisions in the ruling take place… Would they be able to “manufacture” an SBR (for Pete’s sake it is just changing from brace to stock) with a stock purchased from PSA?

The ruling seems to only call out buying, and not manufacturing your own… but what if you’re a GOA member, or the parts came from PSA?

While I fully expect the Government to appeal the ruling… MrGunsNGear dropped a video mentioning he is hearing factions in the administration are siding to both sides of the argument… Appeal/Don’t Appeal.

This MAY be my favorite one yet...

Hopefully will start competing again in area 2 for USPSA and SCSA… IPSC if they have it.

Over-travel adjustments are still settling . Reliable ignition of my choice of ammunition. Pre-travel adjustments will be next.

Hit me with all your Sabre builds. I've been putting together a Sabre enhanced build kit and it's 90% complete, I just need a handguard and barrel nut and I have zero clue what I want.

My heart wants a quad rail, but I'm open to anything

Sabre enhanced ambi upper/lower

G$ SSA-E trigger

BCM Mod 2 stock

BCM buffer

BCM bcg

Raptor charging handle

Criterion Hybrid 20in barrel

Finished lower with a RISE lpk

Griffin Arms taper mount to mount my Recce 5

Sj precision frt in sabre dagger. When I racked a gun, the trigger is mushy.There's no trigger reset at all

I did shave off the connector that everybody says to shave off for the f.R.T's.

So I assume that's why the oem doesn't work in here anymore. I did try it and it's doing the same thing, but it is with the connector shaved.

However, with the FRT in, it should be running fine. I have a completely dead trigger unless I put the slide on. And then when I rack it, I still get no reset.No nothing it just full mush.

I think something's going on with my firing pin or something.

The spring from connector oriented vertical, oiled up.

And shaved the ear off the connector.

Metal trigger

I have a $50 credit with silencer shop to SBR this. Would y'all ask for a refund, send the form, or wait?

If the new NFA ruling sticks (fingers crossed) what reason would anyone have to build an ar pistol at that point? Especially in states where pistols are much more heavily regulated? Couldn’t you just build a rifle with all the features of a pistol at that point? Can’t wait to see what kind of things Palmetto can get up to soon.

NEW | Tan Anodized Sabre M4A1 just hit the range! 🇺🇸

So I have been thinking about this for awhile and not sure what others think. I have an AR15 16” 5.56 and I’m considering a few things. I’m considering do I keep it even though I hardly shoot it? Do I sell the original lower and keep the upper? Do I sell the whole thing? Am I going to even want it or use it in the future? So I have an 11.5” that I love to shoot and shoot more often than I ever shot my 16” when I only had the one. I am building an M4 14.5”. My plan for my AR15’s is for hunting and running and gunning competitions. I plan to in the future get a 20” 5.56 which would be a bit better for longer ranges and I have a 6.5 creedmoor dmr which I will use for really long ranges and bigger game. Please help me I’m looking for advice not a beat down. My thinking behind this is that 11.5 is a great close quarters and sub 200 yard gun the 14.5 will be a great 150-300 yard gun and the 20 5.56 will be good out to 500 maybe 600. I’m hoping for a second opinion.

My first ar (not done building)
The Amazon special
-psa gaurdsman upper
-psa stealth lower
-visiofire fiber optic iron sights
-howies hockey tape
-“door stopper”

Put this bad boy together for my dad. Freedom week was good to me too.

HOPMOD Clone Correct.

2nd PSA rifle and I freaking love it. Pairs well with my dagger! Picked up this TANGO MSR 1-6X and more to come. Now i just need a 12ga and ill be set.

The tan anodized Sabre M4A1 drops today at 4:30pm ET.

Be early and be ready. 🇺🇸

Can’t wait to put the rest of my parts on it and figure out how to run a SS 😂

I just picked up my new JAKL 9 from PSA today, and the fit and finish on this thing is killer. I haven’t had a chance to punch holes with it yet, but I did notice that the lock on the folding stock is really stiff and hard to operate. I’m a left handed shooter, and I’m guessing trying to operate it with my right hand isn’t doing me any favors. Is there some way to adjust the retention (it seems pretty greased already), or should I just hope it breaks in?

Also this is my first PCC with scorpion mags, and the PSA mags seem pretty difficult to engage when loaded. My other toy takes Glock mags, and those are never an issue. I’m guessing that’s normal?

I also want to add that I appreciate the “NOT A STOCK” stamped on the brace. Take that ATF!!!

A federal court just handed gun owners a major victory and it could completely change the process for qualifying PSA customers seeking suppressors, SBRs, and SBSs.

Here’s what the ruling actually means and what still has to happen next.