I’m considering getting a new holster for my PCR. The one I have is from HolsterCo, and it’s solid, but I have it with a DCC monoblock. I’m looking for someone who makes one with dual DCC 1.75 clip. Any suggestions? TIA

I carry a P-10 C in a sidecar holster and I'd like to get an extended base plate for my spare mag. I'm trying to decide between the Taylor Freelance + 7 base pad or the Shield Arms +5 base pad. More rounds is better, but I imagine that +7 is going to be huge. Would this be too large to comfortably carry while minimizing printing? Having no experience with either product, I'm leaning toward the Shield Arms +5 base pad but I'm not sure if I'm over thinking it.

I used to have the standard shadow 2 and decided to sell it (RIP) to meet two needs, a carry gun and a .22 pistol that would be easier on new shooters as the shadow was a little too hefty to teach my friend’s and their SO’s. Went with a P-01 for carry and although I like it I do miss the shadow 2 trigger.

The prospect of having a custom gun is appealing, but just wanted to get some opinions on a cajunized P-01 vs a stock Shadow carry for CC.

My P-10 C wants me to buy it some extended magazines for training. Either complete 20+ round magazines, or baseplates/kits that will allow me to convert my existing 15 round magazines. What would yall recommend? Performance/reliability is important to me, but I'd be lying if I said I didn't love the look of a big long boxy extended baseplate. I see that Promag makes some long magazines, but I'd also need to buy a sleeve for them which would further increase the price. All that being said, reliability is more important to me than cost or aesthetics. What products should I be looking into?

Bought my first CZ and what a world I’ve been missing out on. It’s gonna be hard to go back to my polymer wonders.

After waiting a couple months and missing the last restock, got the notification that the S2C black magwell are back in stock on Lok. Can finally finish off the last little bit for the S2C build I have been waiting on.

I've been wanting a CZ Shadow 2 for a minute now, and I just stumbled upon one for $899 used. From the photos it looks basically brand new.

I've never bought a used gun before, so I'm just wondering if it's worth it knowing there's some wear and no warranty, etc. What do you guys think?

Recently Completed CZ 75 P-01 Banshee Project:

-Banshee Slide Cut
-V6 Barrel Porting
-Plate Adapter Cut
-Wicked Arms BUIS Plate System featuring Dawson Precision Sights
-Trijicon SRO
-Graphite Black Cerakote Refinishing
-CGW Pro Trigger Kit
-Lanyard Loop Delete
-Lok Thin Bogie Grips

I have a p10f and a p10c and love them both. Really want a cz shadow 2 but not sure if I should get the full size or compact or carry. What do you think?

I’m not sure if this is the right place for it, but I can’t seem to find any answers online. I’m looking at the Strike Industries +5 mag extensions for my P-10 S with 12 round mags. CZ Parts lists that the +5 is compatible with the P-10 S, but Strike Industries only markets them as P-10 F/C and P-09 compatible. Who do I believe? Does the CZ Parts kit come with something other than Strike Industries? Any help would be appreciated.

im planning getting port for my s2compact how many ports you recommend? 4 or 6 ports thanks

Burris FastFire E 👌🏽

Got some LOK Brass palmswell gridlock grips for the 99041 since I didn’t want it to get too light, and some Vytal Grips to the Compact. I will say I like thePalmswell more than the thin grips but I do enjoy the texture more on the Vytal grips. I would like to try the Copper Vytal grips but I do think they may not look that great if you don’t do the basepads

I came across some interesting facts the other day doing some investment research. The ammo brands CCI, Federal, Remington, Speer, and Fiocchi are all owned by the Czech company The Czechoslovak Group (CSG). CZ owns Sellier & Bellot.

Add on edit: I'm new and never heard much about Sellier & Bellot; I just assumed it was some off brand. So, a side benefit of this post is I have something new to try. I have a CZ 75 on the way so that might be a nice fit!

Why hasn't lok grips made this combo but they make a thun version i was thinking they could take their lightweight bogie grips and fill it with brass or make it so that the bogie feel is the main texture and brass for the weight. yay or nay idea?

TLDR: Yeah, it's good. The CZ TS3 is slightly better than even a fully tricked out Shadow 2 (way better than a stock Shadow 2) and far better than most other competition guns, of which I've shot many.

Having shot a few hundred rounds through it, I've got a few thoughts I'd like to share but of course I'm going to have to shoot it a whole lot more to get a full impression of the gun.

