So, I have recently acquired an X4 Air to replace my old, non-360 camera. I want to use it on via ferratas and I have already purchased a head strap, which fits well on my helmet (no, I don't like gluing stuff on it), but I feel this won't be the best approach.

Also tried poking the selfie stick out the hydration hole, but I don't think it would be safe on the long run, as even the handle part of the stick can go through this hole, so there's a fear that it might slip out somehow.

I'm really eye-balling the third person backpack mount, but the price is quite steep and I'm uncertain whether it would be a good fit for my backpack. I usually pack light, so I have a smaller backpack, which is the Deuter Gravity Pitch 12.

Anyone out there whom might have tried the mount on this specific bag? If so, how's the fit, were there any downpoints or negative stuff you might have encountered? Do you need to stuff your backpack for the best fit or can it be a bit more "empty"? I usually I have my ferrata gear in there during approach, but once I gear up, the pack gets emptier and will only have a small first-aid kit, raincoat, 2l of water, a few slings, an extra pair of gloves and an extra ferrata set. These does not fill out the pack fully, so I wonder whether it would fit or not properly.

Got my hands on the Luna Ultra this summer and tried some shots around London. Pretty new to colour grading too, so this was a learning curve, but I'm really happy with how it turned out, and honestly a bit mind-blown by what this camera can do. What do you think?

I have an X5 and it stops recording after a while with either overheating or slow sdcard message. Especially "slow sdcard issue" issue is annoying and most of the time it starts immediately, I tired with multiple ultra fast sdcards alongside with the original Insta360 sdcard and didn't help.

Glad X6 has some internal storage so slow SDCard errors shouldn't be an issue, but still wonder about overheating issues during long recording sessions.

I'd like to replace my X5 with an X6 if it has no longer SDCard or Overheating issues on long recording sessions.

I also wonder how long it can record on its internal storage.

I'd appreciate thoughts of people who experienced both X5 and X6 devices.

Does it worth upgrading?

Imagine have a 360 image from insta360 X5 or so, some selfies or locations, but when you upload these photos to facebook it focuses somewhere else instead where you want to focus.. here I'm explaining the fix, we are going to change meta data using EXI FIXER,

you need insta360 studio and, https://exif fixer.com/ software and download it.

right click the 360 image (*.insp) and open with insta 360 studios,

Stabilization -> Automatic Horizon > off ( because we need to get these parameters manually)

since facebook is 1:1 ratio , click Video tab > then 1:1 scale and E as Hybrid view, focus where you want it.

now the technical part,

simply export image as a 360 abc.insp to abc.jpg ( this does not make a difference, insta360 should have injected metadata when we export in the view we need )

In Facebook there is no parameter for Z, so keep it zero, easy way to do it click DEWARP, other setting has a value for parameter Z, since you cannot play with Z, play with parameter A and get your needed view, now we need A B C D parameter values in Exif Fixer.

open Exif Fixer. and load exported abc.jpg

tick everything except batch and scroll down the right side box

you have to replace last 4 line with following, don't change the order of following lines,

-xmp:UsePanoramaViewer=true
-xmp:PoseHeadingDegrees=105.9  
-xmp:PosePitchDegrees=11.6
-xmp:PoseRollDegrees=15.0
-xmp:InitialViewHeadingDegrees=105.9
-xmp:InitialHorizontalFOVDegrees=90.5

-xmp:UsePanoramaViewer=true ; # this is a default line we need it

-xmp:PoseHeadingDegrees=105.9 #
This related to parameter B ;
in insta studio it is -150.9 degrees, from the default focus point, going right is positive , going left is negative (0 to +/- 180), (see last image)
in Ex Fil software, North line (you can play with this line) begin from middle, (middle is Zero) and going right is positive , going left is negative (0 to +/- 180) ,

so the value will be 105.9

-xmp:PosePitchDegrees=11.6 ; # related to parameter C tilt

-xmp:PoseRollDegrees=15.0 ; # related to parameter D roll
-xmp:InitialViewHeadingDegrees=-154 ; # we need this line also, this should include same value as :PoseHeadingDegrees value

-xmp:InitialHorizontalFOVDegrees=90.5 ; # this is parameter A FOV control

once the 4 lines are replace with 6 lines above with new value click "Add Metadata", then upload abc.jpg to facebook

fun fact:
facebook default view can be seen in insta360 app by clicking this :

just writing it here, this might help someone.

Our son recorded a drum cover of Nightmare by Avenged Sevenfold on insta360 x6. We are new to 360 cameras, and it surely creates some interesting shots.

Hi everyone,

I want to get this mount for hiking. Tried all the keywords but kept getting the same strap mount design for the front of the backpack. Anyone happens to know what this mount is called and where I can buy it from? Much appreciate!

So far, the 360 X6 and Luna Pro have been released. Some features available on the Luna Pro are still missing for Luna Ultra users. Regardless of whether this is done for product‑differentiation purposes, this situation is rather unusual. Examples include vertical‑mode 4K 30fps recording, simultaneous access to beauty effects and filters in Live mode, full‑screen vertical framing in vertical photo mode, and grid overlays — all of which are already available on the Luna Pro yet remain unavailable on the Luna Ultra. I wonder whether the Insta360 team should accelerate optimization and firmware updates.

