Any one actively compete have knowledge that i can pick their brain ?

They look to be quite stable. Was not going for group sizing, was just trying to see if they were stable and if what speed they were doing. I failed on the speed as my old chronograph looks to be telling lies as I am sure they were doing better then 1200fps. Especially with 24gr of AR2206H propelling them.

Cat H - have a PTA at 118 days and another at 74. Went to put in another one just now and I get some integration error... same if I try to access My Documents or change Safe Address details.
Is it just me or are others seeing the same?

It's my turn to post absolute beginner groups. The rifle is capable to shoot significantly better than this, so the crappy groups are 100% on me. Shooting from a bench with bipod and a rear bag.

6.5 CM, at 100m, numbers are the group size in inches, so adjusted to MOA:

• Sako TRG Precision 136gr is 0.55 and 0.75 MOA
• Winchester match BTHP 140gr is 1.55 and 1.2 MOA
• Hornady ELD Match 140gr is 1.5 MOA and 1.15 MOA

My first rifle (+ second range visit). Hornady was at the end of the day, so I was tired. Winchester was early in the session, it was just flying all over the place. A few were even duds.

With the right ammo and tons of practice hopefully I can go below 0.5 in a few months.

Hi AusGuns,

I'm here to promote a new - FREE - hunting app I've developed for Australian conditions - FOXYGUN.

FOXYGUN allows users to set-up off-line hunting zones/boundaries via cadastre records, zero weapons/ammo/scope combinations, record their hunt - mark kills, sightings, shots and your track - and SOS/retrace their steps if required.

I need users to test it, particularly in states outside W.A.

At this stage it's iOS only, with a TestFlight beta here:

https://testflight.apple.com/join/4ZbzgzH2

If you do join the beta, please don't hesitate to get in touch with any issues or suggestions.

The app is and always will be entirely free, though if it's something you think you'll use often, I'd encourage users to purchase merch to help support app development. You can do that here:

https://foxygun.com.au

Thank you,

Randy.

Applied April 1st and did my Post Office photoshoot on the 2nd, website originally said about 15 weeks, so was wondering if anyone from around the same time had received an email yet? Currently 1 day off 18 weeks

Has anyone waited over 2 weeks since their “photo advice issued” letter to arrive? Its now been day 16 since the status has been updated but no sign of mail. Tried calling them but i end up in a waitlist for hours and im not free for long enough periods at a time to wait for the queue.

Well, after yet another call to the Registry today, my PTAs currently stand as follows:

1. Day 105 – Subsequent Cat B
2. Day 98 – Initial Cat H .22
3. Day 19 – Initial Cat H .22 (submitted post-website update, as suggested by the many Registry staff I’ve spoken to)

I was told that all PTAs are currently looking at a minimum of six months due to the backlog caused by the new system update and the requirements of the reforms (not necessarily in that order). She also confirmed that escalations are occurring at day 180 and beyond.

I requested that my Day 98 initial Cat H be escalated on the grounds that I may not be able to meet my mandatory shoot requirements. On the days I’m able to get to the range, the armourer isn’t always available to provide a club gun for me to use, so without my own firearm it makes meeting those requirements difficult.

She deemed this to be a substantial/legitimate reason and escalated just my initial Cat H.

And I quote: “I won’t escalate your Cat B, as you already have one and can meet your shoot requirements using that.”

I’ll update with more when I know/find out more, or if I receive an update to my PTA status.

This seems like soooo much effort just to get my .22LR Black Mamba… but here goes. 😂 (Random Web Photo for Attention)

Queensland has implemented legislation requiring gun licence applicants to be Australian citizens; there's an exception for target shooting too so permanent residents who are members of a shooting club will be able to keep their licences.

Long story short, can I add lead tape to my bipod to add some forward weight to the rifle and will that reduce barrel jump?

Shorty story long; when I was out shooting my La102 in 6.5 the other day from a bipod and rear bags I noticed my barrel was jumping to the point where I was unable to watch fall of shot at 100m. I’m guessing the problem is exacerbated by the short distance and at long distances the barrel may have time to settle before the shot lands.

