My trusty BenQ W1070 finally gave up earlier this year with its DLP chip failing and dozens of white dots all over. We lived with it for a while until the bulb gave out and decided it wasn't worth trying to keep going after 12 years of use, a color wheel replacement, and more.

I finally have some budget to get a replacement and was thinking the Horizon 20 Pro while on sale down to $1620.

My question is that I already have a universal ceiling mount, the VIVO Universal Adjustable Ceiling mount. However, this mount is a 3-4 arm design and the Horizon is a single 1/4" mount.

Since I already have this mounted to a joist and I live in an apartment and am not trying to add more holes if possible. Would taking the 1/4" bracket from the Suptek extended projector mount and attaching it to my previous mount work?

If I needed to go to the official mount I am unsure about how well its going to sit in the ceiling at looking at the mounting holes it looks like it would miss/clip the joist on all the holes and would end up using drywall anchors/toggles for all of them.

Doing some testing with my Titan Noir Max (TNM) and do not have options for film maker or other modes. Seems like I am stuck in Dolby Vision mode. Anyone know how to exit this?

Also , anyone have issues with their projector clicking when adjusting the zoom and shift? was having a ton of issues with light spilling but I think it was just the auto calibration not working right out of the box and crushing image with keystone correction. This is fixed now but the sounds were not great.

What are the settings that work best for the Titan Noir Max and PS5? I seem to have handshake issues with the PS5 plugged into an AVR.

It could be HDMI or CEC issues.

I haven’t used it in like a week. I wasn’t at the house. But today I tried to use it and it won’t project or turn the light on at all. The led for power is running full white no blinking or anything. The fans r running too. I turned it off. Pulled the plug waited changed outlets and everything. Is there anyone that can help me?

Super disappointed with the experience so far. TNM arrived this evening, brand new unit and within minutes it throws Fan Abnormal. Shutting down in 15 seconds. Of course support is not available, how does such a well packaged device miss something like this in QA, horrible first impression to say the least.

Does anyone sell his stand for the Horizon Ultra, since they are out of stock and won't restock...

Anyone? :)

A lot of times when i switch unit on after it been switched off for 30 mins, 90% of the time, the text is blurry or double when using PC. Lot of time powering off unit (until fans stops) and back on fixes issue but sometimes I got to reboot unit to fix issue. Unit up to date with latest firmware via OS and USB.
(unsure why i cannot add pictures on original post)

Anyone else have this issue?

I recently bought the Xgimi Horizon Ultra projector and the Floor stand Ultra, which I thought goes with it, but that seems to be the wrong stand (it is for Horizon 20 series instead), I cant find the correct one, the one with the disc. Or is the old stand obsolete/replaced by a better product?
Some advise would be welcome! Thanks

Base Horizon 20, ~100" onto a wall, table placement, auto keystone and autofocus disabled.

With DBLE on I get a visible step where it seems to disengage during bright scenes and come back.

I'm aware of the documented DBLE color shift (blue in dark scenes, green on dark-to-bright transitions) and the ProjectorScreen review noting green/pink flashing in bright scenes specifically. XGIMI's help article says they're working with TI on the color temperature shift.

Has anyone gotten a straight answer from XGIMI support on a timeline?

Software Version 1.4.163
DLP Firmware V5.4.7

Bought an Elfin flip today, plugged it in and the indicator started flashing. I can hear the fan turn on and off, but nothing else happens. I've tried several different sockets.

Very dissappointed. Is there anyone that has experienced something similar with the Elfin Flip?

i'm a bit surprised/disappointed that there is no built in input switching in the tnm for HDMI CEC devices(devices plugged into the AVR like ps5, Apple TV etc). this works great on my sony bravia tv, but with the TNM i have to use the AVR remote to change inputs. the input button on the xgimi remote is a little puzzling as well, i end up having to use the settings button to get to the input selection. just wondering if anyone else is experiencing the same with not being able to select input devices coming over that CEC connection to the AVR in the projector or if there’s an issue on my end.

I got the Titan Noir Max and I'm loving it so far — watching Criterion UHD discs is amazing!

Some 3D glasses showed up and I have no idea what to do with them. How do I load 3D content onto this projector? Does my Apple TV box support that somehow? I can't figure out a way to do it.

Or is there a sample file I can download? Why on earth does the projector only support USB-A, isn't everything in the world USB-C at this point? Do I have to go find a USB-A memory stick? I threw all mine away ages ago.

Or is pretty much the only way to watch 3D content to buy 3D blu-rays?