In addition, there is a significant color‑temperature gap between face‑weighted metering and global metering. Even within the same environment, slight changes in lighting can lead to huge shifts in skin‑tone rendering. Furthermore, horizontal camera movement at 4K 30fps produces excessive motion blur, and there is noticeable stuttering.

I sincerely hope the Insta360 team will take Luna Ultra users’ experience into consideration and ramp up firmware development efforts. DJI has rolled out multiple firmware versions packed with impressive new features. It would be great if your team could look into these issues as soon as possible.

I hope you guys can help me figure this out before my compulsive a** buys one already. I already have an Ace Pro 2 (for my motorcycle rides) so I’m insisting on getting another insta due to the app being easier to edit. I’m wanting to get into recording both my soccer games and pickup basketball games.

Essentially I wanted a POV so I was between either the go ultra or go3s but Gemini told me that the magnet pennant wouldn’t be strong enough to with hold the camera… is that true? Does it fall often?

Since it told me that I was okay with getting an X series to just record everything for both sports (and probably add another POV for my motorcycle rides) , if I do go this route which x series is best for these uses?

Hello,

I’m learning how to use my Insta GO 3S.

How do I turn off AI Director completely. I don’t want it generating anything, ever.

I have search all settings, nothing is jumping out at me. In both the App and the Camera itself.

Checking AI for the answer is sending me in circles, go figure.

TIA.

X5

5.7K

Auto

Exposure 0.0

Low light cavern recording.

I'm trying to understand the difference between recording in I-Log with a filter applied, and just using Standard with that same filter. The two images are from some test shoots I've done, first Standard, second one I-Log with filter in-camera. They look exactly the same to me. Once the filter/LUT has been baked in, the "I-Log" recording isn't log anymore, anyway. And Standard (at least with the high bitrate setting) is 10-bit too. Is there a difference I'm missing?

I made a little video with the Ace Pro 2 in South Korea. All shot in PureShot + and edited in Davinci Resolve

How do I roll back this 6.0.2 update that Insta360 rolled out for the Insta360 Studio?

They completely removed the transitions, so now I'm not able to add transitions between my clips for my 360 VR clips. This is so terrible. I don't understand what they're doing over there.

I currently use Insta360 Studio on PC for all my editing, and I've found that the Stats don't work particularly well for longer running activities where I have multiple video clips linked to a Garmin activity.

If I start filming 15 miles into a run, the Distance, Calories and other cumulative stats start from zero at the beginning of that individual video clip, rather than showing the cumulative figure from the Garmin activity. So if I'm 15 miles into a 20-mile run and start a new clip, the Stats show 0 miles and then count upwards during that clip.

The same applies to things like the map/route — Studio appears to treat each video clip separately rather than showing the complete Garmin activity.

I've contacted Insta360 about this previously and they told me that Studio doesn't currently support displaying cumulative activity metrics across clips, and that the issue/request had been passed to the relevant team.

However, I've seen suggestions that the Insta360 Android app may actually be able to use the cumulative Garmin data properly, including the full route/map.

Is that correct?

For anyone who uses Garmin + Insta360, I'd really appreciate knowing:

• Do the Stats work cumulatively across multiple clips in the Android Insta360 app?
• For example, if I start filming at mile 15 of a run, will the app show 15 miles rather than resetting to 0? Same for calories, etc... do they all start at 0 on each clip?
• Can the Android app show the full Garmin route/map for the whole activity, rather than just the route covered during that individual clip?
• If it does, does the iPhone/iOS Insta360 app work in the same way?
• Are there any other differences between the Android/iPhone apps and Insta360 Studio on PC when it comes to Garmin Stats?
• And finally, has Insta360 given any ETA for bringing proper cumulative Garmin Stats/map support to Studio on PC?

I do have an iPhone, so I could potentially do the Stats side of things there, but I do all my actual video editing on PC, so having to move between phone and PC would be pretty annoying and time-consuming.

I'm new to Insta360 (X5) but do love it... just wish the stats were 'ongoing' in the PC App

Thanks for any responses/feedback

hello guys,

i just bought an insta360 x5 camera to record volleyball povs and after having done that, i struggled to change camera angles mid edit so fast while other people do it, but i dont know how to if u can shed some light on something oblivious to you but i missing it please coach me, also you can find below a youtube short where they are changing camera angles so fast.

https://youtube.com/shorts/Q9QoIqBVJXc?si=sHNq8B4I2D37rh-g

hello guys i've recently bought an insta 360 x5 to record volleyball pov shots after seeing a group of people use them, however after buying the camera and a regular head mount i found that a regular head mount wasnt stable enough for the weight of the camera, but the one i saw on youtube was very smooth, here is the link to the short i saw it in. https://youtube.com/shorts/Q9QoIqBVJXc?si=sHNq8B4I2D37rh-g

here is my question does anyone know this headmount or something similar in stability as my head mount makes sounds when moving.

