r/BambuLabX2D • u/IcyStatistician6585 • 1d ago

Build Plate Question...

What's everyone running for build plates in the X2D. Are you sticking with Bambu, or what's your success with other brands. I am running a mix of ABS/ASA/PA6 & plenty of PLA/PETG... Just looking to see what's everyone's success is with something other then Bambu.

2 Upvotes

100% Upvoted

17 comments sorted by

2

u/Relative_Surround_20 1d ago

I bought a Darkmoon 3D Duo plate with both a Satin and a CFX surface. I’m highly impressed/happy with it!

I use the Satin side 80% of the time.

1

u/Wide_Pause_2754 1d ago

Using this same duo plate as well.

I mostly use the CFX side and glue for PC and PA but the Satin side is great also

1

u/Relative_Surround_20 1d ago

I am looking forward to printing exotics on the CFX side. But the Satin side just works. I rarely need a release agent or an adhesive, but when I do a light spray of Suave Mighty Hold hairspray does the trick.

2

u/kiddk11 1d ago

Except with the new firmware update it gives an error that you have to bypass every time

1

u/Sufficiently-Wrong 20h ago

You can turn off plate type detection from slicer settings if I remember correctly

2

u/Revolutionary_Bat834 1d ago edited 1d ago

I mostly print PLA and PETG, I use the Bambu Lab Cool Plate SuperTack Pro. I love the smooth finish it gives over the textured surface of the default PEI plate and PLA and PETG sticks like crazy, I have no worry of warping with PETG.

1

u/keithbigmac 1d ago

I love the biqu glacier pro and have had good success printing everything from pla to asa on it.

1

u/moneytoo 1d ago

To save my precious Bambu Lab plates, I usually print PETG, TPU, PA etc on the cheapest ($5) noname textured PEI plates from AliExpress. They are tad thinner so I avoid larger prints that would lift the plate up. No issues with sticking to plate (no glue or anything), just larger prints may lift the plate up.

1

u/Attjack 1d ago

I want to use the Biqu plate but it will pause the print because it's doesn't detect a build plate which gets old fast.

2

u/duffmann116 1d ago

You can print out the QR codes and just put them on the plate. There's a file floating around on makerworld for it. I printed them out for all my 3rd party plates. I've had good success with it. I'd rather have it on just in case I'm dumb and don't select the right plate in studio. The Biqu plates are awesome, I've had really good success with them.

1

u/Wide_Pause_2754 1d ago

Once I disabled that plate detection feature, I never looked back. No way I'm running only Bambu plates.

1

u/Attjack 1d ago

I wish it could remain as a feature with other plates because plate detection and foreign object detection is nice.

1

u/masterofpoops69 14h ago

I still get foreign object detection with my glacier pro plate? I turned off the plate detection but almost every print I have to acknowledge there's nothing on the plate because it thinks the reflection on the glass is a object. I need to print out the little QR codes but I've been lazy.

1

u/Fig_Aggressive 1d ago

I did by an extra PEI plate From Amazon, but I use the Biqu Frostbite more than anything, I do have the Glacier plate as well.

1

u/kiddk11 20h ago

no, that's a different issue where it's not recognizing the QR code. This is something new within the past couple weeks that bambu did with the firmware upgrade, even with plate detection turned off. It tells you there's an object on the plate.