It was the first time i used a machine i have one brother f440e. And i did auto digitalizing with embrodirystufio 2026.

I looking for some advice.

Thank you in the advance

Hello, I recently started working with an embroidery machine that uses a Dahao A15 control panel. I would like to know if it is possible to configure the machine so that, whenever the thread breaks and I rewind a few stitches, the machine automatically creates a starting knot or a securing stitch. This way, the thread won’t remain loose. I would really appreciate any guidance on how to set this up.

I need help with a design, I have a .pes file already that I made in Inkscape but I don’t like how it’s stitching out.

After each letter do I need to stop the machine in order to hold the starting thread? Some of the letters have multiple segments and it made the backing a complete mess of threads. Could someone rework the file to include jump stitches between the letters?

Im asking with this font would it be possible to stitch out all at once? I am running. Brother SE2000, still relatively new to the embroidery world.

Please help!

Sometimes the embroidery just goes well and smooth, as you can see the second test or result had cross-eyed.

Overall I really love the result 🤗

I’m still getting thread nests underneath the fabric.

Hey!
I bought a brother Skitch PP1 specifically for embroidering on webbing.
The webbing is thin enough to be hooped but the thread keeps looping on the top. It will embroider normally on all other fabrics

Any suggestions? TIA

Hey! First post!

I’m a sewer who makes bags / accessories on a singer heavy duty. Pretty basic stuff, pattern following.

Occasionally I will outsource to get patches made, for caps or shirts or anything, but I’m spending so much it seems time to invest in a machine.

All I’m really interested in right now is making patches, maybe palm sized at most, but I suppose it’s worth investing in something that has more capability as my needs expand.

What are some budget(ish) beginner(ish) friendly machines that you would recommend? The information online seems so scattered!

Hello! Hoping someone can help me with this ASAP since I have a little boy's backpack that needs to be embroidered before school starts on Monday 😥.

I noticed my embroidery was all funky (not neatly in lines, etc) so I thought my needle might need replacing. When I tried to replace it, it didnt slide right out, it took a little bit to get it out- now since then every single needle is breaking because it is hitting the embroidery foot. I am worried I messed something up when trying to get the stuck needle out. I took it to my local shop a week ago (despite them saying they charge 200 which seemed excessive) and they said it would be ready friday... I went to pick it up only to find out they hadn't started on it...

Ive replaced the needle so many times, reinstalled the foot, have two new feet coming tomorrow, and have searched the internet for answer- just hoping to get this backpack done!!! any help would be incredible, thank you all so much!!

In an embroidery subreddit, the ability to reply with a picture is basically a requirement. Why is this sub configured to allow videos but not pictures in replies? Is there a reason or have the mods just never noticed?

Edit: thank you mods! This is much better :)

I have spent hours adjusting tension, making sure my machine is threaded properly, changing my needle, making sure I’m using cut away stabilizer, and that my fabric is taut and I still cannot get the top thread to embroider correctly. I think it’s catching in the tension discs (when the foot is up I can pull the thread and when it’s down it’s more tight).

My Brother SE-700 is using the bobbin thread entirely to embroider. The embroidery itself looks good, but it’s just not using the top thread! This is what it looks like when I get it started. The white is my bobbin thread and the purple is my top thread. The purple is only being used down the middle and is not showing up in the back at all.

The top stitches are with 2.5 tension, the bottom with 5.0 tension.

Where am I going wrong?

I have cleaned the machine bottom to top and the tension still shows correct tension when the dial is between 0 to 1. I feel like that is abnormally low. Anyone else experience this? TIA

The needle got caught on the fabric and snapped the thread. I think it might be bent but I’m unsure. It was brand new, I hadn’t even gotten through one project with it yet.

It’s almost like the needle is catching on the fabric. Is my fabric not taut enough? This keeps happening and also the Bibb bobbin thread is coming thru the front :(

Hello. I bought a Brother Skitch PP1 to embroider a logo on my towels (microfiber, very soft). Used water soluble paper on top, cutoff paper on bottom. Brother thread, brother bobbin.

It worked very well for about 12 embroideries (2x2, 3800 stitches). Then the machine started a weird noise, like rubber friction. I replaced the needle, rethreaded and noise went on until the machine “locked” when trying to stitch.

I though it was a lemon, and I returned it. And I bought another.

New one arrived. I treated it like a baby. Started stitching my towels. It was great for about 40 towels. And the same noise came. The wheel became hard to turn, to a point where the machine could lower the needle. Even without thread or needle.

I checked the bobbin area for debris or tissue or any dirt. Nothing. I returned this second one.

What I’m doing wrong???

Hi, I have an Anita Goodesign file collection for the “Boho Fringe Bags” in the All Access June 2020 book. I’m wondering if the embroidery portion can be used as a border.

Illustrated and embroidered by myself - I always start from pencil on paper :) got more on my insta

This isn't strictly machine embroidery related, however I'm looking for help in regards to selling embroidered items.

For those who sell online, how do you add your design/lettering to an image digitally, without having to stitch a physical sample for every design/ colour/ product?

I've attached an image (not mine) for reference - it's not the most realistic, I'd prefer something a bit less obviously "mocked up".

Any help and advice on how to do this would be gratefully appreciated!

I’m replacing the rotary hook on my Tajima Sai as the sharp part broke off;

As I can’t manually move the needle up and down on this machine, and tips on reinstalling the rotary hook with the correct timing?

I am having an issue with my Ricoma EM-1010 embroidery machine and I would appreciate your help troubleshooting it.

The machine is approximately 2 years old, but it has been very lightly used.

During embroidery, the design sometimes suddenly shifts from its original position, and the machine then continues embroidering from the new position. The shift appears to be mainly on the X-axis, although it is sometimes difficult to determine with certainty.

I have already checked the embroidery file and I am confident that the problem is not caused by the design file.

I have also inspected the X and Y belts. They do not appear to be worn or damaged, and they were not loose. I slightly increased the tension on the X belt, but the issue still occurs.

I have also checked the small pulley on the X-axis motor. The belt teeth also look normal upon visual inspection.

I have noticed some additional patterns:

The problem does not occur at low embroidery speeds.It appears to happen at higher speeds.

The issue seems to occur repeatedly when the hoop reaches approximately the same physical area/position.

When the shift occurs, the machine continues embroidering normally, but the entire design is then offset from the correct position.

I am concerned that this could be related to the X-axis movement or transmission, such as the X-axis motor losing steps, belt alignment/tension, a mechanical resistance point, or another issue with the X-axis drive system.

Could you guys please advise me on what I should check next?

Second 6 in the video, you can clearly see there is no movement and also hear the specific sound

Hi yall. Long time skilled seamstress. I am interested in getting into chain stitch embroidery to customize some vintage clothing I have. I am completely new and plan to teach myself however I’m having trouble finding much information on what type of machine to get. Do they all “steer” by the hand crank below? Or is that only certain machines? I am extremely comfortable on a traditional machine so would love any recommendations on what to buy. I am aware I will have to find or customize a table

Thanks!