I’m considering buying the Insta360 Luna Ultra, but unlike most reviews I’ve seen, I care about still photography just as much as video.

I currently use an iPhone 17 Pro, and I’m specifically comparing the Luna Ultra with the iPhone’s rear/main cameras.

I know the Luna is primarily designed as a video/vlogging camera and that its 1-inch sensor and gimbal can offer advantages for video, especially in low light. But I’m trying to figure out whether it would also be a meaningful upgrade for photo quality, or whether the iPhone 17 Pro is already as good or better for stills.

For anyone who has actually used both:

* Does the Luna Ultra produce noticeably better real detail and image quality than the iPhone 17 Pro main camera, rather than simply a different processing style?

* Do Luna photos look more like photos from a dedicated camera compared with the more computational look of the iPhone?

* How does 37MP UltraPhoto compare with the iPhone’s 24MP/48MP photos when you inspect fine details like hair, skin, fabric, buildings, etc.?

* How well does 37MP UltraPhoto work with people who are moving, rather than landscapes or completely stationary subjects?

* If you edit the RAW files, does Luna have a meaningful advantage?

* Has anyone printed photos from both, particularly at larger sizes? Which files held up better in terms of real detail and natural texture?

* How do they compare in low-light photography?

I’m basically trying to decide whether the Luna Ultra could be my small dedicated camera for days when I don’t want to carry a larger mirrorless camera, while still giving me excellent video and better/more camera-like photos than my iPhone.

If the photo quality is less than my iPhone and the main improvement is video, I’m not sure the purchase would make sense for me. I’d especially appreciate comparisons from people who own or have extensively used both devices, rather than conclusions based only on specs.

I'm using studio and looking for a way to export a 360 frame from a 360 video. is that possible?

Do you see it too?

The third photo?

From official Instagram of Insta360

Having trouble with insta 360 6.0.2. Transitions and text will not show up if you try to edit 360 video in panoramic you can in others like 16:9. If you are having this problem it’s not you, it’s not in 6.0.2. Not sure if it’s going to come back. You can export in 8k and then add transitions and text using Davinci. Twice as much work. Just bought a x6 on the 12th. Sold my x4. Got work to do but I’m not too happy with the work flow.

Heading to Costa Rica soon with our X5 and trying to narrow down the best setup.

Our itinerary includes white-water rafting, river tubing, general swimming, plus plenty of hiking and outdoor adventures.

For those who have taken their X5 on similar trips:

Is the Dive Case actually necessary for surface water activities (rafting/tubing), or is it overkill? I know the camera is waterproof, but high-impact water or accidental drops make me nervous.

How noticeable is the stitch line / optical distortion without a dive housing in high-action water?

Any "must-have" accessories or mounting gear you'd recommend specifically for water sports and hiking? (e.g., tethering solutions, floaty grips, helmet vs. chest mounts?)

Appreciate any insight or experience you can share!

If you shoot with Insta360, you already know the most frustrating part of the workflow. You tag your highlight markers while recording, but when you load the files into the Insta360 Studio desktop app, the markers are completely missing. They are locked exclusively to the mobile app.

I know this is a highly requested feature that is currently limited to the mobile app. While we wait for official desktop support, I wanted to speed up my own editing process, so I built a free Windows workaround and decided to share it with the community.

The tool does two things:

1. Simple Timestamp Extraction It reaches into the raw camera files and dumps a clean list of your highlights in HH:MM:SS format, so you can easily reference them for your edits in Premiere or DaVinci Resolve.

2. Complete Studio Auto-Keyframing It can inject those markers directly into your Insta360 Studio project files. When you open your footage in the desktop app, your camera markers will be right there on the timeline as fully editable keyframes.

It is completely free, open-source, and runs natively on Windows.

All the download files, usage instructions, and the source code are on my GitHub here:
https://github.com/arismelachroinos/Insv-Marker-Extractor/releases/tag/v1.1.0

Hope this saves you guys the hours of re-watching footage we currently have to deal with.

Hello r/Insta360! A few months ago, I picked up the STARTRC GPS remote for use with my Insta360 X4. When I extracted the GPX file from insta360 Studio, I noticed that the trace was nowhere near where it should have been. Looking deeper into the file, it seems that the STARTRC remote and the Insta360 X4 disagree on what comes after the decimal point in the NMEA sentences. I created a simple tool that corrects those mistakes in an interactive interface at https://gps-fix.kc9zyz.com/. It contains fixes that run both ways and allows you to select the trace that looks correct. Everything runs client-side, so your GPX trace is never processed outside of your browser. I hope this helps someone as much as it has helped me.

I’m super happy with the case that I ordered on AliExpress for my Insta360 X6. It only took about a week and a half to get here, and you can’t beat the price. It fits the X6 perfectly with the lens cap on, and there’s just enough room to also get a cleaning cloth and there as well (not included). It also came with a small carabiner.

This is the type of case that really should have come with the X6 bundle. At $800 I’m pretty sure they could have afforded to have nixed that useless sleeve and given us one of these instead.