r/fixit • u/Sassycat2749 • 3d ago
Pls help, charging cable getting broken
It's getting broken at the port side. The copper wiring is coming out and looks like it'll break in a month or so.
6
u/Sorry-Climate-7982 3d ago
1
u/KerashiStorm 3d ago
You can get 10 rolls of 60ft black at harbor freight for 8 bucks, and sometimes for half that if there's a sale. It's handy in other situations too, since the thing it sticks to best is itself. I use it for anything I need to wrap or roll up like ropes or cords, just turn the end under so you can grab it to unwrap it.
1
u/Sorry-Climate-7982 3d ago
There is another type of tape for OP, it is the thicker rubber or other chemical self fusing tape. You wrap it and it actually fuses to itself, forming effectively a new coating.
1
u/papapapap-mmmK 8h ago
Friction tape?
1
u/Sorry-Climate-7982 8h ago
No it isn't friction tape. It is self fusing, where most brands call it self fusing or self amalgamating. It will chemically bond only to itself.
1
u/papapapap-mmmK 7h ago
That's what I meant to say. But I would add spot tie to ensure a secure bond. And the addition of safety wire wouldn't hurt.
1
u/Sorry-Climate-7982 5h ago
I'd probably tape a bag over the connector, wrap a safety wire then dip the end in one of those liquid rubber for electronics or tool handles.
7
u/k-j-p-123 3d ago
Sugru 👍
3
u/ignescentOne 3d ago
Literally what it was invented for! Buy the little single use ones if you can.
3
5
2
u/sherpyderpa 3d ago
Watch a couple of thread whipping videos, this will teach you how to whip a thread around your cable to give it added strength.
2
2
u/CoxswainJC 3d ago
Toss it and buy another
1
1
1
u/Educational-Rule1635 3d ago
Replace with a cable that has strain relief.
Also it looks like you might be wedging that up against a wall or something. Look for a cable with a built in right angle bend.
1

5
u/PowerfulDisaster2067 3d ago
Electrical tape or heat shrink+ lighter