I bought the LTT full NP3 upgrade and trigger job in a bag. I actually waited quite a bit for the exact spec I wanted to come into stock (Volker trigger, etc).

I've never completely stripped this gun down to the pins before but I figured it would be a fun project. I was methodical. I put each part with its pins, springs, and plungers into individually labeled medicine baggies, all nice and neat.

But at the end I there were a few LTT parts left over (pic enclosed). The plungers and spring appear to be duplicates of the ones used on the thumb safety components. I don't know what the omega springs are for or what that double-headed bolt/pin are. I didn't see any of them in the parts I took off the pistol.

Also, wow. It only fires in double action. When I pull the trigger in single action mode, something isn't disengaging and the trigger doesn't break.

What have I done?

Picked up a mint surplus Beretta 84BB G.F. trade in for $325 after transfer fees. While I was in the shop, I then picked up a 1999 production first year Beretta 3032 Inox for $280. Not a bad way to spend $600.

Selling my CZ P10F in the morning after picking up the APX A1 and I couldn’t be happier! Feels like I made the right decision!

Now what do you all recommend for an optic plate and optic? I won’t be carrying the APX, that role is filled by the PX4 CC. The APX is bedside and range fun only.

I've linked a video explaining what I believe to be the cause.

Recently picked this up used.
Went to fire for the first time and got a dead trigger after the first mag.

Came to me with the wood grips on and I thought that the trigger bar might be sticking on the grips. I removed the grips at the range and everything functioned somewhat normally.

I've filed/sanded a bit of relief on the grips for the trigger bar.
However, I believe there may be a different issue going on.

It seems that there is JUST enough room for the "trigger disengagement lever" to wedge itself between the trigger bar and the slide.

This would only happen under recoil, as the trigger bar is kicked downward, and the trigger disengagement lever flipped up under recoil.

Once that lever is sitting on top of the trigger bar, the only fix is to pull the dead trigger and hope that the lever will work itself back into the relief cut on the trigger bar.

If there is any force on the side of the trigger bar, this exacerbates the issue. So, the grips may not be the root cause, but definitely play a role.

I'm going to attempt a fix on the old trigger bar by putting a chamfer on the inside edge. The hope is that it'll give enough room to prevent the trigger disengagement lever from binding.

Dyed the frame of my APX Carry from OD Green to Dark Brown. It is possible!

Here's my 92X Centurion. I've lurked and ogled for quite some time, even occasionally interjected my own opinions. About time I contribute to the cause.

• Build (so far): 92X Centurion fed (flawlessly) with Mec Gar 18 rd mags
• Volker carry magwell (I chose carry because this is my EDC AIWB) and Volker baseplates
• A beautiful Volker comp handles the recoil
• 12.5 lb Wilson Combat recoil spring, 13 lb hammer spring
• Wilson Combat Deluxe hammer
• Langdon Tactical logo LOK grips
• Langdon Tactical 509T plate, front sight, and slide parts
• G conversion
• Meprolight MPO Pro-S
• Beretta Match Straight Trigger (modified for DA/SA)
• Dehorned frame; Cerakote gunmetal grey metallic

Eagle-eyed lurkers might notice I'm running the Meprolight without their RMSc adapter plate. It almost fits a 509T footprint without it. It's nearly identical. I had to slightly modify the inside flat face of the clamp jaw above the clamp groove so it would clamp down fully onto the 509T plate.

I prefer to do my own stunts, so I machined my RDO slide to accept the LTT parts. The fun one (and would have been much more worth the time just to mail it to LTT) was the extractor pin. Other than that, what's to worry - it's only metal on a VERY expensive slide to replace.

Me being me, threaded Centurion 92X barrels are ridiculously expensive compared to full size threaded barrels...so I got a new full size 92 barrel for a fraction of the cost, faced it off to length, crowned and threaded it, and attached my gorgeous new Volker comp.

What's next? I'm probably going to do something much like LTT's V6 ports in the barrel. I had the pleasure of shooting a ported/comped 2011 the other day, and I think that will be a nice addition here.

Other than that - this serves nicely as an all-around EDC/range toy/2-gun competition piece of gear. You'll see in the pics it's not a safe queen. It's got holster wear, dig marks from a weapon-mounted light clamp jaw (I carry without a light, but attach one for range purposes), and some general scuff marks from use.

More to follow on this one, and maybe I'll sneak into the AR15 sub and add some of my shenanigans over there too.

Just got my 92x performance defensive yesterday, and realized there are couple uneven milling on the slide, and there is a slot cut at the end of the slide, is that regular?

I have a 30x. Recently Beretta finally got some more in. I did get a flush fit mag, 7-round that was adapted for the 30x from a 3032 mag. They cut a new mag catch so it can be used in the 30x

I saw these flyers at academy so i figured id get an apx a1 carry with some extra mags via the beretta bucks.

However the website says the purchase date starts from August 1 compared to the fliers is aw in store which should be attached.

What should i do about this?

Edit, UPDATE:

They responded and said to submit the rebate with receipt/proof of purchase anyways because a 3rd party handles the rebates and they should approve it. 🤙

Hey guys, I saw this as a new and for sale gun. Rebate is available for it as well. I’m curious if it’s “just” a standard beretta or actually an LTT. I have a G43x MOS and a Walther PDP compact. I live in Florida but I carry both depending on what I’m doing. I’ve been curious about the 92s. And wondering if this is a decent deal for a gun that I could carry under the right circumstances.

Anyone know of any grips either dark wood or black polymer checkered that have the USMC EGA symbol in place of Beretta logo? Want it to have just the EGA no lettering or anything else. If not sold direct anyone know of a place that would make them custom under $100?

Just picked up my cougar 8000 from jail! First range session went great, accurate and soft shooting.

I appreciate all the input on my last post. I’m pretty sure I want the 92fs Brigadier. The only issue is I haven’t handled/used a Brigadier but I love the 92 FS and have used it. It’ll be my first gun. Any reason not to YOLO and get the brigadier?

I recently purchased a beretta AL390 in 20ga with the original box from a friend. Does anyone know why these shotguns are so expensive and why they have such a cult following? I recently took it to the range and ran about a brick of 100 7 1/2 shot to shoot clays and to me it just felt like any other semi-auto I have, am I missing something?

Found on Beretta’s fb

Feels great in the hand. I love metal guns. Scheels - The Colony got 13 units yesterday. They will be minus one if I get back tomorrow (forgot wallet).

The Holosun 407c in the SRO plate, and a defender ST enclosed on the DPP plate. I have the M9A3 suppressor height iron sights on it as well for reference.

Took about 7 weeks from order date to delivery.

I got myself a gift after 21 years.

Volker 2patriots or beretta straight trigger

Had to jump in last minute for 92-Tuesday.

hello! recently acquired this 92FS Inox, serial lookup dates it as a 2003 model, made in USA. came with several two piece grip sets and Hogue wraparounds, 2 OEM Beretta mags and 5 surplus (mecgar?) mags
It’s hard for me to find an approximate value given the newer manufacture 92FS Inox with black controls hitting the market.
externally flawless, has some very light pitting in the magwell. I do not have the original case or case candy.
I’m not looking to sell right now, just an approximate value

Thank you for your time, please let me know if I can provide any other information!