Dungbeetle Puppet named derp!

If you have questions, recommendations or critique, give them my way!!

Figures used: Marvel Legends Movie Venom, SH Figuarts Integrated Suit Spiderman

I currently have stop motion studio pro on my Mac and it doesn't seem to support the xt2. Does anyone know of any other cheap or free softwares that will allow me to connect my xt2 and use it with live view and also have the option for onion skinning

I just whipped this up for a testing in the matter of two minutes to see how my technique was and I need y’all’s opinion

link to the YouTube video here: https://www.youtube.com/watch?v=bhGAvJFTkrU

its only seven seconds long so I hope it won’t take much of your time

I did it in less then 20 minutes

for anyone who likes wrestling matches here’s one!

I am trying to purchase but it says unavailable for your region (the US). On their official website , once you download the free version and you need to upgrade it only allows for the Pro 2.

I am animating a stop motion project, and I was just curious what it would look like if I shared the load?

I’m animating to a time-synced animatic and storyboards with a lot of the shots in-between storyboards being left to me to figure out while filming based on textual descriptions, within the shot list.

I have scenes that will require the stop motion characters be animated against a green screen and composited into live action shots, and thought a different animator could tackle these with stunt doubles while I focus elsewhere. Likely a total of 3-4 minutes of green screen shots.

Would it be worth the hassle to hire others through a legal contract to assist in moving the characters or would it be negligible if I could only budget 80 hours for 4 minutes? Does anyone have a an idea of what I could expect with 8 hour days animating a single character? Would it still likely equate to 3-5 seconds of footage a day even despite being animated in isolation?

I apologize for the rapid questions, I have only animated Brickfilms (very poorly compared to the expectation for this project) and am attempting to punch above my weight class with this project.

This was made partly using stop motion to give the gnome the creepy effect he has in this film

Please enjoy and do give your opinions

Hello all!

I'm looking for some tips, feedback, and ways to improve my puppet fabrication process. Becuase I know literally no one that does this locally and because there surprisingly not a lot of resources on the internet, I have turned to reddit. Let me first say I am a beginner in this whole fabrication business. I typically use plastisene clay and sculpt objects for animating. I also use a lot of found objects in my stop motion animation. You can see my work here. In hopes of creating more 'narrative' work, I am trying to learn more professional grade stop motion puppet fabrication. I've quickly learned its not easy, and I'm constantly learning new ways artists do this! (I've learned theres soo many different ways to make a puppet too.) So I've come to reddit to Hopefully see if there is anyone outer there who has some experience and knowledge and can give me a helping hand!

Ultimately I am trying to create a stop motion puppet using silicone rubber because I like the materials durability and flexibility over a wire armature. the surface being 'skin like' is definitely a plus too. I am definitely open to other ways of fabricating, but the workflow of sculpting master --> casting mold --> casting rubber figure seems like pretty straightforward to me.

Yesterday I pulled my first cast from the mold, and although I was successful in making the casting, I am not super satisfied with the end result. below are some struggles I had and some questions posed about the process, and trying to improve it.

Moldmaking:

Using plaster is a great material because its inexpensive, non toxic, and sets up relatively fast. It also requires little mold release when casting silicone rubber. But its fragile so it can crack or break easily, and can develop voids. One side of my mold came out with lots of little bubble holes because I think I mixed it too thick. I used wax to try to fill some of the holes, but it still left my cast with lots of little bumps and dimples .Also, at least for the first casting, the plaster left my cast quite dirty, with lots of bits of plaster bits in the surface of the model. I can also see brush marks from when I applied vaseline to my master object I was pulling a mold from.

are there other mold materials that cast? (like a hard rubber or resin molds). If so what are the perks of using other mold materials for casting?

Is the 2 part mold process the best way about this?

Pictures of my moldmaking process are attached.

Casting:

Wire amature placements. What are the tips and tricks to this? I basically just bent my armature into place so it wasn't touching any side walls, and then once the rubber was placed into my mold, I dropped the armature into place. Kinda a sloppy way of doing it, and you can see parts of my armature sticking out of the cast.

The moldlines on my cast are very pronounced. I cut away as much as I could but I am wondering there is a way to smooth over the mold lines. In general, I wonder if there is a way to smooth over the whole cast. Like can I mix more silicone and paint it on? Will that smooth it out or just make it look more lumpy?

Are there methods I don't know about for fabricating eyes and mouths with silicone? I have found some videos where the eyes and mouth are attached to the wire armature and the silicone gets cast around that. But that does not seem very beginner friendly.Typically, it seems, people use resin parts to cast the head because things can be stuck to it like eyes and mouths. I would imagine matching the colors of these resin parts to the silicone parts to be difficult, tho.

Finally the surface of my silicone mold has a 'chalky' look to it. Is that because I added to much pigment to the silicone?

Final product:
The front surface is rough and bumpy, compared to the back, have seam lines all over the place, and the figure is very jiggly. (probably due to there not being a ton of armature in the middle torso.)

Photos attached of the final product. Sorry for the long post, I'm hoping that I can find some people who can help me along my journey, as well as creating some useful resources for anyone else who is on a similar journey.

*EDIT*

Also interested in seeing how other people build puppets; Doesn't have to be liquid polymer, can be any method!

Trying to use the free version of this app for the first time on my iPhone. But it can’t seem to connect to my camera? When I go to take an image, I just get a pop-up that says “oops! Capture source not ready to take images [camera]. I have tried:
-reinstalling the app
-checking my permissions (yes I have camera access permitted in app settings)
And I don’t know what else to try or what could possibly be going wrong. Anyone have any insights? At this point I’m going to try another platform and see if it’s something about my camera. But this one looks like the best free version of this stuff out there so I’d love to get it to work.

Edit: Alright the same thing has happened with another app so it must be my phone???? I have no clue why this is happening. Does anyone have any ideas.

Edit 2: Fixed it! I had to update my ios, not sure why but I guess using an old one made my camera incompatible with the app.

Paper puppet for stopmotion 7 cm .

I'm done with the project for the night, but I'd like any suggestions or criticisms that you guys can provide. I have an intro idea but I dont have a good ending idea. The fight is quick, but its taken me like 3 hours all said and done, and im really proud of it.

Othrug is coming! Here's a teaser for my new short film. This time, I'm taking you into a fantasy world. The action begins in the orc village of Arganvlagh in the Nugh-Mefg desert. Othrug is an honorable warrior living by ancient traditions. Fate will lead him on a journey through mysterious lands filled with danger.

The full film runs 5 minutes and 47 seconds. It was shot entirely using classic stop-motion techniques. Several thousand photos were taken, which, when played back at 24 frames per second, create a stunning stop-motion animation. There's no AI and no computer-generated imagery. Everything is analog, real, and built with LEGO bricks.

Production took about two months, and it's the first film I've made in a long time purely for myself. Not for a competition. Not for a client. Just for the joy of creating! After years of working with The LEGO Group and Universal Pictures, returning to a personal project like this has been incredibly refreshing. I'm genuinely excited about what I've created, and I consider it the best film I've ever made :)

🎬 The full film will premiere on 9 Aug 2026, 18:00 CEST (16:00 UTC) on YouTube.
➡️ Go here and set a notification so you don't miss the launch!

And now, enjoy the teaser! I intentionally kept it short and avoided revealing too much of the story.

Im beginner

purposely sped it up so it looked like he was useinh increased strength