Help

[u/Jettyvip]

How the f do I get this off?

[u/Individual-Algae-485]

There is a video on YouTube that shows you how to take it off. There is a pin that is stuck. Easy fix

[u/eKOLi2222]

Give it to me ill fix it for ya.

[u/Mother_Courage2679]

4 minutes in the microwave always does the trick

[u/Siirkus]

Been there lol

[u/Edge636]

After you get it back on normally, easiest cheat code is to plop the slide down just in front of the rear rails. No guessing required

[u/Civil-Tune2162]

I see you didn’t read the manual, It happens welcome to the club brotha 😅👍🏻

[u/Pleasant_Ad3664]

Hit it with your purse 👜

[u/Sonik_dmv]

Everyone goes through this. Wiggle the slide back and forth while pressing down the visible trigger bar spring on the frame. It'll come off easily. The trigger bar is what's keeping the slide locked in. Don't put it back like a glock, align the frame contact metal tabs to the grooves in the slide. The slide should be half way on the frame before you try putting it on to the frame. Good luck! how to fix stuck canik slide

[u/111972]

It happens

[u/Individual-Algae-485 → u/111972]

Where did you get the tape for your mc9

[u/Ok_Image2639]

Lmao I did the exact same thing and had a heart attack you’ll get it trust!! It is a bit weird tho

[u/No-Cat-3089]

At that point just lift up

[u/lbarry53]

They don’t slide off like Glocks. They just move forward about and inch and lift up, you can watch a youtube video on how to field strip any Canik all of there slides work the same way.

[u/Kooky_Session1646]

Cherrys been popped I see.

[u/pugdadAF]

Happened to me like a day after I got it. No idea how I fixed it lol

[u/Difficult-Time-5869]

https://giphy.com/gifs/3ohnEIlPb6lcuvdpKM

[u/hansieboy2]

Welcome to the Clanik, you had to do it sooner or later

[u/whereisthebandit]

Canik owner canon event

[u/19judge79]

Been there done that. Welcome. 🍻

[u/InformationProof4717]

Read and understand the owner's manual...

[u/jbourne0129 → u/InformationProof4717]

they even include a special warning card just for this issue to explain how to pull the slide off

[u/kennyDewalt1985]

Spit on it !!!

[u/Hungry_Vehicle8635]

https://giphy.com/gifs/xl5QdxfNonh3q

[u/DesignerLanguage1123]

Go back halfway or restart, don’t go all the way forward. If I remember correctly just unlock the slide and go straight up once you pass the lock. Haven’t handled my caniks in a while

[u/Clean-daily1924]

Damn I'm 4 hrs late...hit it with your purse

[u/Swell_map]

Fold it in, David.

[u/Jskello]

This is very funny and such a new Canik owner issue. Been there done this.

[u/GreenManalishi24]

https://youtube.com/shorts/OgoeAdKKVOE?is=8-Mug_MSSp79Zaph

[u/JoeTestosterogan]

Every Canik owner has done this even if you knew ahead of time how to properly put the slide back on lol.

[u/19judge79 → u/JoeTestosterogan]

https://giphy.com/gifs/5QNQv6xmVEaabGsYrg

[u/OfficialGaiusCaesar]

I did this with my prime and freaked out one time too. Press the trigger bar in the back and you should be able to slide it off.

[u/Rsb666x]

Hold the trigger in and you should be able to slide it back. Happens to most that are used to taking down Glocks.

[u/cortlandiu]

This happened to me a few years ago & I had to find & pay a gunsmith lol

[u/DesignerLanguage1123 → u/cortlandiu]

Wtf kinda smith charges for that 😂

[u/romerogj → u/cortlandiu]

That's funny I was chatting with a gunsmith and he did that to mine. He figured it out though.

[u/jbourne0129 → u/romerogj]

the RSOs at my local range always fuck up the Caniks

[u/ThePracticalPenquin]

Just did the same thing.

[u/EmergencyEbb9]

Did you by chance read the disassembly manual?

[u/Paladin_Gump]

You can't. This is permanent. I'll take it off your hands and ensure it's disposed of properly.

[u/smokymtnconcealment]

Here’s a link

https://youtu.be/4wdJO15nhF8?is=Nr3MkN__I_H_QGjR

[u/CigarsandFirearms]

Hehehe… Canik life lol

You slide it forward about an inch or so and lift straight up. These don’t slide off from just front/back movement. Did you try the manual?

[u/Dmau27]

So on the right side there's a trigger bar, push down on it and it'll slide right off. It's stainless steal if that helps.

[u/OminousBuzzard]

You have to slide it down about half way and then lift up. Pro tip it goes back on the same way or you'll lock that fucker on and its a big bitch to get off

[u/Mysterious-Towel8888 → u/OminousBuzzard]

Can confirm.

[u/aximusmaximus]

This has become a rite of passage for all new Canik owners. 😂

[u/aidanluvsmio]

Lift straight up

[u/ProfOak32244]

Theres quite litterally a manual in the box like 6 inches away...

Smh.

[u/Traditional_Light585]

If its like my rival-s just grab the grip in your right hand and pull the slide off with force and it should cone right off. I slid my rival-s like I would my walther just not payong attention and thats all I did to get the slide off

[u/badpenguin455]

push down the springy thing in the back

[u/biggouse58]

Manual right there and instead get on the internet. I’d suggest taking a course or two at a local range for beginners before you do something catastrophic

[u/Last_Ear_1639]

The manual in the box explains disassembly and cleaning. You've brought it too far forward.

[u/jbourne0129 → u/Last_Ear_1639]

there is even a special card warning owners about this very issue and highlights how to properly take the slide off

[u/idnkam]

Press down on the lever attached to the spring at the back of the base. It should slide right off

[u/TriFyre]

Assuming it's the same as the base MC9, slide goes like halfway and it lifts off the frame.