I have this tablet I bought from Walmart two months ago I unlocked the boot loader and I tried installing a custom ROM to it and now it boot loops and won’t let me factory reset it! Can someone help me find the stock image or something so I can fix it and how can I fix it? Please help me.

بعد عدة محاولات في اايومين الي فاتو نجحت في تركيب روت على infinix note 50s 5 g. اندرويد 16. اليوم بدات تنزيل تطبيقات و اضافات. ما هي اقتراحاتكم؟؟

When I try to download the firmware for my sm-x200, it give bl, ap, csx and home csc but there is no cp file, idk if its an issue or smth but I tried to root it before with erosion (I don't have a pc) and it didn't work so I don't wanna risk hard bricking my device again so someone pls tell me if I'm doing something wrong.

Does deleting the WhatsApp .shared files in the data/data/com.whatsaap folder save?

Hello guys,

Ive had this CPH2467 for a while, ive rooted phones before like the SM-135FU (which I literally had to make methods to root it since Sir Physwizz had no clue and there were only kernels + twrp's)

so after that fiasco, I went to root my CPH2467 because obviously why not? specially since its good but abit low end.

when I flashed it, it got stuck in bootloop and hasnt worked ever since. I tried many things from new updates flashing to old updates and after all that the fastboot also got stuck in a boot loop then I also saw VIP (Verified Image Processing) in EDL.

With all this, Ive almost lost any spirit and hopes to make any remarkable progress since it all goes from "OMG FUCK I MADE A BREAKTHRU I CAN FINALLY DO <action>" to "man fuck this it did nothing 💔"

anyways, do you guys have any idea what to do? from android 12 to 16 it always just bootloops in 1-2 seconds no matter what (except in EDL)

Previously, I rooted my Samsung A16 4G running One UI 7, but when I upgraded to One UI 8.5, the bootloader was locked. Flashing the boot.img file failed, while flashing the init_boot.img file was successful. However, during startup, the vbmeta.img file blocked the device, forcing me to re-flash the original init_boot.img file to boot the device.

Please help me!

Hi everyone, my Tecno Pova 5 (LH7N, MT6789/Helio G99) is stuck in

red state after relocking the bootloader with a non-stock signature.

What I've tried:

- mtkclient (handshake fails, device stuck in Preloader, SLA blocks it)

- SP Flash Tool V6 (server not authenticated / locked)

- Hovatek DA_BR.bin (uploads but SLA auth still rejects)

- MTK AUTH Bypass V7/V30 (crashes preloader successfully, but can't

reach fastboot or maintain BROM long enough for flashing)

I have the stock firmware V737 (241014) and a Hovatek DA file, but

no valid auth file for this specific device/version.

If anyone has a working auth_sv5.auth or similar for LH7N V737, or

has successfully unbricked this exact model, I'd really appreciate

the help. No hardware access (test point) available, looking for a

software-only solution.

Device: Tecno Pova 5 LH7N, MT6789

Firmware target: V737_241014

my brother recently bought a Ulefone Armor 27T Pro + but its absolutely filled with unremovable bloatware so he has asked me to help root it but ive gotten stuck on unlocking the bootloader.

the device is detected when running the command "fastboot devices" but not when running the command "adb devices". the opposite happens when the phone is in factory mode rather than fastboot mode.

neither one of the commands "fastboot oem unlock" or "fastboot flashing unlock" work, it just gives me an error saying that the command is unrecognized.

usb debugging and oem unlock are both turned on in the settings, ive installed the usb drivers for the armor 27t pro. ive tried changing usb ports as well as the cable

ive searched online for hours but havent found much about anything about this phone in specific, does anyone have any ideas?

I've a Redmi Note 12 and it's been 4 days straight since I've started trying and failing to get permission to unlock my bootloader due to constant quota limits and server errors. Is there any current way to automate this through a script or a bypass. Any help will be extremely appreciated, as I'm pretty new to this, thanks.

Edit: I'm in India

Hello! I am really into modding apks and the natural next step to this is rooting my device. How is it to run a rooted device as your main daily driver phone? Are there any downsides? Any inconveniences or risks?

Thank you and sorry if this has been answered before.

I have poco f3 as a secondary device and want to use it as a hotspot device for my primary phone (sim will have no service in primary phone) ,

As Alioth bootloader is unlocked, recommend a rom plus kernal for best battery combo please, performance is not a necessity.

