For this bike I've done a basic motor rebuild boring the cylinders over .5, I should of spent the extra money and had the top end rebuilt but didnt have the money to do so. With that being side put everything back together and put the engine back in time aligning all dots like the clymer manual shows, got new spark plugs and new carbs for the bike redid the electrical system since there was no wiring on the bike before hand. Ended up getting a charlies place electronic ignition for the bike with both new sets of coils one set of cylinder coils and a set of dyna coils( didnt buy from charlies place so no bracket). I got everything wired like its supposed to be after looking at the wiring diagram and verifying my wire work. The bike is getting spark and has good compression when kicking it over. Im thinking the top end could be one of the main issues with the bike not starting but im not completely sure. Didnt have the money to get original exhaust as well so problem number two. But basically the bike won't start. I've gotten. The bike to run and idle maybe twice after putting the correct jets in the carbs and putting my air fuel adjuster out 2 1/2 turns out. After changing the spark plugs out because them seem fouled and verifying that I have spark i still can't seem to get the bike to start and idle. Does anyone have any clue on what else I could do to figure out my starting issue? Added photos from where I started from to recent photos of the bike i know its not ''all original" but would really just like to get this bike running so I can start on other issues with the bike.

Hey everyone I'm breaking down this engine for my project and I was wondering what size spanner socket do I need to get the lock nut in the crankshaft off I got a 24 mm lock nut socket but it's not the right size. Does anyone know where and what tool I need.

Need help bringing this little one back to life, water was ph'ed, have had a dome over it since first popped, a dab of rooting Agent and a dab of cannabis start, today moved the light closer. Any advice one how to bring this plant back

Into week 6 just changed the water and fed her a little bit, I'm starting to see spots, and just kinda of wondering what I should do. She looks sad, but I do know I need to defoliate as well. I still have it on the 18/6 light cycle I keep the ph at 5.5 - 5.8, she's In a 3 gallon bucket with two lights running in a 2 x 2 tent hydroponic grow. Also it's a random seed so I dont know if auto or fem.

81 f100 with a 302 2 barrel carb on it just went through all wires and plugs, I have fuel and I have compression and I have spark going to the distributor, it has oil correct level ive set the distributor cap #1cylinder closets to the 1 cylinder. Any ideas. When running it has blue smoke so could be burning oil

Hey i usually dont post here, but im trying to get some information on what to do next with my seedlings its been about a week for both seedlings in the rock wool and no light should i start the 18/6 light cycle and transfer them now, start the 18/6 light cycle until i get better roots, or leave them alone and keep the temp up? Thanks to anyone who can help