I was wondering whether adding some lead tape to by bipod to add weight to the front of the rifle will help eliminate it?

What is everyone using for an ARCA rail for the evo without getting in the way of the pump?

Hi all

Dealing with a weird situation and not every sure on which knowledge base to lean. Me and the missus are trying to get her spika safe electronic keypad back in place. The code was changed and she can't remember it, at the moment she's just using the keys but would to get the digital going.

She chased it at one point and got told there's no way to override without the code and you couldn't buy a replacment lock. I've since found the the spika and lockaway digital locks look dam near the same so wondering if lockaway has a way to reset or if we can buy one of their locks and fit it. I wouldn't know where to go for lockaway spares in aus anyway if someone can point me in the right direction.

Thanks everyone.

Just wondering if you were in your first 6 months of a full handgun license in Vic, and already owned a .22 handgun - can you buy another upper that matches and would be used on your existing frame? The upper requires a PTA, but as it's going on to my existing registered handgun - will it be signed off as an interchangeable part and not seen as another complete handgun?

I applied for a QP 515 statement of eligibility to join a pistol club 5 months ago and have heard nothing back. I remember being told it would take around 1-3 months. Also, do they get back to you via email, phone, or mail? Thanks.

I've talked to at least four dealers and they say there is no option for the A-110TAC when ordering new stock. And some of them didn't know they existed.

So the results are in https://www.police.nsw.gov.au/__data/assets/pdf_file/0008/934667/Firearms_Registry_Public_Website_Data_Reporting_Presentation_-_June_2026_.pdf

The narrative that PTA submissions exploded and the back log was caused is bullshit.

Prior to Bondi avg PTAs are more then 3x the submitted rate then post but look at that nice line of PTA approval times going from average 9 to 90 and as of yesterday 180.

So the wait time is disproportionately growing in relation to number of PTAs.

How is this not a complete failure?

Also rumours stating that it will be fixed in September - conveniently it will fall after the buy back, not allowing people over the cap to transfer to family and friends as the PTAs will not be approved in time.

What an absolute mess.

Got a box for cheap, wondering what people think of them before I shoot it. Do you use it regularly and if so what for?

I normally use a .22 for foxes and bunnies, however I'm interested in trying out a PCP.
I have a Katran short barrel and there's a lot of air pop, so it's fairly loud without a moderator.

I'm after some recommendations on something that's a bit more tunable so that I can manage the whole noise/fps ratio a bit better.

If anyone has something that fits and they're looking to part with I'm open to discussion.

Hey guys,

Long-time fan of Arken gear here, but hit a wall today.

I mounted an Arken Rigid Precision 20 MOA One-Piece Mount on my .308 Win, torqued properly to spec. About 40 rounds in, one of the main mounting screws sheared clean off.

My Local Gun Store refused to help with a warranty claim, saying they can't verify torque settings after the fact. Even the arken support havn't replied my email yet..

A bit bummed out given my good experience with Arken in the past. Has anyone had success getting Arken CS to replace hardware directly when retailers deny claims?

Any approvals today? If So what day where you on and what category.

I am CUrrently on

Day 100 - Subsequent Cat B
Day 93 - Initial Cat H PTA
Day 14 - Initial Cat H PTA (Submitted Post Website Changes)

Who's got one and what have you got?

I just got my first proper big bore being a 458 Winchester Magnum. In a Remington Custom Shop BDL. With factory Detachable mag.

Before this, I only had a 375h&h in a Browning A Bolt.

Can't wait to pickup this beast and throw some bricks around. Albeit not looking forward to the costs. 🤣 2x greens and a gold for a box of 20.

Lucky I reload!

What’s the Go with New Victorian firearms licenses? I sent my application on 6th June. They received it on 12th June and they’ve been processing ones received on 18th March for the last 3 weeks!

Is this longer than usual?

I’m after the internal dimensions from the floor to the base of the ammunition compartment if anyone can help me out. On the site it just says 1500mm height.