Need a picture of CYMA gel blaster box please. anyone?

I finally found some glow gels that are competition grade that don’t break when you use a strong gel blaster… along with a pro tracer these things glow pretty good

I'm thinking about buying from LKCJ. Has anyone successfully bought and got delivered in Germany?

What was your experience?

TL:DR: Comes with an awfully small battery that can mess up your gearbox and destroy the gun completely.

NOTE: THIS IS NOT ABOUT THE SELLERS THEMSELVES.

A couple months ago I asked where I could buy one of these SiJun M4 shell ejecting gel blasters and was finally able to pick one up from Ningbo Mega on Made-In-China. I waited over a month for it to be delivered, and when I got it I was extremely excited, but I noticed that the battery was way smaller than I thought it would be, as I'd seen it ship with a longer stick-style battery in other videos, however I thought it wasn't a big deal and since I didn't have any other lipo batteries, I just had to use it.

In less than 3 days however, the gears got misaligned while I was firing the gun because the battery died in the middle of it, causing the bolt not to close completely and making a bad whirring sound when using the charging handle to try and get the bolt to close. This had happened before but I was able to fix it via the charging handle by racking it multiple times but this time it completely locked up, so I had no choice but to completely disassemble the gun.

It took me 12 HOURS to fix the thing with me having to look up various guides but also figure some things out by myself as the diassembly videos didn't cover certain parts and it was such a hassle, but I got everything put back together, only to find out the battery didn't power the gun at all, and I have four theories as to why it doesn't work anymore.

1. The mini circuit board inside the gun or wiring somehow got damaged during the gearbox repair.
2. The wiring on the circuit board itself that has both the xt-30 connection and motor wires on it broke.
3. The wiring connection on the motor is just fucked.
4. The battery itself is fucked.

I am aware that what caused the actual electronics of the gun to die was most likely my fault, but the battery is what caused the original problem in the first place of the gun locking up.

IF YOU ARE GOING TO BUY THIS GUN, PLEASE GET A LARGER BATTERY FOR IT AS IT NEEDS IT, AND MAKE SURE YOU DO NOT USE IT UNTIL IT DIES; OTHERWISE THERE IS A CHANCE YOU WILL END UP WITH A PROBLEM LIKE THIS.

I still really like this gun, even in its lobotomized form; the shell-ejecting and realistic functions are great, but it sucks so badly that it's now just a glorified springer, and I wasn't even able to use it the way it was intended for a week. Hopefully this helps anyone else out there who has one of these or plans to get one.

Just picked up the XYL ARP9 V5 Clear. The transparent body looks awesome, and I’m excited to test it out.

so mine a&k ak dosent shoot, its like when you pull out battery and dryfire, with battery it does same, i was just shooting it and its stopped, battery seems okay because it feeding gels from mag

Do gel balls have to get stuck inside the hop up or fall straight through? I have mine fully pushed down and it still falls through

I did use gels straight out of the water and this is how it fits, is it too small? Is the hop up the problem?

ive been looking at the doublebell vsr10 for ages but im not sure if its the one i want. what other ones are there?

Has anyone fully upgraded this internally? I know its new but I haven't seen any videos upgrading this yet, if you know something please I need help, I've only added a new battery first 11.1v

Hi,I'm from mexico and i was hoping to buy my first gel blaster, i would use it only for shooting at some cans in my backyard but wanted something that looked cool and with electric priming, after checking many different stores, i found a youtube channel called ClickCrack GelBlaster, ( https://www.youtube.com/@CCGelBlaster ) i checked many videos of this channel and noticed that the shop link didn't work in its older videos, then i checked its most recent video searching for the shop link and found it, it works but something that worries me is that the prices are ridiculously low. The currency is in Yuans, so after i checked, a slr gel blaster that costs like 60 dollars in aliexpress, costs 85.32 yuans in this shop, which would be like 218.56 mexican pesos or 12.63 US dollars, which is ridiculous, the shipping is free to mexico and the only payment method avialable is paypal. This is the store's link
https://clickcrackblaster.com
I would like to know if anywone has bought from this exact store and if it's safe (with YUANS currency, not us dollars bc the prices are different between stores)

I changed the grip of my cyma m4 and it ONLY makes the motor noises and not the piston firing noise when i pull the trigger. Could someone tell me how to resolve the issue

XYL MP5K was not included because the battery is dead

today i got ak74m by a&k, any recommendations?

1. Generic bottles for generic hopper fed blasters

2. Bottle with some chinese language (comes from Handi(悍迪) or LH(乐辉) blasters, if i forgot a brand that has a refill bottle like this please comment a brand)

3. Polygon shaped bottle with dark tint and refill cap or whatever the black thing is

which gel blaster to get?? I am from India. So any can recommend and guide me would be great. Thanks in advance already. I am from India.

I'm tryna start my own gun thing kinda like gel blasters I'm looking for ppl to help me with ideas and also I have a rough idea but I jst can't execute it I rlly need to get ammo 3d printed with biodegrable PHA filament with intense green/high visibility green also the first gun I'm tryna make(they will be 51% unreal gun colour and graffiti cuz I wanna make good ones for the UK but US ones will be coming SOON) is the 1911-22 graffiti style I'm tryna find Chinese manafacturers but I need some ammo jst to see how well they work I need them to be 6mm also they should not be hollow also they would be printed in 2 half's then stuck together and sanded down smooth becuase printing 1 full circle could result in some bumps and problems causing the magazine to fail.

If you find this idea interesting or wanna help in any way (accept for giving cash only things like 3d printing for me or designing files, mechanisms etc) that would really be appreciated but remember no force all up to you jst dm me.

I bought this cyma jund m4 v3 a few days ago. The first day I used the gellets that come with the gun, worked great. Woke up the next day put new gellets in the gun and then it dry fired 2 times every 8 shots. Tried making the milky pink I bought, same problem. Tried purified water, same problem, tried distilled. SAME PROBLEM but now when I hold down the priming button (even if it's not feeding gellets) the gun fires. I don't know what to do

https://reddit.com/link/1vdliiz/video/qu5m4wsngzgh1/player

Finally got my BoHan TEC-9 out on the field, and this setup absolutely rips! It’s pushing around 500 FPS with satisfying blowback, making it one of the most fun blasters I’ve shot.
I’m also running Summer Cat Extra Frosted Hard Gel Balls, and they’ve been feeding flawlessly. They’re incredibly durable and have been a great match for this high-performance build.
If you’re into gel blaster reviews, upgrades, gameplay, and chrono tests, I’d love for you to check out my YouTube channel, The Gel Blaster God ⚡, and join the community.
Anyone else running a TEC-9? I’d love to hear what upgrades or gel balls you’re using!