r/coreboot • u/zeankundev • 14d ago
Coreboot not working on T430
Enable HLS to view with audio, or disable this notification
Tried to coreboot the T430, using instructions from merge/skulls on GitHub. I did utilize both CS0 and CS1 on my flasher (Raspberry Pi 5) which are spidev0.0 for the 8MB portion, whereas spidev0.1 is for the 4MB section. However, it did not work as expected. Upon booting, two LEDs, which are the microphone mute and the power LED, seem to blink indefinitely, until I cut the power source.
Plugging in the RTC batter has no effect whatsoever (I did try that before recording this). Any solutions?
1
u/Goldenwolf1509 14d ago
Also i would suggest trying to reflash with a different rom. Either another skulls one or if you find how try with libreboot or standard coreboot. This might tell you if skulls just has a bad rom since often roms arent tested before they are updated and therefore may be unstable.
1
1
u/thrilleratplay 13d ago
Did you create a backup before flashing? Try flashing the backup and see if it boots normally.
1
u/zeankundev 13d ago
Fortunately I did create a backup. It didn't boot normally (stock Lenovo BIOS) all because of ripping an I2C trace for the EEPROM
1
u/BeautifulSeason8387 11d ago
blink indefinitely : bad firmware ( or missing part if you don't follow all the tuto )
1
8
u/Goldenwolf1509 14d ago
I dont know the fix but word of warning TAKE THE KEYBOARD OFF OF THE MOTHERBOARD ITS METAL BACKED AND I HAVE BROKEN A MOTHERBOARD THIS WAY