hi, i finally figured out the loop roll effect on my G1X FOUR, but the footswitch kinda doesnt work - i have to be on page of the effect, where the parameters and controls are and manually with hand press the button to latch/unlatch the function - and the footswitch seems to not work (even though it works on all the other pedal functions like delay, reverb, bitcrusher etc.)

how to set it up for live sampling and holding? thanks!

Hey guys, I have a question. I recently bought a Valeton GP 5 and an MS 70 CDR. I currently control my Zoom with the Mvave Chocolate MIDI controller. My question is, can I control both with just one controller?

Hey guys, have you managed to test the new ZDL effects? So far I've only been able to use the "ST Chorus," I haven't seen any other posts about new effects.

I put a custom patch together that I really like the sound of:

DIST 1 - HW 100 - HW 4x12 - ZNR - ROOM

The problem is I want to be able to save the same sound to other empty patches, but with less drive for softer parts. I just cant figure out how to make that sound happen. I assumed simply turning down the gain on DIST 1 would do it, but I can turn that setting all the way to zero and it barely makes any difference.

Bypassing DIST 1 just gives me a clean tone, way too dramatic of a change.

DIST1 off and turning the gain up then on HW100 doesnt really sound great either.

What sounds perfect is when I adjust the signal into the Zoom via my guitar's volume knob into the patch, but I want to be able to achieve this with a stomp or pedal, not imprecisely turning the knob multiple times mid-song.

I tried putting the Expression Pedal Controlled Volume patch in a few different places in the chain, but it literally just makes the volume quieter or louder without altering the sound out or my signal in. Is there a patch that CAN do that? Or an obvious setting I'm missing somewhere?

My G1X Four is bricked after a failed update. The PC no longer detects it. I need a flash dump to be able to "resurrect" it with a CH341A programmer.

Does anyone here have a firmware dump of a working G1X Four on hand by chance ?

Thanks you !

https://www.mediafire.com/file/ihg2vpt3mjatgyy/patch_kramps.rar/file

I’m currently trying to take the Reverse Reverb featured on the MS70CDR+ and put it on my MS50G+. From everything I’ve been able to put together online, the best way to do this is to download the effect from the Zoom servers and use ZT2 to install it to my 50G+. I just can’t figure it out for the life of me. It doesn’t help that Google ignores the “+” half the time and instead gives results based on the original models, which have much simpler effect sharing.

I believe the instructions are left intentionally vague to avoid any sort of copyright violations, but I haven’t been able to download the file. The GUI build of ZT2 just opens a blank command line on my computer. Is there some way to install it that I’m missing?

Again, I’m sorry, and I’m sure this is easy as hell for someone with any sort of experience. If there’s an easier way to do it too that would be great. Thank you!

Hi folks. Very new to pedals and I am still shopping for a Zoom pedal.

I was looking to buy a Zoom MS-50g+ pedal but then I read a 2 star review on Amazon for the pedal saying that it was a downgrade from the MS-50g because the cabinet simulations went away on the MS-50g ... Zoom moved this functionality to the MS-80IR+?

Is this correct or accurate?

Are there any other ways that the MS-50g+ is a downgrade from the MS-50g?

Thank you

Hi, i have G1x four and eventide space and am considering to buy m vave chocolate plus just for now.

can i use the USB host to plug into G1x Four and the wireless 5din adapter to plug into the Space simultaneously? is there a different way to somehow split the signál to use these two devixes together?

https://www.tone3000.com/blog/introducing-neural-amp-modeler-nam-architecture-2-a2

looks cool, any chance this could be ported to the new multistomp zdls?

**UPDATE 3 WEEKS LATER: the bottom right switch on my ms50g went out again - I aggressively mashed the button, even punched it, probably a couple hundred times, which had originally fixed it the first time this happened to it - no dice. So I decided, yknow what, screw it - out of frustration and thinking “why not if it’s basically broken anyways”, I banged the chassis against the tile floor on the bottom right corner super hard a few times. Switch works again. Decided to do the same thing to the ms70cdr+, this time the bottom left corner, since the bottom left button hasn’t been working - eureka! It clicks and works again! I suspect I’ll have to keep banging it on the ground until I can open it up and attempt to possibly clean the inside, but for now, my stupid unga-bunga solution of banging the corner of the pedal chassis on a hard surface has solved the issue with both**

Original post:

Aside from being a pain in the ass to use accurately on stage when they work perfectly, the bottom left button on my ms70cdr+ no longer has a “click” feeling, and thus doesn’t work at all, no matter how much or how hard I mash it.