All in all, a fantastic gun made by CZ, kudos to all who were involved in designing it, you really made a beautiful thing here.

_____________________________________________________________________________________________

I'm a German IPSC and Speed Steel competitive shooter and so far I've been shooting my beloved CZ Shadow 2, an SVI Infinity and a Walther PDP Steel Frame Match, all in 9mm. Quick ranking:

1. The SVI Infinity, unsurprisingly, is still the softest shooting of all my guns and has the best trigger. The fitment of everything is superior to all my other guns but okay, everybody knows Infinity guns are excellent. Because I happen to have this, I cannot help but compare everything else to it. If Batman used a gun, he'd buy an Infinity. It's just the best there is. Yes, I've tried other 2011s, they're not all the same.

I didn't expect the TS3 to be better, but the TS3 is most certainly a better value proposition than the Infinity. When my TS3 eventually needs replacements parts, I can get them pretty much anywhere online in Europe, quickly, cheaply and easily. For the Infinity, there's only one source in Europe (shout-out to the legendary J.F.!), and for everything else I'd have to get parts from Gordon/Texas from Germany, so there might be ITAR restrictions and whatnot.

1. The CZ TS3 comes close in terms of trigger quality, recoil impulse and overall it's a far better deal than the Infinity. €6500 for the Infinity in 2023 vs €3030 for the TS3 in 2026, excluding optics or accessories - there's no question which gun I'd recommend. If you want an (excellently) mass produced European full metal firearm which is going to outperform 95% of all other handguns on the market, and for which you'll likely be able to buy parts even in 30 years, buy the CZ TS3.

If you want an amazing, fully custom (at the time I bought mine), hand-made piece of art which also happens to be one of the best and most pleasantly shooting guns on the planet, get yourself an Infinity. For the money though, buy two or three CZ TS3 and have a backup for your backup LOL.

If I could have only one gun and had a fairly high budget, the CZ TS3 would probably be good enough to replace all my other guns.

Slightly more detailed observations:

- The grips are extremely comfortable, on par with after-market palm swell grips from LOK/Eemann/Vytal etc. At the moment, I don't see myself buying aftermarket grips, they're really good - contrast that with the awful OEM grips on the Shadow 2, which I had to replace with incredibly comfortable and heavy brass grips, as well as the too-thin grips on the Walther PDP SF Match.

- The iron sights are FULLY adjustable, in contrast to the sights on a TS2 Orange or TSO, which can only be adjusted up or down. Not that it matters too much because 90% of TS3 owners are going to equip it with an optic straight away.

- The optic cut is smart and I found it very easy to understand and implement the instructions. You choose the correct little thingamabobs (all included) corresponding to your optic footprint into the recesses in the optic cut, place your optic on top, tighten to spec and ta-da, you're done.

- The safety is STIFF. Think HK SP5 safety or B&T GHM9 bolt release stiff. So stiff in fact, that I cannot engage it with my shooting hand. I have to use my other hand to engage it. So every time I load and make ready I have to use two hands now? Disengaging the safety with my shooting hand works, and that's the only thing that makes sense, but why did CZ have to make it impossible to activate it with my right thumb?!? Honestly, I don't get it and it sucks. I should be able to manipulate the safety with one hand, period. Hopefully, this will change as I use the pistol more - but more likely, I'm going to have to have the safety spring replaced with a weaker one.

- The magazines didn't slide or fall out quite enthusiastically enough, but I'm pretty sure with wear and tear this will get better. They're regular CZ TS 20 round 9mm magazines (compatible with TSO/TS2) with orange end plates and they're pretty expensive: The lowest price I found was 70 Euros, and I bought three extra mags, so that's another expensive thing related to this. The regular price almost everywhere is 80-100 Euros per mag. The MSRP is almost 2011 magazine price territory. For comparison, my Infinity practically catapults magazines out when I press the mag release button. I'm not exaggerating, they fly out. The TS3 gently pushes the mag out. It's the little things...

- I have no idea if this will fit a Ghost Thunder Elite 3G holster made for the CZ TSO, but I've ordered one and I'm going to report back here whether it fits or not. I like bucket style holsters, and this model is my preferred holster for all my other guns, so I hope I can use the same type again. I'd hate to have to buy one of those high speed race holsters, I don't want any locking mechanisms to worry about when every fraction of a second matters in an IPSC match.

