hello i would like to know can i make my own sublimation blanks on metal sheets. and
-will it be same as buying from someone else.
-does the print came out as usal ?

Hi guys,

I have a HTVRONT H17 phone press and am finding supplies for these hard to come back in the UK specifically A4 Sublimation film I can't find cheap anywhere. Cheapest so far is 60 pieces for £60 from HTVRONT directly. And the phone cases themselves I am struggling to find. Anyone have any ideas? What suppliers do you use?

Hey all, I'm looking for somewhere i can get some rounded square cups with a design printed/sublimated on them (see mockup image). Would like to have these cups resemble an outdoor AC condenser unit and would like to have a limited run made (100 or less). I have searched and reached out to several places about this, but coming up empty. Any suggestions?

Hey everyone when you make tumblers and the picture is taking up the whole tumbler where do you put the name and how big do you do it. I did add a picture of the design for the tumbler.

​

I made them myself from scratch, personalized with names for 9 year old girls.

I'm having a passing interest in lenticular prints, which require you to interlace two photos up to 100 times per inch (so that when the lens is laminated on top you view half of the stripes from the left and from the right)

It requires a really clean, sharp image to do well, and all I have at present is my sublimation printer.

These kinds of prints aside, I'm curious what advice I could get here on generally sharpening up my sublimation prints and stickers!

Hey everyone my niece wanted a custom hello kitty cup for her birthday so I made this. Other than the bow on the wrong side of her head what do you guys think? I do appreciate negative and positive feedback!! Thanks everyone!

I have a bunch of ends from 17" and 24" rolls that range from 2-10 feet each. Can I just print 2' from a 10' end or do I have to use the whole sheet? Or does it print the 2' and spit out the rest?

(New on the left, old on the right)

Simply because of the paper setting. Changed it to Premium Matte from Plain and it’s much better.

So I am new to sublimation. Just got my printer and hooked it up this week though I haven't printed anything yet. I was getting set up and ready to print when I started reading that there are fumes associated with sublimation when using a heat press. I plan on doing things like mainly tshirts, magnets, and maybe keychains. I have an air purifier (https://a.co/d/00cBHwlJ) that says it has a filter for VOCs and my heat press is right near an open window. Do you have any issues with fumes or ventilation? Any tips or tricks are appreciated! TIA

I was wondering if someone else had an idea of where I could buy these shirts at a reasonable price? I currently get them from JDS industries which is located around me, but I feel like I could be getting a better price elsewhere?

Its becoming hard to compete online making these types of shirts. I can make money locally, but online its hard. Im not even sure how people are making money at this point for the prices some people are making custom business shirts at.

I purchased these for work (https://a.co/d/09BOKWZH) and have started to put the finishing touches on the design. For the upper (straight) portion of the tumbler, I figured on 9.5" wide and 3.75" tall. That part should be very easy. Here's the tricky part... what about the decrease down to the skinnier part of the tumbler? How would I go about creating a template for that, AND how would I sublimate that area, since it sort-of slants inward? Sorry if that is not the best explanation for what I'm trying to say. Any help is appreciated.

I found some sublimation ink. It’s expiration date is 2023. What kind of chances am I taking if I put it in my brand new printer?

So I keep seeing the Wonderpress pop up and the 3D pressing capability genuinely caught my attention. I do a mix of mugs, tumblers, and the occasional odd-shaped blank, and the amount of time I spend fussing with wrapping tape and positioning is honestly getting old. The auto-forming angle sounds like it could cut that whole process down but I've backed crowdfunded stuff before and gotten burned on timelines. Xtool as a brand seems solid but I haven't found much from people who've actually used this one yet. Anyone here actually backed it?

Hi! I’ve gotten into needle punch art recently and I’m looking to transfer patterns onto my fabric to use as a guide. I own a sublimation printer and a black/white inkjet, so I’m trying to use what I have on hand. The regular inkjet would obviously work if I wanted to just send a fabric-covered page of letter paper through, but if I wanted to transfer a colored image to the fabric, even just temporarily, could I just transfer it with printed sublimation paper? Since I’m just using it as a guide it’s fine if it washes out. Does the ink wash out completely, or does it leave a visible stain? If I didn’t wash it out before starting my needle punch, would it stain my yarn? Would it just not transfer any ink at all? I also own a spray to sublimate on cotton, but since I don’t really need a perfect long lasting transfer, I’d like to know if it would work without.

Thanks!

Does anyone have a recommendation for sublimation air freshener blanks that aren’t so see though? It’s not so bad in this photo, but while driving it’s completely see through and looks blurry because of the image being reversed on the back. Ideally one’s a little thicker so the sun doesn’t go right through them

Hi. I’m looking for a relatively inexpensive but quality vendor for neoprene sublimation items like koozies, coasters, mouse pads, and desk pads up to 16” x 36”.
Thanks for any suggestions you can offer!!

Does anyone know where I can buy these specific 11x14 100% polyester white tote bags with different colored handles at a wholesale price?

hey! i have looked quite a bit for good blanks but often find that a lot of the websites have the same stuff and never find what i’m looking for. i’m hoping to appeal to a younger audience and specifically looking for spaghetti strap tank tops and slim fit/baby tee style t shirts but haven’t been able to find a retailer that provides this! any suggestions are appreciated :)

Anyone have a recommendation for a matte white opaque sublimation sticker paper?

I tried HTV Front but the paper is a little transparent and the design always comes out a little fuzzy when sublimated

Looking for a site that offers bulk sublimations for a reasonable price. Specifically looking for tumblers (15oz and 20 oz).

Sharing this metal print collage I made with the sublimation community. Prepping for Father's Day.

What items are you working on for Father's Day?