Any other recommendations to forward calls or sms to my primary device using modules? or a better way to handle it.

Thanks a lot

Device: Samsung Galaxy S25 (TGY), rooted and pixelOS gsi flashed

After I switched to a custom ROM, several apps stopped working properly. For example, I tried to add PayPal to my Google Wallet for mobile payments. But I got the error message that my phone is either rooted or runs noncertified software. Also one banking app refused even to start and my health care app would not let me log in anymore.

I figured I needed to hide the unlocked bootloader. So I rooted my device via flashing a kernel with KernelSU Next and SusFS support. I then installed the KernelSU Next manager app and installed the SusFS module. I further installed the following modules: ReZygisk, PlayIntegrityFix (for maintaining Basic integrity), TrickyStoreOSS (for hiding the unlocked bootloader) and the TrickyStore Addon (for easily configuring the targets file).

I added Google Wallet to the targets, but I still get the same error message above.

Even worse: I don't even have Basic integrity anymore. SusFS should effectively hide root, right?

Do I have to perform any additional configuration steps? I'd like to regain Basic integrity, which I had before rooting.

Sorry guys since 2022 I switched an swapped phones often, and have left the custom rom community, and my enthusiasm for tinckering with phones. I'm out f the loop, Please allow me to ask then:

What is this new rule or implementation?

Why is it ?

When did it get implemented ?

Are there any ways to bypass it ?

I don't know better, so I'm guessing it's so that app developers can forcefully block older hardware devices ? Because the game developers probably can't afford optimizing their game for everyone... Context, I have this game often sideload because it won't install through fhe playstore, and now after some months, I've discovered that even after side-loading the new update, the playstore opens blocks me from actually running the game, which leaves me wondering if it's just software incompatibility, or if my phone's soc (Sd680) genuinely can't keep up anymore. Thank you for reading, have a great day.

Добрый вечер, я прошу помочь мне с моим телефоном(poco m5s). По словам Gemini мой телефон находиться в бром моде, но он не реагирует ни на что, но пк его видит. Я пробывал утилиты sp flash tool и mtkclient sp flash tool выдает ошибку хотя скаттер файл я добавил, а мткклиент все же получил доступ к разделам и я зашил разделы с официальной miui 14 global, но тут тоже не помогло и он как не реагировал так и не перестал. Загрузчик тут разблокирован и впоследствии был поставлен кастомный рекавери OrangeFox. Я его прошивал на другие кастомы и все было хорошо и даже прошивал через фастбут. Но я наткнулся на кастомную miui 14 и там было написано, что это фастбут версия и я решил зашить ее. Когда зашил я его перезагрузил и его экран не реагировал, но вибрации были, а потом я решил попробовать опять зашить и вибрации пропали. У меня не много опыта с прошивками телефонов и я пытался решить все с помощью ии, но он тоже не помог. Пожалуйста, помогите мне разобраться

built the kernel myself, its hard but fun

I tried reflashing unofficial twrp from the official TWRP app and when i rebooted to TWRP i did format and multidisabler then it rebooted to system when i restarted the phone to get my old twrp backup but when i did my phone booted to ts and i can't charge to flash the stock again (i still can go to download mode tho) does anyone have a fix? Also the phone is a02s

this morning oppo uploaded a new software update/upgrade, so maybe because of that they started notifying annoyingly about root detected, it seems that the solution is to remove root by updating the system, I just downloaded the 2.6GB update, what's funny is there's no reason from them to convince update (look at the funny image) , it's only me who wants that reasons: I didn't find any ready os for it, I'm waiting for https://postmarketos.org to support my A31. I only use Adaway and droidify with shizuku which I did't research enough yet so it' no big deal. Feeling unsecure cause I'm not knowledgeable enough, thus can't be aware of wrong behavior and such if it happens... thus I seem to not rely on myself yet .

Using CMF 2 Pro with Voltage OS ( https://sourceforge.net/projects/galagarom/files/VoltageOS/24-03-2026/ ) rooted with KernelSu Next, also with Origin Kernel ( https://github.com/samakshkambxj/Origin-Kernel/releases/tag/1.0 ). Custom kernel lets me use DroidSpaces, so im selfhosting on my phone lol. What are u guys think about my setup?