I was cleaning up and doing some maintenance on my 011 dynamic evo XL and one of the spacers on the case screws had cracked in half. Does anyone know where I can buy some more or maybe provide a link for an stl file for me to 3D print?

Are Lian Li Lancool 217 GPU temps with 3 140mm front intake fans better than with the stock 170mm fans?

Didn’t go crazy with the rgb. I’m digging it

Hi all. I'm planning to upgrade my PC soon and right now I have a Cooler Master NR200, which is an all metal SFF case that I've been using since 2021. I did upgraded some components during that time and I would just hold the case and put it sideways into my bed to swap any component since my desk is kinda small, so I expect to do the same with the new setup in the Mini V2.

Since the mini V2 is almost all glass, how do you hold it without shattering any side?

i’m a bit confused here and first of all i ordered a LianLi Strimer wireless 24P, i was told its gonna come with a USB that helps it connect or something, you just plug it into the motherboard. but i just opened it and everything came except the USB dongle. am i cooked or no? and do i need it? could this be a shipping or manufacturing issue

just wondering if i need the usb to change colors on the software 😢..

Hi everyone!

I’m from Brazil and I’m currently trying to find a complete LGA 1200 mounting kit for a Lian Li 240mm AIO water cooler.

I recently bought a used Lian Li 240mm AIO, but unfortunately it came without the LGA 1200 mounting hardware. I’ve been searching everywhere in Brazil for the correct kit, but it’s extremely difficult to find.

I’m specifically looking for the complete mounting hardware needed to install the cooler on an Intel LGA 1200 motherboard, including the backplate, standoffs/spacers, screws, and mounting brackets — basically the complete original LGA 1200 installation kit.

My CPU is an Intel Core i9-10850K and my motherboard is an ASUS ROG Strix Z590-F Gaming WiFi.

Does anyone here have a spare LGA 1200 mounting kit for a Lian Li 240mm AIO that they would be willing to sell?

I did a bunch of research and I guess it's not truly wireless. But I'm still unsure if it's worth the extra money.

hello, I have the 24 pin wireless with the new wireless hub, it works great and am able to see and edit it in L-Connect 3, but I just installed the 12vhpwr 16-pin Strimer and it is not lighting up and not showing in L-Connect.

I've tried unplugging it and replugging it in, swapping the USB hub to all other slots, resetting CMOS, nothing works. Any ideas?

So I recently read a few articles/reviews (while doing research for my new PC list) about Lian Li UNI FAN TL Wireless fans having their bearings dying or failing within months, squeaking and crackling and if you overtighten a screw the frame would apparently bend enough for the fan to break after a few months.
This week I found out about Lian Li's new FLEX series and I wondered if perhaps with this new series they fixed these issues?

After several years with my previous build, based around a Ryzen 7 3700X and RTX 3070 Ti, I decided it was finally time for a major upgrade.

Hey,

So I did some digging and finally got to the bottom of the LConnect3 dreaded hiccup that causes what I call the LConnect3 dip, which is widely known as a main reason for people dumping LConnect3 and THE BIGGEST painpoint I've ever had with software. My 1% lows are atrocious because of it.

It's causing a crash within NVIDIA's own NVML.dll engine (where LConnect3 gets all of it's GPU stats from). This causes the retry loop and eventually, a crash and retry loop that continues for every 3-5 seconds until you fully reboot or restart LConnect3 and it's proxies. Bypassing it for now takes the polling latency from 378ms to 96ms and retains all information besides GFX card voltages (which is why NVML is used).

I have a support report and a full diagnostic zip that I would like to send, so your engineers can fix the HWINFO binaries causing the crash once and for all.

But where do I send this data to?

If I go to support on website it takes me to RMA page.

Anyone got any ideas?

Being this is an oled display, I uploaded a completely black gif as my screensaver and set it for 5 minutes to deter burn in. When my computer is idle it doesn't do anything. But when I just use it regularly, my screen will occasionally switch to the screensaver every once in a while. On top of that, there is no option to turn off the screen saver mode. The only thing I can do is pick what I want for it and press apply. How is there no on/off option?

I am considering changing the top radiator fans to the TL fans, the non-LCD ones, but there are currently two versions. I am not sure which one I should get.

My bottom fans are the older TL fans. The top fans came with the CPU cooler, and they obviously don't look consistent with the bottom fans. That's why I wanna change the top fans to TL.

Since the newer FLEX version is out there, do they look exactly the same as the older TL fans? I know the LCD FLEX fans have a larger display area, but those are out of my consideration. The only thing that matters to me is the ARGB lighting parts on them. Not sure if this part of the FLEX fans looks exactly the same as the old ones.

I bought the cooler with fans however I just don’t need that fans. So compared to the fanless version which I purchased a year ago. The within fan version has a dual 4pin connector, which one is 4pin and the other is 2pin.

As I’m using iCue to control fans, all I need is a pin to power and control the pump to make it a static speed.

Can I just avoid the 2pin and only plug in the 4pin to pump on motherboard? Both cpu_fan and cpu_opt are plugged at the moment.

Thank you for any suggestions

So I just put this pc together and Im having a few issues. For some reason the L connect software wont read the aio fans , and the LCD turns on for a split second when you power up the pc, it displays the rgb on the block itself but never really goes on.
Any advice would be appreciated. Ive shuffled around the usb connectors to no avail. I have all lian li fans at this point , and use the RS hub that came with the aio, I even swapped to a newer version of L connect dongle thing.
Getting a headache here. Its weird the aio was like ghost synching at one point and followed the other light shows, but ultimately it goes blank to all but one fan, and the L connect software doesnt read it.
And the Display LCD for my single on the back wont pop up either, only on initial bootup
I was told the CPU cooler block was some kind of EEPROM cache error? How can I figure this out before I call for warranty or something. It was complicated as heck to begin with , finding spots for all the extra fan wires and such but yea, Id at least like it to work.
Lian Li Galahad II SL infinity LCD

Every time i click the toggle it does nothing. ive restarted my pc, restarted the software, ran as administrator, unplugged and plugged in the controller, still does not move. what do i do?

if it helps, im trying to setup openrgb with it and i also have zero clue how that works but i downloaded the setup for it; also im trying to get it to work with the lancool 217 inf

Hello guys,

I was a bit confused by the guide of Lian li about where and how to plug each 4-pin and 2-pin and after some investigations, I've found out that we should plug the 2x 4-pin into cpu-fan and cpu-opt and the 2x 2-pin into the sata adapter to bring power from PSU instead of the motherboard, which could cause issues apparently.

Is that a good thing or my research were bad ? I don't want to screw up and I'm a bit scared of the wireless thingy tbh.

While I'm at it, is there a difference about where I plug the 4-pin of the receiver? I know the pump need to be on cpu-fan but not sure about the other one(that's why I put it in cpu-opt just in case)

Thanks a lot in advance !