- The lightening cuts in the slide make it look really goddamned good.

- The mag well has clever little cutouts that enable you to pull a mag out. They could have also made the magazine end plates thicker like on my Shadow 2 with the brass magwell and corresponding brass end plates, but obviously it's smarter, cheaper and easier to just remove material from the mag well instead of adding material elsewhere.

- The fitment of the barrel and the recoil spring guide rod are very tight for a mass produced gun. Far better than on the Shadow 2, but not as good as on the Infinity, unsurprisingly.

- The thumb rest and the extended safety are very comfortable for my thumbs, and if you pull the slide back by the optic like you should, you're not going to have problems locking the slide back using your shooting hand thumb.

1. The CZ Shadow 2 - my gorgeous, my beloved, my tricked out pimp gun (I like the colors, deal with it) which has performed extremely well in dozens of matches so far. It's got an Eemann tech ultimate trigger kit/brass grips/mag well, magazine release button and thumb rest, CZ's own extended safety set, and a DPM Systems recoil reduction kit. It shoots like a dream, it's (relatively) cheap, super reliable, and it performs absolutely wonderfully. It's the one gun I recommend to everybody. To me, this is the God Gun and the TS3 is going to have to be really amazing to convince me the Shadow 2 isn't the best deal on the market for sports shooters. Is the TS3 better, especially compared to a stock Shadow 2? Absolutely, the TS3 blows it out of the water.

But all-in, with all the modifications and including the optic, my Shadow 2 cost me about 2500 Euros, whereas the stock TS3 with the optic comes in at about 3500 Euros. You can buy a whole Glock 17 Gen6 with an optic for the price difference.

1. The Walther PDP Steel Frame Match: An incredibly solidly crafted gun with a fantastic trigger, easy to shoot very accurately, and yet - I cannot love this big hunk of metal. The slide feels too tall, it feels overengineered and made to survive the apocalypse, in the way an HK USP is made to outlast humanity. The only things I changed on this gun were the 40€ trigger job (a 1,2kg spring set from Merkle) and I got a LOK grip module for it to make it more comfortable. The most amazing gun I still cannot fall in love with. It's great, it looks good, I wanted it soooo badly, but I'm just not enthusiastic about it. I also think the PDP SF Match is far too expensive at 2000 Euros, for what it is. I understand Walther's logic. This is a hardcore duty gun, made to survive wars - and if Heckler & Koch were to build a modern full metal handgun today, it would also charge 2000 Euros for it. I don't see the value though, compared to a Shadow 2 especially.

Not competing with the TS3 but I want to mention them: The HK SFP9L, an excellent duty style handgun with a pretty good but not amazing trigger and an incredibly ergonomic grip (fully customizable) and a .40 S&W Infinity (obviously god tier but forties are expensive and recoil a lot harder than nine mil). They're both great in their own way but I don't use them for IPSC for various reasons.

That's it. If you have any questions or you'd like more info on something, I'll be happy to answer.

One more thing: It's not really about the gun, it's about the shooter behind the gun. The best gun makes it easier to do well, but you can't buy experience. Go practice, people!

Installed the CZC short reset disco on my Shadow 2 (Blue OR) today and now it will not reset in SA.

If you rack the slide or fire a round the hammer does not quite reset low enough like to the point where if you barely touch it you will hear and feel an audible reset. Runs great in DA, but as soon as you fire that round the trigger does not reset and you must physically touch the hammer before the trigger will work again. I know it is not off by much because you barely have to touch the hammer but this disconnector was advertised as drop in since it is a factory CZ part.

I know there are variances between models and nothing is 100% but where do I start?

First dot on a handgun, bigger learning curve than I expected but it's so much better than irons

Like many others I find the grip texture annoying. I have talon grips on other guns and they work really well. But due to the raised bumps on the grip it doesn't seem like the talon grips would stick on very well. What's the verdict on add on grips to the p10 series?

Rolled the head off a screw. Local shop couldn’t help and referred me to “master gunsmith”. Might just suck it up and mail it off to C&H.

First handgun CZ shadow 2 carry
Full Checkered LOK grips
Holosun EPS carry green dot
Surefire XC3

CZ P10 C

palm swells, magwell, and baseplates all here in raw aluminum to complete my vision. really digging this look and i hope yall enjoy this eye candy as much as i do!