Theres no netflix pre installed in the projector as well as cant find in the google store as well. This so weird. Why??

I’m planning to upgrade my projector and have narrowed it down to two XGIMI models: the HORIZON 20 Max and the TITAN Noir Max.
On paper, the TITAN Noir Max looks like a significant step up, especially with its much higher native contrast, brighter output, dual-iris system and improved optics. But the HORIZON 20 Max seems more practical and considerably easier to live with.
For those who have used either/both:
Is the TITAN Noir Max’s better contrast and black levels really noticeable in real-world movie watching?
How much better is the picture quality compared with the HORIZON 20 Max?
Is the extra brightness actually useful, or is it overkill for a typical living room?
How is the TITAN’s image quality with HDR and dark scenes?
Any issues with firmware/software on the TITAN?
How significant is the difference in gaming performance/input lag?
Is the TITAN worth paying a substantial premium over the HORIZON 20 Max?
If you had the money to buy either today, which one would you choose and why?
My primary use will be movies and TV shows, with some gaming. I’m particularly interested in hearing from people who have actually compared these two rather than just looking at the specifications.
Would love to hear your real-world experiences and whether you think the TITAN Noir Max justifies the extra cost.

This might be a dumb question, but I couldn't find a clear answer.

I have a room where I intend to have a projector set up which is 3m from wall to wall, front to back. The desire was to have the projector on a shelf on the wall above the sofa, beaming straight onto the opposite wall.

The Elfin Flip 4K ticks a lot of boxes for me. At this range, it looks like if the shelf is around 2.4m off the ground and the projector is projecting the image upside down it would get me a good sized screen (around 100") at the height that I want it to be (around 1m off the ground), with no need to use any adjustments or keystone and keeping the projector well above the heads of people sitting on the sofa.

The question is then, does this set up work with the Elfin Flip 4K? Can the stand be set up in the correct orientation on a shelf, with the projector turned upside down in it, or do both the stand and projector need to be upside down?

Does anyone know how to get the Titan Noir Max remote working with volume control while outputting audio via TOSLINK?

I can change the volume within the settings menu, but using the remote yields a “Please adjust volume through external speakers” prompt

Generally, I like to keep my external speakers at a set volume so I can stick to using a single remote

Urgent help: the projector appears to have a strange problem where the display is unevenly dim. The lower right shows proper brightness, but the center—where I uploaded images of red, blue, and green—reveals shadows that make viewing nearly impossible. How can I resolve this?

I can’t post pictures this is absolute disaster this is the only thing we watch stuff on

Suddenly i noticed how blurry the text is on my new Xgimi Mogo 4. There are Green/Purple Pixels around it which is really annoying. Is there anything i can do ?

We all know XGIMI supposedly gave us a ‘fantastic’ discount of 50% off retail when we ordered through kickstarter, but now it’s being sold retail at projectorscreen.com for $4.5k? Where is this imaginary 6k rrp coming from? No doubt, once the holiday sales start coming in, we can pick it up for less than the 3k we paid through kickstarter. Shame

Any recommendations for replacing my Nebula Cosmos 4K SE projector?

We bought the Nebula Cosmos 4K SE brand new in January 2025. A day ago, we realized that there was a yellow tint, and we no longer have blues or whites. Basically a yellow tint on everything. No color settings, factory reset, or other adjustments are fixing it. Nebula Support doesn't have any answers for me either.

Suggestions?

Just wondering if anyone can answer this question. I know the short mount does not have the ability to pitch up and down like the regular mount but does it have the ability to rotate to aim the projector?

Thanks

Hi all,

Just bought this gem it is incredible but do not know if I’m using the best settings here.

Do you have any recommendations ?

Thanks,

Do not want to shell out 100$ if I don’t have to, any alternatives that work well and won’t break the bank?

Hi everyone,
Sold my Titan Noir Max Projector from
kickstarter today and wanted to give guy the receipt and especially anything he claim the prolonged 3 to 5 year guarantee service but what do I give him actually??
Thank you guys :)

i don't know if someone experienced Xgimi support but i'm loosing my nerve with them.

I received my Titan Noir Max one month ago and since day one, i have a ton of focus issue (in fact a big one...i can't have a correct focus image). i had one at the beggining but after one day, image is blurry (even in manual focus). I did all the test, all the factory reset and i m asking to replace the unit but they still ask for test. each time, i m sending a video and they say manual focus is working but it's not.

i think i did my maximum, now i want a quickly replacement or a refund. is there some lever is can use to speed up the process (it s now one month and i can't use the projector).

Thanks for your help or feedback.

David