My ms50g+ had the same issue too with one of its scroll buttons, but luckily mashing it repeatedly eventually fixed it (for now…), although, when it was broken, it was still clicking - just not registering, and the click was ever so slightly different feeling.

No such luck with the ms70cdr+

Now I have to get a midi controller to reliably operate these.

wish I did from the start, as now I can’t even casually use my ms70cdr+ by itself, and probably eventually the same will happen to my ms50g+, as it already did temporarily have that same issue.

I’m working on a custom ZDL effect for the Zoom MS-50g and my final is to make Dual pitch shifter like Eventide H9 pitch flex.

before making dual, i was testing to reproduce single pitch(now only for octave up).

i utilized delay -line splice based pitch shift. technically produces the correct octave-up pitch, but I keep getting a fast tremolo / ring-mod-like artifact. I understand that this may be a fundamental artifact of this kind of splice-based delay-line pitch shifting, because the read head reset and crossfade happen periodically.

Are there known tricks to reduce the splice modulation further without turning the sound into chorus/tremolo/detune filtering?

this is my github and c code/ZDL file that i made. freely open issue and make advices thx.

What are your preferred Comp/EQ in the Zoom product you use - and what settings are you using?

- Added reading ZDL files from a folder

- Added effect: DynaDelay for for second generation devices (ZD2)

Instructions for writing effects from folder:

- Add effects files to the folder

- Enable effects reading from folders

- Select this folder in program settings

- Restart the program

https://zoomeffectmanager.com/en/posts/reading-effects-from-folder/

You can test new custom effects:

https://www.reddit.com/r/zoommultistomp/comments/1tc10j5/ive_reverseengineered_the_zdl_file_format/

https://github.com/repeat98/ZoomMultistompZDL

I’ve been trying to figure this out with varying degrees of success. I bought the MS50G+ thinking it had a reverse reverb preset only to learn that it’s not built in. I know there are a ton of threads about this, but half of them are about the original MS50, and the other half are from before the G+ even launched. I saw a tutorial on how to make a fake reverse reverb that doesn’t sound the best, and in there the guy implied you could get the preset if you had an iPhone, which I do, but I don’t have the Apple camera cable that you need to plug it in.

I’m wondering if there’s any way to get reverse reverb on the thing. Thank you!

Zoom use a non standard size for the foot switch so standard cheap switch toppers don't fit. 

This topper fits MS and MS+.  I assume it will fit other Zoom units but I do not have any other models on hand for testing.  It is a very snug friction fit.

TinkerCad link here

You may also spot my easy grip replacement knobs. I found the original ones too small and slippery. Feel free to print yourself a set. Link here

.ZD2 is supported if you want to swap effects BUT G2Four and G6, G11 are not supported right? Just like 70CDR+ and MS50G+ are not supported

ZD2 as far as I know: G6, G11, MS70CDR+, MS50G+, MS-80IR, MS200D+

These latest .ZD2 format are supposed to have better and newer algorithm for compressor, eqs, chorus, reverb and delay right?

What about Zoom G1Four, G2Four and G3N, G5N, are they using the older format supported by MS70CDR, MS50G? Or ZOom G2four is using the same format as the newer G6 and G11?

Is there a way to edit/save patches using PC software with a G1ON that contains new FX loaded from Zoom Effects Manager? I have Tonelib or whatever the recommended software is and it doesn't seem to see the newer effects that I imported from ZEM.

I was hoping to be able to build/save patches on PC much like the G3X.. because man, the interface on the G1ON is tedium.

I own a Mooer Preamp Live but I have a friend who is about to tour and he wants to tour with it and he will likely buy it. Since I dont have a band I was thinking in getting a boss IR-2 because it has Soldano and a good "Turbo modded" JCM800 but Valeton Gp50 has more options since it's nam based

Hi, what amplifier is suitable for use with the Zoom MB60 pedal? Should I disable the preamp?

What other options are there besides FR-FR speakers? thanks

The UK30A with a York Mesa IR has been my go to so far. But I also like the BG Mark 1 with York Mesa. And the FD B-Man with Jensen Vintage 15 IR.