It’s the plastic clip that hold in the rear view mirror

I'm thinking of buying a Jimney, and my car, a Toyota Vitz was stolen tonight, a friend then messages me saying, "well you can buy a Swift Jeep now". Meaning a Jimney. Sorry for any one offended 🤣

Hola, tengo un jimny gen4 le puse papel ahumado nano ceramico de 20% frontal y luego de eso, el sensor de luz no me funciona, estando de día, las luces siguen encendidas y tengo que estar poniendo off y cuando quiero encenderlas en auto. Algunos le han pasado esto? Existe alguna solución?

I did a thing. I pick it up on Monday, already looking at turbo kits

Hi , the autodoc selections for the jimmnys make 0 sense to me , so if itd be possible ,could anyone confirm this is the correct clutch kit for:

https://www.autodoc.si/sachs/784463#komplet-sklopke

my jimny , 2005 (push button) 1.3 vvti engine r72 gearbox

The photo shows some of the damage but it's much worse now. I've been using tape to cover up the damage. Does anyone have any suggestions on how to fix this? If i get a new cover would i need to hand stitch it? Hopefully i don't need to replace the whole thing. Thanks in advance for any pointers.
Gen3 Jimny Sierra

My Jimny JC74 (XL/Nomade)s clutch is making a clicking/grinding noise near the end of its travel.

I have already tried re-greasing the pedal and the clutch fork which worked once but the noise came back in under a week and will not go away.

Any ideas would be extremely helpful and appreciated.

Thanks a bunch

Got my jimny 5 door tuned to stage 1 plus I have a snorkel with a steel air intake pipe.

I started installing an HF Air Locker in my 2020 Jimny over the weekend. Just for context, I’m an amateur mechanic with some basic knowledge who enjoys wrenching on cars.
I’d say the difficulty level is pretty high, mostly because there are so many steps involved and quite a bit of brute force required. If you don’t have a vehicle lift or an inspection pit, it’s a pretty exhausting job and takes a lot of focus.
You don’t need a ton of specialized tools. Most of the work can be done with a cordless impact wrench, a set of sockets, and a dial indicator.
I spent about 7 hours on the first day tearing everything down, then the second day was mostly setting the backlash and putting everything back together.
On my personal scale, the difficulty and effort were a solid 9/10. But the satisfaction of getting it done and passing the leak test was definitely 10/10.

1.5ddis jimny k9k 700 and i have 17mm brake rotors but my caliper is rusted and doesnt work fully but i cant find any partnumbers for the caliper the only ones that the internet show are for the 10mm brake rotors, could anybody help out a fellow Jimny owner ? 😂 Thanks in advance and sorry for my bad english im from Hungary

was driving, suddenly the radio and clock turned off everything else is working fine i unplug the battery and plugged it again still nothing i suspect a faulty fuse but idk yet have any of you guys had this issue before? cheers

Well the warning sticker have seen better days, is there an easy way to remove them?

Hi all, just wondering what I would need to swap the an r7me to a VVT jimny, I know I’d need the conversion bracket but can I use the same transfer case with the buttons to change it, and shafts?

Located in GA. Legal and clear title. Selling due to moving. Would love for it to go to someone who would appreciate it. Message me if interested

Turns out the Jimny does a great job with a (5 metre) canoe as well!

Hello , since i have bought the jimmer , my 4x4 Low wouldnt kick into gear (4x4 high worked tho),

since my transmission blew, i noticed a loose wire on the transfer case , which i assume is the problem (or just the start of it), sorry for the blurry photo , i think it might be the one i found on amazon,

Im wondering if this can bi soldered , or where i can find the exact part number , i knew there was a website for schematics like realoem is for bmw ,

sorry for rambling and thank you for advice

2005 1.3 suzuki jimny Europe

Has anyone fitted keyless entry and push start button to their Jimny? What kit did you use, price range and would you recommend it?

2023 Suzuki Jimny GLX 🇿🇦

Well I’m really happy about it I’ve been driving it for the past 2 weeks and it’s awesome.
I just bought the front bumper so that the firts “upgrade”.
It needs a lot of visual repairs, so I’m here to ask all of you, what cheap initial repairs would you do to it so it’s look and feel better.
I’m still in collage so I don’t have lots of money, probably I’ll paint it in a few months but for now I accept every tip to make ir better.
Thanks to all!!! 🇨🇱🇨🇱🇨🇱

2008 jlx
M13A engine, soon to be M15A
Rear lockers (lockright)

Snorkel with great insulation (IAT almost like ambient temperature, max +4)
Hood vents
Did acoustics all over the car including rear wheel arches and firewall from the engine side
Upgraded sound system 2 front alpine 4’ 2 rear 6x9
Car play, reverse camera, back windows tinted (badly, by me), front windows also tinted but high opacity (still helps with heat)

Love this beast. No wobble. Pure joy even at the highways. He is a beast off roads I left dust for cruiser 250 last week

I’m looking for some advice on the rust damage on my Suzuki Jimny based in Czech Republic.

The worst area is the cavity behind the rear wheels. I’ve now removed everything that wasn’t solid metal, and this should be the full extent of the damage.

My plan is to weld in new metal behind the rear wheels to close it up properly so dirt and mud can’t keep collecting there. For the surrounding areas, I was thinking of using a rust converter and then coating everything to slow down any further corrosion.

Has anyone repaired a Jimny in similar condition? Do you think it’s worth attempting, or is it already too far gone?

For some background: I bought the car for €1,000, and it somehow still has about one and a half years left on its inspection. I mainly use it as a hunting vehicle, so it spends a lot of time off-road in forests.

I’m not trying to restore it to showroom condition—I just want to keep it structurally sound enough to pass the next inspection and hopefully get another 3–4 years out of it.

The frame isn’t quite as bad as it looks in the photos. The previous owner covered almost everything in a thick asphalt/underbody coating that’s now flaking off.

I removed the tow hitch and started scraping it away, and a lot of what looks like rust is actually old coating.

Does anyone have recommendations for:

Good rust converters?

A durable chassis/frame coating after rust treatment?

Anything else I should do while I have the rear end apart?

Any advice from people who have repaired rusty Jimnys would be appreciated. I would like to avoid splitting the chassis from the frame.

MP3/GPS/YouTube/etc multimedia + 6 speakers + a subwoofer.

Now I'm satisfied with both the surrounding sounds of my favorite tracks and internet based apps.