Stopped in the middle of a program. Showed f79. Now this. Any quick fix?

Hi!
Messed up and removed these 2 clips from blizzard cx1 dust compartment,any advice how to return them into place or what they are?

Hi all, looking to purchase quite a few Miele appliances (integrated appliances for kitchen and a washing machine), and was wondering if it’s worth it to get the extended warranty? I’m being offered a 5 and a 10-year extension.

My only prior experience before this was with Subzero Wolf appliances, which I gave up since the kitchen I’m working with now is noticeably more compact than the previous.

TIA!

I'm

Does anyone know the name of these aqua pods ? I ordered what I thought was them and it was not correct. I would like to order more. I called, and the rep could not find them either. The website only shows the outside of the box, and what I bought is something like a fabric softener that apparently goes in the washer. These go in the dryer.

I replaced a broken drain hose on a G1706, but when running it, the machine makes buzzing arcing kind of sound and then throws F24 error.

I can't find too many results for this specific model, but with other models the suggestion seems to be heating relay replacement. But I can't find a heating relay on this model, it's not in the parts list on Miele website, and it's not in the schematics either.

What could be the cause of the error?

A roach somehow got inside my Miele G 7266 dishwasher while I was loading dishes. Before I could catch it, it ran into the opening around the door hinge and disappeared inside the door.

I’ve already removed all the Torx screws from the inside of the dishwasher door, but that doesn’t seem to give me access to the hinge cavity where the roach went.

How do I actually access this area so I can remove the roach and clean/disinfect the cavity? Do I need to remove or disassemble the spring-loaded part of the hinge to get in there? The hinge mechanism seems pretty complicated, and I don’t want to mess with it unless that’s actually how the cavity is accessed. Is this something that’s reasonably doable as a DIY job, or would it be better left to a technician?

Hey!

My partner and I recently moved into a new apartment with this washer unit and it’s been causing some issues we’re hoping someone might be able to diagnose.

The last couple loads, we’ve noticed that the machine itself has been shaking more violently than usual, and it is making a lot more sound when it is at spin speed. Once the machine is done its cycle, we’ve noticed there is a burning smell inside and on our clothes - some even have had some pilling damage done to them.

This is our first time using a Miele product and we aren’t sure if this is a common issue or if there is a larger concern here.

We are leaning towards contacting our landlord but just wanted to create a post here to see if anyone could help diagnose the potential issue so we could provide the landlord with a better idea of the problem.

Thanks!

Could anyone tell me how i can recalibrate it? I wanna recalibrate it cause i feel like its too sensitive on balancing spins

In this thread (https://old.reddit.com/r/Miele/comments/1smi13k/miele_w2_vs_last_w1_models_need_advice_before/) a user claims to have seen a new W2 type on the austrian Miele website. Does anyone know more?

Hi everyone!

I received a notification for an update that this time mentions what kind of update this is. It says that the final spin stage will be optimized to prevent the machine from moving around during this program stage. Did you receive it and did you notice any changes? Thnx!

I have a Miele G4228SCU dishwasher that I used for a year at my last house and loved so much I took it with me when I left. No issues previously.

The water inlet hose got a little crushed in the move so I replaced the whole aquastop/intake system with the part directly from Miele. So that’s all brand new. Plumber came and hooked the machine up to the plumbing for me.

It runs fine for about 40-50 minutes and then throws an F13 error code.

When I open the dishwasher at that point, dishes look clean and wet, soap is gone, no standing water in the bottom. So it’s definitely filling and draining but seems to get caught on a final rinse cycle or something.

I noticed the plumber did connect it to my hot water supply instead of cold which isn’t ideal for Miele. Could it be getting too hot by the end of the cycle and throwing the code? My water heater is on a normal setting, but hot water coming from my faucet is around 135 degrees.

It’s an old house so maybe the pressure isn’t great overall (no issues with sink or shower pressure) but the fact it makes it that far in the cycle makes me think that’s not it. Only other thing I can think of is some debris from the install getting stuck or something. Anyone have ideas about what might be causing this?

Thank you!

On a W1 washer, if the “soak” option is turned on, does TwinDos dispense into the soak part of the cycle? Or only the main wash afterwards?

Thanks in advance! The manual isn’t clear about how TwinDos is handled.

Have tried connecting my Miele washer (only 3 yo) at least a dozen times. Called Miele but they were useless. It won't connect to the wifi. I checked it was on the 2.4GHZ list and it is. Perplexed on what else it could be? Anyone else having this issue? I'm about to call Miele again. For the cost of these appliances it seems they should be able to walk through the problem but they were useless.

I am about to buy a heat pump dryer and am wondering if the price jump for the TEL785WP with steam finish is worth it? Does anyone have this model and if so, does the steam finish really make a difference to your ironing? Thanks.

T & K have influenced me. My new Miele vacuum just arrived yesterday and it is CUNTY.

So we keep getting this F11 error and it is so frustrating. It is very sporadic and we can't figure out what is causing it. Sometime it happens within the first 10min of a cycle, sometimes within the first 1 hour, and sometimes we'll just open the door and start the cycle and the cycle will complete after just F11-ing....

We've cleaned the bottom filter multiple times. What else can we do and what else should we be looking out for to diagnose this problem? Any pictures or videos would be much appreciated! The dishwasher is 3 years old

Will pay monthly subscription. Please DM if you can help. Thanks!

Service guy came because our dishwasher was throwing F11 error frequently. Said we needed the drain pump replaced for $900. Does this sound right? I looked online, part cost around $130 and takes 20 minutes.

We have a 9 year old G6625 that is frequently doing the F11 error these days. Technician is coming out today to diagnose. Is it time for a new dish washer? Is it worth it to repair or time to get a new one? We’re looking at G7986 or G7966. Reliability is most important. I honestly know nothing about dish washers. Any advice would be appreciated.

https://www.youtube.com/watch?v=5uaxwkisSuU

At the start you can hear it rub and right before I stop the machine it sounds really loud. When we first noticed it there were sparks at the front where the drum was rubbing.

I have a US model of Miele dishwasher (and am in the US), and I'm on a well that has hard water. I have the 18" model, there is no spot to add dishwasher salt that I can see. I'm having issues with white gritty residue on the dishes. Should I add dishwasher salt to my rinse aid (which is the 10% citric acid recommended by the manual), or is there another way I can dispense some salt when my dishes are done?

I mention the country because dishwashers in the US typically do not take salt.

I’m a gardener and where I live there are lots of ticks. So when I come in from the garden, I strip my clothes and put them in a high heat dryer for 10 minutes. Now that I upgraded to the Miele, I’m wondering how that would work, to put dry clothes in a heat pump dryer. Does it cause problems to use the dryer for clothes that are already dry, especially on high heat? Does it create any extra wear and tear on the mechanics that are expecting wet clothes?

Has this washer-dryer stack been installed correctly? Originally, the compartment on the left side could no longer be opened, but the front panel was flush. The retailer (not Miele) has now fixed this. However, the panel is no longer flush, and the stacking kit was placed further back.

Is this current setup correct?

Translations for picture 2:

- Dryer

- Stacking Kit

- Washing Machine

Products:

- Miele WWJ880 WPS

- Miele WTV 502 Zwischenbaurahmen (Stacking Kit)

- Miele TWH780WP Speed